• Journal of Electrical Engineering and Technology
• /
• v.7 no.3
• /
• pp.389-395
• /
• 2012

In this paper, we analyzed the frequency spectrum of the electromagnetic waves radiated by an electric discharge as a basic study to develop an on-line diagnostic technique for power equipment installed inside closed-switchboards. In order to simulate local and series arc discharges caused by an electric field concentration and poor connections, three types of electrode systems were fabricated, consisting of needle and plane electrodes and an arc generator meeting the specifications of UL 1699. The experiment was carried out in an electromagnetic anechoic chamber, and the measurement system consisted of a PD free transformer, a loop antenna with a frequency bandwidth of 150 kHz-30 MHz, an ultra log periodic antenna with a frequency bandwidth of 30 MHz-2 GHz, and an EMI test receiver with a frequency bandwidth of 3 Hz-3 GHz. According to the experimental results, the frequency spectra of the electrical discharges were widely distributed across a range of 150 kHz-400 MHz, depending on the defects, while commonly found between 150 kHz and 10 MHz. Therefore, considering the ambient noise and antenna characteristics, the best frequency bandwidth for a measurement system to monitor abnormal conditions by detecting electromagnetic waves in closedswitchboards is 150 kHz-10 MHz.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.10
• /
• pp.1008-1016
• /
• 2013

SAR measurement which was applied only to the mobile phone has been expanded in the Korean radio regulation law to the portable wireless communication equipments within 20 cm from the human body since Jan. 2012. The two-way radio operating at 150 MHz frequency band was newly included following the revised radio regulation in the target equipment of measurement. SAR measurement system at 150 MHz satisfying this regulation is necessary accordingly for SAR conformity assessment. The international SAR measurement standard(IEC 62209-2) includes the evaluation method on frequencies above 300 MHz, and the commercial SAR measurement system can measure SAR above 300 MHz only. The size of the reference dipole antenna(760 mm, return loss: -27.57 dB) and flat phantom ($1,300 mm(L){\times}900 mm(W){\times}200 mm(H)$), targeted SAR values for numerical analysis(1 g: 1.08 W/kg, 10 g: 0.77 W/kg) for SAR validation evaluation at 150 MHz frequency are proposed in this paper. The suggested dipole antenna and flat phantom are assembled and used to verify the conformity assessment of commercial SAR measurement system. The measured SAR values of 1 g and 10 g were obtained respectively to be 1.13 W/kg, 0.81 W/kg, and they satisfied the effective range(within ${\pm}10$ %) of IEC international standard. The standards based on this study are expected to be used for the domestic SAR measurement standard and IEC(International Electrotechnical Commission) international standard.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.3
• /
• pp.253-260
• /
• 2016

This paper proposes a planar Log-Periodic Dipole Array(LPDA) antenna with light-weight supporting structure for installing on an aircraft. The proposed antenna is designed by applying a planar skeleton supporting structure that has light-weight for an aircraft and is capable of withstanding structural vibration. The material of the planar skeleton supporting structure is a Polyether ether ketone(Peek) which has excellent characteristics on strength and temperature. The proposed antenna is fabricated by attaching the radiating elements of the LPDA on both sides of the supporting structure. The changed input impedance due to the dielectric material of the supporting structure was compensated for by controlling the distance and length of several radiating elements. The 10-dB return loss bandwidths of the designed planar LPDA antenna with light-weight supporting structure are obtained as 0.4~3.1 GHz(7.3:1) in the simulation and 0.41~3.5 GHz(8.2:1) in the measurement. The average gains in 0.5~3 GHz band are 6.77 dBi in the simulation and 6.55 dBi in the measurement. Therefore, we confirm that the designed antenna is appropriate to be installed on an aircraft due to its light-weight structure and wideband directional radiation characteristics.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.7 no.4
• /
• pp.188-194
• /
• 2014

