• 한국해양공학회지
• /
• 제23권4호
• /
• pp.64-68
• /
• 2009

It has been observed that coated steel structures deteriorate more rapidly than the designed lifetime due to acid rain caused by air pollution, etc. Therefore, improving the corrosion resistance of anti-corrosive paint is very important in terms of safety and the economic point of view. In this study, the corrosion resistance of five kinds of anti-corrosive paints, including the Acryl, Fluorine, and Epoxy resin series, were investigated with electrochemical methods, such as corrosion potential measurements, polarization curves, diffusion limiting current density, etc. As a result, the corrosion resistance of the F101 specimen with the fluorine resin series was found to be superior to the other specimens, while E100 with the epoxy resin series also showed a somewhat good corrosion resistance. Furthermore, it was observed that the amount of water and oxygen entering the inner side of a painted film increased with an increase in immersion time, irrespective of the kind of resin series. However, the oxygen diffusion limiting current density of a specimen with good corrosion resistance was relatively decreased compared to other specimens, because of the difficulty of oxygen diffusion penetrating to the inner side of the film. Consequently it is suggested that we can qualitatively evaluate the corrosion resistance of an anti-corrosive paint by measuring the diffusion limiting current density as an electrochemical method.

• Corrosion Science and Technology
• /
• 제13권1호
• /
• pp.15-19
• /
• 2014

Recently, anti-fouling paints which does not include the poison components such as tin(Sn), copper(Cu) have been increasingly developed in order to inhibit the environmental contamination of the sea water. Moreover, the wear ratios of these anti-fouling paints are very important problem to prolong their life time in economical point of view. In this study, five types of anti-fouling paints as self polishing type were investigated on the relationship between their polarization characteristics and wear ratios. It was verified that there was apparently a good relationship between the wear ratio and polarization characteristics, for example, the wear ratio increased with increasing the impedance ratio, and increased or decreased with the corrosion potential shifting in the negative or positive direction respectively. In addition, the wear ratio decreased with decreasing the corrosion current density. Consequently, it is suggested that we can qualitatively expect the wear ratio by only measuring the polarization characteristics. Therefore, before the examination of the wear ratio was actually carried out in the field, the evaluation of polarization property in the laboratory may give a available reference data for their developments.

• Corrosion Science and Technology
• /
• 제15권1호
• /
• pp.28-37
• /
• 2016

Due to the increased construction of offshore concrete structures and the use of de-icing salts for the purpose of snow removal, the needs for the development of anti-corrosive concrete are increasing. To solve these problems, an evaluation of the mechanical and durability properties for concrete were conducted by mixing modified-sulfur as 0 %, 5 %, 10 %, 15 % cement weight ratio. Both strengths and the properties affecting durability such as water absorption coefficient, chloride ion permeability, accelerated carbonation resistance, rapid freezing and thawing, and chemical resistance were evaluated. All evaluations performed were according to the test specifications associated KS. The results indicate that mixing of modified-sulfur lowed chloride ion permeability and improved chemical resistance.

• 한국구조물진단유지관리공학회 논문집
• /
• 제9권1호
• /
• pp.217-223
• /
• 2005

본 연구는 철근 콘크리트를 염해 및 중성화로부터 보호하여 철근의 부식을 방지하기 위한 3종류 표면 보호재의 성능을 평가한 것으로서, 표면 보호재를 사용한 시험편의 부식저항성능과 중성화 저항 성능을 평가하였다. 실험결과 3종류의 표면 보호재를 사용한 시험편에서는 철근의 부식저항성능이 매우 우수하게 나타났으며, 중성화 방지 성능도 우수하게 나타났다. 특히 발수성의 프라이머와 마감 코팅재를 함께 사용한 시험편은 철근의 부식과 중성화를 매우 크게 감소 시켰다.

• 한국건설순환자원학회논문집
• /
• 제4권3호
• /
• pp.243-249
• /
• 2016

본 연구에서는 시멘트계 보수재 코팅이 철판의 부식 저항성에 미치는 영향을 평가하가 위해 보통 철판(Normal), 용접철판(Welding), 용접 후 보수재 철판(Welding & coating)의 세 가지 경우에 대하여 7일간 ICM(Impressed Current Method)를 통하여 부식을 촉진시켰다. 이후 Faraday 법칙을 통해 얻은 이론 부식률, 실험 부식률 그리고 부식 실험 후 측정한 휨 강도를 비교 평가하였다. Normal case와 Welding case에서는 약 70% 수준의 부식률이 측정되었으며, Welding & coating case에서는 약 17%정도의 부식률이 측정되었다. 이는 시멘트계 보수재료의 코팅이 염화물 이온의 침투를 효과적으로 차단하였으며 이로 인해 부식전류의 발생이 억제되었기 때문이다. 휨 강도 역시 부식률 평가와 같은 경향을 나타내었으며 Welding & coating case에서 Welding case 대비 약 3.4배 큰 강도가 평가되었다. 시멘트계 보수재 코팅이 용접부에 시행되면 용접부 철판의 부식 차단에 효과적일 것으로 판단된다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제17권6호
• /
• pp.95-103
• /
• 2013

