• Journal of Advanced Navigation Technology
• /
• v.23 no.5
• /
• pp.430-436
• /
• 2019

It is needed to develop an antenna with features of subminiature, light weight and multi-band operation for the variaty services in maritime and industrial fields. The PCB pattern antenna is one of the appropreiate antennas solving these requirements. In this research, the design and fabrication of the PCB pattern antenna operating on the single band of 920 MHz are investigated. The final goal is that the development of the dual band PCB pattern antenna operating on 260 MHz and 920 MHz, which is based on the proposed antenna. It is evident that the performance in the frequencies of 902 MHz, 915 MHz and 928 MHz among of 920 MHz ISM band is better than that in other frequencies. It is also confirmed that the differences of the voltage standing wave ratio, return loss, gain and efficiency between three frequencies are less than 5%. It is expected that the development of communication link of 5-10 km is possible when the induced results are applied into the low power wide area (LPWA) network desinged by the rule of -30 dB sensitivity.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.19 no.1
• /
• pp.25-30
• /
• 2024

The modern society has become full-fledged entry into the information age since spread of Internet. In the information age, internet was developed from the wired access to the wireless Internet access. When a surge in demand for wireless Internet access, efficiency and performance of 2.4GHz band which leads to saturation of the communication was significantly fall. Accordingly, the communication of the 5GHz band came to be interested. In this paper, we studied the design and fabrication of u-slot microstrip patch antenna to be used in wireless communication systems operating at around 5GHz band. To obtain antenna parameters such as patch size, inter patch space, antenna was simulated by HFSS(High Frequency Structure Simulator). From these parameters, u-slot microstrip antenna is fabricated using FR-4 substrate of dielectric constant 4.4. The characteristics of fabricated antenna were analyzed by network analyzer.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.30 no.1
• /
• pp.17-22
• /
• 2017

In this study, we designed the metallic reception part of a patch antenna using the phase field design method. The design object function is formulated with the S-parameter value which represent the return loss so that it is targeted to maximize radiation efficiency at a target frequency. The initial model of a patch antenna was designed via the ordinary theory based approach and its performance was enhanced by changing the structural configuration of the metallic part using the phase field design method combined with the double well potential functions. The final shape was proposed by removing the gray scale area along the structural boundary by employing a cut-off method. The proposed shape shows that the radiation efficiency at target frequency is significantly improved compared with the initial patch shape. The finite element analysis and optimization precess was performed using the commercial package COMSOL and Matlab programming.

• Journal of electromagnetic engineering and science
• /
• v.5 no.3
• /
• pp.126-131
• /
• 2005

To increase the efficiency of an applicator during microwave hyperthermia therapy, first, the length from the antenna end to a slot is varied to get the optimal matching of the characteristic impedance at the frequency of 2.45 GHz. Using the electric and thermal constants of biological tissue, we compose a phantom to calculate temperature increment as well as the resonance characteristics and the SAR distributions. The proposed 3-slot sleeve antenna inserted in an applicator plays an effective role in increasing the therapy size in the view of heating performance as electromagnetic energy tends to concentrate on not feed point direction but treatment area. The SAR is then used in combination with a finite difference heat transfer equation to determine the temperature distribution. Also, in order to shorten treatment time and increase therapy size, a square-array structure is suggested and analyzed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.4B
• /
• pp.215-223
• /
• 2008

Retransmission signals from relays to destination when the destination fails to decode received signal from the source in Automatic Repeat Request (ARQ) protocol make the destination receive signals more reliably. With using omni -direction antenna in the practical system, in communication range of both the source antenna and the destination antenna, there are some relays that can be used to transmit signal to the destination. However, using all relays to transmit signal consume power and bandwidth. In this paper, we propose a new protocol in which the best relays are chosen based on threshold of distance from the source to the relay and the relay to the destination when the relays use decode- and forward (DF) protocol. Simulation results prove the efficiency of the protocol when we compare using only the best relays with using all relays to transmit signal to the destination.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.51 no.12
• /
• pp.573-577
• /
• 2002