In this paper, an antenna which has quad band in LTE (0.746 ~ 0.798 GHz), GSM(0.824 ~ 0.960 GHz), DCS(1.71 ~ 1.88 GHz), WCDMA(1.91 ~ 2.17 GHz) is proposed. An antenna size is $122mm{\times}50mm{\times}0.8mm$ on FR4(${\epsilon}_r=4.4$) ground substrate. In the proposed antenna, branch line is applied to the conventional PIFA architecture to achieve multi-bandwidth. Coupling power supply is applied for a wide bandwidth. Result of the measurement is as follows. When the low frequency, the antenna presents gain of 0.93 ~ 1.92dBi, and radiation efficiency of 49.60 ~ 76.35 %, and When the high frequency, gain is 2.19 ~ 4.66dBi, and radiation efficiency is 60.40 ~ 80.01 %, and with a VSWR < 2 (${\leq}-10dB$)measurement results for standard satisfies all band. Judging from the result, proposed multiband antenna is expected to be applied. B4G mobile terminals since the antenna shows an outstanding performance.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2000.11a
• /
• pp.408-412
• /
• 2000

In this paper, we present the design and measurement of a collinear dipole array (CDA) operating in the 2.4 GHz ISM band. The array is consisted of six collinear dipoles joined by phasing coils. A cmmercial software is used to design the antenna with an optimum performance. The designed array is fabricated and is measured to confirm the design.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.3
• /
• pp.233-238
• /
• 2013

In this paper, a novel diversity and directivity mode-switchable planar antenna array is proposed. For the diversity mode, four elements are unfolded on the plane and high isolation can be achieved. On the other hand, the antenna function is changed to the directivity mode when they are folded and stacked. Each element works such as a stacked Yagi-Uda antenna with high directivity. Especially, the curved feed line as well as the hybrid feeding method is used to improve performances. The simulation results agree well with measurement results and it is successfully demonstrated that two modes are properly working at 2.4 GHz.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.3
• /
• pp.320-327
• /
• 2012

In this paper, a novel ultra wide band(UWB) antenna with tri-band notch capability is proposed. The proposed antenna can reject WiMAX(3.3~3.7 GHz), WLAN IEEE 802.11a/n(5.15~5.825 GHz), and ITU(8.025~8.4 GHz) bands. Band rejection capability is achieved only split ring resonators(SRRs) and complementary SRRs(CSRRs). The SRR under the radiating patch, the CSRR loaded on the radiating patch, and the CSRRs on the ground of the CPW feeding reject the WiMAX, WLAN, and ITU bands, respectively. The simulation and measurement results demonstrate the performances of the proposed antenna.

• Current Industrial and Technological Trends in Aerospace
• /
• v.8 no.2
• /
• pp.39-45
• /
• 2010

Satellites are generally put in horizontal configuration to install a weighty, large and deploying SAR antenna which is required precise alignment. It is not to damage an antenna deployment mechanism from impellent strength as SAR antenna rotation axis is aligned with the gravity axis and SAR antenna is put in a zero gravity condition. In order to install such a deploying antenna, satellite should be a same condition of the vertical configuration without the deflection of satellite when it is rotated horizontally. In this paper, it is shown how to measure the deflection of satellite and how to get a reaction force value for compensating the deflection.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.10 s.113
• /
• pp.1007-1019
• /
• 2006

In this paper, the synthesis method of multibeam radiation pattern with multi-directional beams and nulls is proposed. Genetic algorithm is applied for the optimization of amplitude and phase of the feeding signal into each element that is structured in planar array of single patch antenna with an arbitrary field distribution. To verify the validity of the proposed method, $2{\times}2$ planar array antenna is used for the measurement and the measured far field radiation pattern is compared with the simulation result. As a result, the synthesis of multibeam radiation pattern is implemented by the optimization of amplitude and phase of the feeding signal into each element of $8{\times}8$ planar array antenna system.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2005.11a
• /
• pp.317-322
• /
• 2005

Synthetic Aperture Radars(SAR) are used mainly for high-resolution imaging of the terrain. This paper describes the 16$\times$16 array antenna designed for an X-band, automobile-based SAR(AutoSAR) system. This antenna has the structure of several layers such as radome, radiators, slots, feed network, and honeycomb cores. Each layer is adhesively bonded to meet different combination of structural and electrical design requirements. Using the Strip-Slot-Foam-Inverted-Patch(SSFIP) structure and dogbone slots, a wide bandwidth and a structural hardness were achieved. Measurement results were compared with simulation results. It was observed that the SAR antenna had a bandwidth of 1.7 GHz, side-lobe levels of less than -20 dB, half-power beamwidth of 5$^{\circ}$, and gains of 25.0 dBi. The observed results show that the designed array antenna is suitable for the broadband AutoSAR system.