• 전자공학회논문지A
• /
• 제28A권10호
• /
• pp.799-805
• /
• 1991

In this paper, the analysis and design of a spirally slotted array antenna with high efficiency are presented. Electric fields in the slots are calculated by electromagnetic fields in the upper waveguide and radiation field equations are derived. Slots are arrayed spirally on the upper circular plate of twofold radial waveguide. In order to suppress grating lobes from the array, a slow wave structure is inserted in the upper waveguide. This antenna is characterized by a good circular polarization, high efficiency of 75 percent and grating lobes below -34dB.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(1)
• /
• pp.267-270
• /
• 2000

The feasibility of small linear antenna for near range wireless communications was studied. The requirement of the system are frequency range 9∼12 MHz and antenna size 15 cm. The communication range is about 15 m. The antenna input impedance is very small radiation resistance and very large capacitive reactance. The lossless impedance matching is nearly impossible, therefore lossy matching is considered. The antenna has very low radiation efficiency. The near field calculation has a large uncertainty, but the results can be used as the guideline of a small linear antenna system for a near range wireless communication.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 하계종합학술대회 논문집(1)
• /
• pp.193-196
• /
• 2004

This paper have a whole azimuth Omni-directional radiation pattern and will become the good radiation efficiency for applies in the steeve antenna and form which is the appearance. We contain by whole course of actual implement model to antenna design. And we will confirm the efficiency the analysis of the antenna to design and through a simulated experiment according to the implementation Ideal characteristic of the antenna to be used between 3.1 and 10.6 GHz of UWB.

• Journal of electromagnetic engineering and science
• /
• 제17권4호
• /
• pp.228-232
• /
• 2017

The radiation properties and fabrication precautions of a 3D printed, electrically small folded spherical meander wire monopole antenna are investigated. The antenna is self-resonant and shows sufficiently high radiation efficiency at an electrical size ka of 0.4, with the radiation quality factor Q approaching the lower physical bound. In antenna fabrication, the possible structural deformation due to gravity is examined before the antenna frame is 3D-printed. The required conductivity is achieved by multiple manual paintings of a silver paste. The radiation efficiency and pattern show very good agreement with the computed expectations, whereas the resonant frequency deviates by 11.8%. The method to minimize such a fabrication error when using 3D printing technology for wire antennas is discussed.

• 반도체디스플레이기술학회지
• /
• 제20권4호
• /
• pp.102-107
• /
• 2021

In this paper, the measurements of received power was shown and compared in two developed 5.8GHz 25W wireless charging systems. One is the system using commercial transmission antenna, and the other is the system using transmission antenna combined with metamaterial. The system combined with metamaterial shows higher received power due to negative reflective index of metamaterial. In addition, a comparative analysis of the systems shows that the transmission efficiency in the systems can decrease the real gain of transmission antenna due to higher side robe of beam pattern. The side robe beams of transmitting antenna interferes transmitted beam with the reflected beams from the bottom region due to the side robes. The failure problems of the RF wireless charging systems are discussed and proposed in order to charge mobile devices through the RF wireless charging system.

• 한국전자파학회논문지
• /
• 제18권8호
• /
• pp.943-953
• /
• 2007

본 논문에서는 Ka-band에서 동작하는 스칼라 급전 혼을 가진 카셋그레인 안테나를 개발하였다. 카셋그레인 안테나의 효과적인 EM 시뮬레이션을 위해 계산된 급전 혼의 근거리장을 표면 등가 이론을 이용하여 카셋그레인의 등가 전원으로 사용하였다. 급전 혼은 $HE_{11}$ 모드로 동작하는 주름 원형 혼 안테나를 사용하였으며, 카셋그레인의 주 부경 각도 및 급전 중심점을 안테나 효율이 최대가 되도록 설계하였다. 제안된 급전 혼 안테나는 33 GHz에서 19 dBi 이득을 보이며, 부엽의 크기는 -25dB 이하, $20^{\circ}$의 반전력 빔 폭을 가졌다. 카셋그레인 안테나는 33GHz에서 41 dBi 이득을 가져 60%의 안테나 효율을 보이며 부엽기 크기는 -20dB 이하, $1.2^{\circ}$의 반전력 빔 폭을 보였다.

