• 한국통신학회논문지
• /
• 제19권3호
• /
• pp.515-522
• /
• 1994

원뿔형 컬러게이트 급전 혼의 복사특성을 가우시안 빔 모드이론으로 해석한다. 혼 개구면의 전계를 Gaussian-Laguerre모드로 전개하며, 이 모드가 파동방정식의 해임을 밝히고, 모드 확장계수에 의하여 개구면의 전개를 계산함으로써, 종래의 기본모드에 의한 복사특성 해석의 오차를 줄일 수 있게 한다. C-밴드, Ku-밴드 및 밀리미터파 대역에서 동작하는 컬러게이트 혼 안테나의 복사패턴을 계산하였다. 각 벤드에 대하여 계산한 복사패턴은 벡터 포텐실 적분법에 의하여 구한 복사패턴 및 6.175GHz에서의 실측치 등과 잘 일치한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 C
• /
• pp.1638-1640
• /
• 2003

In the recent years, UHF PD measuring technique for detecting partial discharges was proved the effective method for Gas Insulated Switchgear (GIS). However, in case of GIS with a metal flange around insulating spacer, UHF PD measurement using typical external UHF PD sensor is difficult. In this paper, a novel hole-type UHF PD sensor based on Archimedean spiral antenna theory has been proposed and realized. All spacers with metal flange have small hole in order to inject epoxy. Using the novel hole-type UHF PD sensor, it makes detection possible to PD signal that are emitted through the epoxy injection hole. Additionally, the measuring characteristic of UHF PD signals from several artificial defects in GIS and the novel ${\Phi}$-f-q pattern analysis technology are discussed.

• 한국군사과학기술학회지
• /
• 제22권2호
• /
• pp.151-161
• /
• 2019

In this study, to evaluate the High Altitude Electromagnetic Pulse(HEMP) protection performance of UHPC/CNT composites by the content of Carbon nanotubes(CNTs), Electromagnetic Shielding Effectiveness(SE) test was performed based on MIL-STD-188-125-1. And the results were verified by applying the Antenna theory. In the case of UHPC with a thickness of 200 mm mixed with 1 % CNT of cement weight, the SE was 28.98 dB at 10 kHz and 45.94 dB at 1 GHz. Then the Scabbing limit thickness for bullet proof was computed based on the result of compressive strength test which was 170 MPa, and it was examined whether it satisfied the HEMP protection criteria. As a result, the required HEMP shielding criteria were satisfied in all frequency ranges as well as the scabbing limit thickness was reduced by up to 43 % compared with that of ordinary concrete.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1435-1439
• /
• 2004

Most recently, CP(Cellular Phone) has been one of the most important technologies in the IT(Information Tech-nology) field, and it is situated in a position of great importance industrially and economically. To produce the best CP in the world, a new technological concept and its advanced implementation technique is required, due to the extreme level of competition in the world market. The RT(Robot Technology) has been developed as the next generation of a future technology. Current robots require advanced technology, such as soft computing, human-friendly interface, interaction technique, speech recognition, object recognition etc. unlike the industrial robots of the past. Therefore, this paper explains conceptual research for development of the RCP(Robotic Cellular Phone), a new technological concept, in which a synergy effect is generated by the merging of IT & RT. RCP infra consists of $RCP^{Mobility}$ $RCP^{Interaction}$, $RCP^{Integration}$ technologies. For $RCP^{Mobility}$, human-friendly motion automation and personal service with walking and arming ability are developed. $RCP^{Interaction}$ ability is achieved by modeling an emotion-generating engine and $RCP^{Integration}$ that recognizes environmental and self conditions is developed. By joining intelligent algorithms and CP communication network with the three base modules, a RCP system is constructed. Especially, the RCP mobility system is focused in this paper. $RCP^{Mobility}$ is to apply a mobility technology, which is popular robot technology, to CP and combine human-friendly motion and navigation function to CP. It develops a new technological application system of auto-charging and real-world entertainment function etc. This technology can make a CP companion pet robot. It is an automation of human-friendly motions such as opening and closing of CPs, rotation of antenna, manipulation and wheel-walking. It's target is the implementation of wheel and manipulator functions that can give service to humans with human-friendly motion. So, this paper presents the definition, the basic theory and experiment results of the RCP mobility system. We confirm a good performance of the RCP mobility system through the experiment results.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제14권1호
• /
• pp.93-113
• /
• 2020

According to information theory, non-orthogonal transmission can achieve the multiple-user channel capacity with an onion-peeling like successive interference cancellation (SIC) based detection followed by a capacity approaching channel code. However, in multiple antenna system, due to the unideal characteristic of the SIC detector, the residual interference propagated to the next detection stage will significantly degrade the detection performance of spatial data layers. To overcome this problem, we proposed a modified power-domain non-orthogonal multiple access (P-NOMA) scheme joint designed with space-time coding for multiple input multiple output (MIMO) NOMA system. First, with proper power allocation for each user, inter-user signals can be separated from each other for NOMA detection. Second, a well-designed quasi-orthogonal space-time block code (QO-STBC) was employed to facilitate the SIC-based MIMO detection of spatial data layers within each user. Last, we proposed an optimization algorithm to assign channel coding rates to balance the bit error rate (BER) performance of those spatial data layers for each user. Link-level performance simulation results demonstrate that the proposed time-space-power domain joint transmission scheme performs better than the traditional P-NOMA scheme. Furthermore, the proposed algorithm is of low complexity and easy to implement.