We designed wideband HTS antennas which consists of two triangle -radiation patches using a $YBa_2Cu_3O_{7-X}$ (YBCO) superconducting thin film. The major limitation of high-Tc superconducting (HTS) microstrip antennas is the narrow bandwidth due to the high Q and thin substrate. Defining bandwidth as the frequency range over which standing wave ratio (SWR) 2:1 or less, HTS antenna bandwidths are typically 0.85 % to 1.1 %. Thus considerable effort has been focused on developing antennas for broadband operation. To calculate input impedance and design of the broadband HTS antennas a moment method technique was used. The HTS antenna fabricated in this work was designed for K-band, which is useful band for satellite to satellite communications. The bandwidth obtained was a significant 6.7 % and the other measured performance of our HTS antenna, including the bandwidth, radiation Pattern, efficiency, standing wave ratio (SWR) and return losses was reported.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07a
• /
• pp.523-526
• /
• 2002

We designed wideband HTS antennas which consists of two triangle-radiation patches using a YBa$_2$Cu$_3$O$\sub$7-x/ (YBCO) superconducting thin film. The major limitation of high-Tc superconducting (HTS) microstrip antennas is the narrow bandwidth due to the high Q and thin substrate. Defining bandwidth as the frequency range over which standing wave ratio (SWR) 2:1 or less, HTS antenna bandwidths are typically 0.85% to 1.1%. Thus considerable effort has been focused on developing antennas for broadband operation. To calculate input impedance and design of the broadband HTS antennas a moment method technique was used. The HTS antenna fabricated in this work was designed for K-band, which is useful band for satellite-to-satellite communications. The bandwidth obtained was a significant 6.7% and the other measured performance of our HTS antenna, including the bandwidth, radiation Pattern, efficiency, standing wave ratio (SWR) and return losses was reported.

• Journal of electromagnetic engineering and science
• /
• v.1 no.1
• /
• pp.11-17
• /
• 2001

In this paper, spherical Luneburg lens antennas have been systematically analyzed using the Eigenfunction Expansion Method (EEM), The developed technique has capability of performing a complete 3-D analysis to characterize the multi-layered dielectric spherical lens with arbitrary permittivity and permeability. This paper describes the analysis technique, and presents the results of the parametric study of Luneburg lens antennas by varying design parameters suoh as the diameter of the lens antenna (up to 80 wavelength), number of spherical shells (up to 30 shells), air-gaps between spherical shells, and dielectric loss of the material. Many representative engineering design curves including the far-field patterns, wide-angle sidelobe characterizations, antenna efficiency have been presented.

• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.689-692
• /
• 2003

In this paper, we propose an adaptive beamforming algorithm for array antenna. The proposed beamforming algorithm, based on Block LMS (Block - Least Mean Squares) algorithm, has a variable step size from coefficient update. This method shows some advantages that the convergence speed is fast and the calculation time can reduced using a block LMS algorithm from frequency domain. As the adaptive parameter approaches a stationary state, it could reduce the number of filter coefficient update with the help of various step size. In this paper we compared the efficiency of the proposed algorithm with a standard LMS algorithm which is a representative method of adaptive beamforming.

• Proceedings of the KIEE Conference
• /
• 2004.05a
• /
• pp.56-58
• /
• 2004

In this paper, we propose an adaptive beamforming algorithm for array antenna. The proposed beamforming algorithm is based on EDS (Euclidean Direction Search) algorithm. Generally LMS algorithm has a much slower rate of convergence, but its low computational complexity and robustness make it a representative method of adaptive beamforming. Although the RLS algorithm is known for its fast convergence to the optimal Wiener solution, it still suffers from high computational complexity and poor performance. The proposed EDS algorithm has a rapid convergence better than LMS algorithm, and has a computational more simple complexity than RLS algorithm. In this paper we compared the efficiency of the EDS algorithm with a standard LMS algorithm.