• 한국전자파학회논문지
• /
• 제10권1호
• /
• pp.122-132
• /
• 1999

본 논문에서는 37~40 GHz 대의 직경 30 cm의 소형 경면수정 ADE 반사경 안테나를 설계 제작하고 복사 특성을 고찰하였다 안테나 설계시 개구면 전계분포는 균일분포와 포물분포가 결합된 전계분포로 가정하고 빔폭, 개구연효율, 사이드로브 레벨 특성의 변화를 고찰하고 이것을 설계에 이용할 수 있도록 하였다. 설계 제작된 안테나의 이득과 사이드로브 레벨은 40 GHz에서 39.9 dBi(효율 : 61.9 %)와 -18.8 dB로 측정되었다. 이는 설계시 목표했던 효율 60 % 이상, 사이드로브 레벨 -20 dB 이하에 근접한 것으로 나타났다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 영호남 합동 학술대회 및 춘계학술대회 논문집 센서 박막 기술교육
• /
• pp.77-81
• /
• 2006

We report the performance of a four-element, 11.67 GHz, high-Tc superconducting (HTS) microstrip antenna array with corporate feed network and circular polarization for direct broadcasting satellite (DBS) system. Our array antennas were designed and built on a 0.5 mm thick MgO substrate. To compare the superconducting antennas with normal conducting counterpart, One antenna pattern was fabricated from gold thin film, and a second pattern was fabricated from $YBa_2Cu_3O_{7-x}$ (YBCO) superconducting thin film. To improve the axial ratio of circularly polarized arrays, sequential rotation technique were used. Efficiency, radiation pattern, return loss and bandwidth were measured for both antennas at room temperature and at cryogenic temperature. The array produced good circular polarization, and the gain of the array at 77 K, relative to a copper array at room temperature was approximately 1.54 dB. The measured return loss of our HTS antenna array was 35.79 dB at the resonant frequency of 11.67 GHz and The total effective bandwidth was about 3.4 %. The results showed that high-temperature superconductors, when used in microstrip arrays, improved the efficiency of the HTS antenna array for circularly polarization.

• 한국통신학회논문지
• /
• 제25권3A호
• /
• pp.435-442
• /
• 2000

In this paper, we analyzed RF-DC conversion efficiency for the dual -polarization rectenna and the antenna position changing. Dual-Polarization rectenna consist of a two major parts, receiving antenna and rectifying circuits. We made dual-polarization 2.45GHz rectenna using the two dipole antennas and patch antenna. Rectifying circuit is consisted by a Schottky-Barrier diode with a large forward current and reverse breakdown voltage. The results of RF-DC conversion efficiency for the each of designed dual-polarization rectenna has 69.1% with 360$\Omega$(dipole type) and 75.4% with 340$\Omega$(patch type ) optimum load resistor. When the each of dual-polarization rectenna has optimal load resistor, it's conversion efficiency shows of $\pm$20% in dipole type and $\pm$5 in patch type at 0~180。position.

• 한국정보통신학회논문지
• /
• 제17권9호
• /
• pp.2139-2144
• /
• 2013

본 논문에서는 평판안테나를 사용한 저비용, 고효율 추적안테나에 구현에 대한 가능성을 분석하였다. 추적안테나는 4개의 평판안테나, 비교기, 추적수신기, 제어기로 구성된다. 안테나 배열에 따른 입사되는 전파의 세기 및 위상을 분석하였다. 또한 추적수신기에서 출력되는 신호를 분석하여, 추적가능 범위를 제시하였다. 추적수신기는 고각과 방위각 2개의 수신 경로를 설계하여 2개의 경로에서 발생하는 오차를 최소화하였다. 분석결과 -3도~+3도의 추적범위를 가지며, 구현이 가능하다.