• 한국통신학회논문지
• /
• 제38A권12호
• /
• pp.1102-1109
• /
• 2013

블라인드 간섭 정렬 (Blind Interference Alignment: BIA) 기법은 기지국과 사용자 간의 채널 상태 정보(Channel State Information: CSI)가 부재한 상황에서도 최대의 다중화 (Degrees of Freedom: DoF) 이득을 얻을 수 있는 전송 방식이다. 하지만 BIA 기법은 다중화 이득의 극대화를 통해 높은 신호 대 잡음비 영역에서는 좋은 합 전송률 성능을 나타내는 반면, 신호 대 잡음비가 낮은 영역에서는 성능이 크게 열화되는 단점이 있다. 본 논문에서는 BIA 기법이 갖는 단점을 극복하기 위하여, BIA 기법과 수신 모드 선택 기법 기반의 단일 사용자 SISO 전송 기법을 신호 대 잡음비에 따라 적응적으로 사용하는 이중 전송 기법을 제안한다. 먼저, 각 전송 기법의 평균 합 전송률의 닫힌 형태를 유도하며, 이를 기반으로 신호 대 잡음비에 따라 각 사용자의 전송 기법을 선택하는 저 복잡도 알고리즘을 제안한다.

• 대한전자공학회논문지TC
• /
• 제41권12호
• /
• pp.1-7
• /
• 2004

본 연구는 24GHz 측방설치 차량감지용 레이다를 개발하였다. 다차선에 존재하는 차량들의 속도 측정 및 차량 분류를 위해 24GHz 송수신 모듈을 개발하였고, 신호처리부에 새로운 신호처리 알고리즘을 적용하였다. 본 논문은 고정된 FMCW (Frequency Modulated Continuous Wave) 레이다 모듈로써, 동작원리 이론과 알고리즘에 대해 측정된 데이터를 나타내었다. 측정된 결과는, 가변 threshold 추출 방법을 이용하여 한 차선의 차량 속도에 대해 95%의 정확성과 두 차선에 대해서는 90%의 정확성을 보였다. 또한, 차량의 분류는 소형, 중형, 대형의 3종 분류로 약 89%의 정확성을 나타내었다.

• 한국전자파학회논문지
• /
• 제29권4호
• /
• pp.308-315
• /
• 2018

본 논문에서는 두 표적 간의 거리차를 정밀하게 계측할 수 있는 S-band 고 분해능 레이다 개발을 위한 시스템 기본 설계 및 구현 결과를 제시한다. 3.5 GHz LFM(Linear Frequency Modulation) 레이다 기본 설계를 위하여 제안하는 시스템 요구조건은 거리 분해능 1 m, 최대 계측 거리 2 km이며 레이다 방정식을 통해 각 모듈의 사양을 결정하였다. 최종적으로 150 MHz 대역폭, 송신 출력 43 dBm 전력 증폭기, 이득 26 dBi 안테나, 잡음 지수 8 dB 이하, RCS $1m^2$일 때, 표적과 레이다의 최대거리 2 km 기준 SNR이 30 dB 이상이 나올 수 있음을 확인할 수 있었다. 시뮬레이션 결과를 토대로 하드웨어 설계를 하였으며, SDR(Software Defined Radar) 장비를 이용한 LFM 레이다 설계 이론과 방법 그리고 야외 시험 결과를 보여주고 요구조건을 만족하는 레이다 시스템 설계가 가능함을 입증하였다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제10권7호
• /
• pp.2972-2991
• /
• 2016

WLAN is the best choice in the place where complex network is hard to set up. Intelligent terminals are more and more assembled in some areas now. However, according to IEEE 802.11n/802.11ac, the access-point (AP) can only serve one user at a single frequency channel. The spectrum efficiency urgently needs to be improved. In theory, AP with multi-antenna can serve multiple users if these users do not interfere with each other. In this paper, we propose a user clustering scheme that could achieve multi-user selection through the mutual cooperation among users. We focus on two points, one is to achieve multi-user communication with multiple antennas technique at a single frequency channel, and the other one is to use a way of distributed users' collaboration to determine the multi-user selection for user clustering. Firstly, we use the CSMA/CA protocol to select the first user, and then we set this user as a source node using users' cooperation to search other proper users. With the help of the users' broadcast cooperation, we can search and select other appropriate user (while the number of access users is limited by the number of antennas in AP) to access AP with the first user simultaneously. In the network node searching, we propose a maximum degree energy routing searching algorithm, which uses the shortest time and traverses as many users as possible. We carried out the necessary analysis and simulation to prove the feasibility of the scheme. We hope this work may provide a new idea for the solution of the multiple access problem.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2002년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.587-592
• /
• 2002

A new digital correlator fur an airborne synthetic aperture radiometer was designed in order to replace the conventional analog correlator unit which will become very complicated while the number of channels is increasing. The digital correlator uses digital IQ demodulator instead of the intermediate frequency (IF) phase shifter to make the correlation processing performed digitally at base band instead of analogly at IF. This technique has been applied to the digital receiver in softradio. The down-converted IF signals from each pair of receiver channels become low rate base-band digital signals after under-sampled, Digitally Down-Converted (DDC), decimated and filtered by FIR filters. The digital signals are further processed by two digital multipliers (complex correlation), the products are integrated by the integrators and finally the outputs from the integrators compose of the real part and the imaginary part of a sample of the visibility function. This design is tested by comparing the results from digital correlators and that from analog correlators. They are agreed with each other very well. Due to the fact that the digital correlators are realized with the help of Analog-Digital Converter (ADC) chips and the FPGA technology, the realized volume, mass, power consumption and complexity turned out to be greatly reduced compared with that of the analog correlators. Simulations show that the resolution of ADC has an influence on the synthesized antenna patterns, but this can be neglected if more than 2bit is used.