비파괴 기법중 반전위 측정법은 부식가능성을 정량적으로 판별할 수 있으므로 꾸준하게 사용되고 있다. 본 연구에서는 피복두께를 10, 30, 60mm, 물-시멘트비를 0.35, 0.55, 0.70으로 변화시킨 RC 시편을 대상으로 비말대 지역을 모사한 촉진염해분무실험을 수행하였다. 45일간의 촉진 염해 분무시험을 수행한 뒤, RC 시편에 대하여 반전위값을 측정하였다. w/c 0.55 조건에서 피복두께가 10mm인 RC 시편은 부식이 발생하였으며, w/c 0.7인 경우 피복두께 30mm인 시편에서도 부식이 발생하였다. 실험결과를 이용하여 물-시멘트비와 피복두께를 변수로 하는 반전위 평가식을 제안하였으며, 비말대지역에서 부식을 억제할 수 있는 조건을 도출하였다. 또한 Life 365 프로그램을 이용하여 비부식 조건의 w/c와 피복두께를 분석하였으며, 본 연구의 결과인 반전위 측정값과 비교하였다.

• 열처리공학회지
• /
• 제34권6호
• /
• pp.265-271
• /
• 2021

In this study, anti-tarnishing and corrosion characteristics of a single 𝛽1' and Bangjja Yugi alloy in the Cl^- ion environment before and after potentiostatic electrolysis treatment were compared. Stable and uniform SnO₂ oxide film with several nanometer thickness is formed after potentiostatic electrolysis treatment. In the case of Bangjja Yugi prior to potentiostatic electrolysis (PE) treatment for exposure in Cl^- environment, tarnishing occurs rapidly within 0.5hr, whereas PE treated Bangjja Yugi indicates stable surface without tarnishing up to 3hr. Especially, it is noticeable that anti-tarnishing and corrosion characteristic of PE treated single 𝛽1', which were significantly improved by 3 times and 15 times, respectively, compared to conventional Bangja Yugi.

• 보존과학회지
• /
• 제36권2호
• /
• pp.82-92
• /
• 2020

현대 미술작품은 재료와 제작기법, 종류가 매우 다양하게 사용되고 있으며 특히 조각작품 중 많은 비율을 차지하는 금속의 경우 형태가 다양하고 여러 재질과 혼합된 작품이 다수 존재한다. 이러한 구조적, 재료적 특성은 보존처리 시 기존의 처리 방법을 적용하기 어려운 경우가 많아 보다 다양한 처리 재료 및 방법이 요구된다. 본 연구에서는 금속 작품의 효과적인 보존처리를 위해 방청제(Rust inhibitor, 防錆劑)를 작품에 직접적으로 도포하는 방법이 아닌 기화성 방청제를 적용하였으며, 기화성 방청제 및 이를 함유한 방청필름의 방청효과를 평가하였다. 금속 시편을 대상으로 기화성 방청제를 적용한 방청처리 결과, 시편의 색도 변화는 미미하였으며, 부식 속도는 방청 미처리 시편과 비교하였을 때 절반 정도 감소하는 것을 확인하였다. 방청필름 적용 실험 결과, 방청필름 사용 시 미처리 및 폴리에틸렌 필름을 사용한 시편보다 부식화합물의 발생이 감소하였다. 접촉각 및 표면에너지, 표면전기저항 측정을 통해 표면의 물성을 측정하였으며 방청피막이 형성됨을 확인하였다. 또한 기화성 방청제 및 방청필름을 실제 조각작품에 적용하여 방청효과를 확인하였다.

• 한국군사과학기술학회지
• /
• 제27권4호
• /
• pp.457-465
• /
• 2024

The Remote Control Munition System is a anti-personnel munitions system to replace land mines that are hard to retrieve and can inflict damage on friendly forces and civilians. As operating environments and methods change, quality improvement is necessary to ensure appropriate durability. Therefore, corrosion resistance evaluation was performed according to the surface treatment of ALDC12, the main assembly material. We conduct the potentiodynamic polarization, cyclic corrosion test to perform analysis on corrosion behavior. Additionally, we try to observe the pitting on the surface through SEM analysis. In conclusion, among the three surface treatments, Anodizing surface treatment is judged to be the most suitable for corrosion durability in a field environment.

• 한국표면공학회지
• /
• 제54권6호
• /
• pp.371-379
• /
• 2021

The use of anti-corrosive oil (AC) is inevitable for production of industrial steels to prevent corrosion. The AC is degreased before application of steels, which crucially effects on final products, such as automobile, electricity etc. However, qualitative/quantitative evaluation of degreasing performance are steal insufficient. In this study, degreasing performance of anti-corrosive oil on steel have been studied through X-ray photon spectroscopy (XPS) and electrochemical impedance spectroscopy (EIS). Commercial automotive steels (AMS) are coated with 4 different anti-corrosive oils (namely AC1-AC4). In XPS, intensity of C1s peak remained after degreasing indirectly indicates incomplete degreasing. Thus, higher C1s peak intensity means less effective degreasing by degreasing agent. peak intensity of C1s peak shows opposite tendency of peak intensity of O1s. We found that EIS analysis is not applicable to mild steel (such as AMS1) due to corrosion during measurement. However, alloy steel can be fully analyzed by EIS and XPS depth profile.