• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 C
• /
• pp.1535-1537
• /
• 2003

Manganese oxide electrode was designed to improve electrical conductivity for dimensionally stable anode(DSA) using discreet variation (DV)-X${\alpha}$ method. It was calculated in DV-X${\alpha}$ method that the addition of nickel to manganese oxide reduce the energy band gap of manganese oxide electrode. Therefore, it is estimated that nickel in 3 additive elements of Ti, Ni and Sn is the best candidate to improve the electrical conductivity of manganese oxide. The anodically deposited manganese oxide which was produced in 0.2M $MnSO_4$ and 0.2M (Mn,Ni)$SO_4$ solution had $MnSO_4$ structure which was identified by XRD. The $MnSO_4$ films produced in both solutions over than 50mA/$cm^2$ of current density and long deposition time of 600sec showed low adhesion with Ti substrate.

• 한국표면공학회지
• /
• 제29권2호
• /
• pp.140-145
• /
• 1996

Silver deposits formed on copper substrates by replacement reactions show poor adhesion, and a silver film plated on such a deposit does not adhere. Silver ion makes a highly stable complex with cyanide ion, so that in a silver cyanide solution, the activity of silver ion is very small. This is one of the reasons for the universal use of cyanide baths in the industrial silver plating. However, the consideration of the difference between the values of the stability constants for bath the silver-iodide complex and the copper-iodide complex suggest that the rate of replacement deposition of silver on the copper substrate in si]ver-potassium iodide solution, could be comparatively low. To confirm this, the rate of replacement deposition of silver in both a silver-potassium iodide solution ($AgNO_3$0.10 mol/L, KI 2.00 mol/L ) and a strike silver plating bath (AgCN 0.028 mol/L, KCN 1.15 mol/L ) was estimated from the current density corresponding to the point of intersection of the anodic and the cathodic polarization curves. These estimated values were almost the same, and it is suggested that the silver-potassium iodide solution is not only a cyanide free silver plating bath capable of employing a copper substrate but a silver plating bath which requires no strike plating.

• 한국표면공학회지
• /
• 제39권1호
• /
• pp.13-17
• /
• 2006

The effects of an organic additive, naphthalene trisulfonic acid (NTSA), contained in the nickel sulfamate bath on the surface properties of the electrodeposited nickel layer were investigated through electrochemical technique, x-ray diffraction analysis, and microscopic observation. The addition of NTSA facilitated the oxidation process of electrodeposited nickel layer during anodic scan and also increased the hardness and internal stress of the nickel film as the applied current density became higher. It seems that NTSA modulated the deposit structure during electrodeposition and so induced higher distribution of (110) orientation with respect to (200). With the increase of the NTSA in the bath, nickel layer was formed in small grain size, which resulted in enhanced surface evenness and brightness.

• 한국표면공학회지
• /
• 제31권5호
• /
• pp.251-260
• /
• 1998

Stainless Steel is being used widely for various purposes due to its good corrosion resistance. There have been many researches to produce colored stainless steel by several methods such as anodizing and ion-plating. In this experiment, we $Ti_XN$(C,O) on the films SUS304, aluminium, and glass substrates with DC magentron sputterinng system made by Leybold Hereus, and strdied the structur, corrsion and pit characture of the TiXN observed by TeM image was black and whink and white columnar hed a very fine(200$\AA$) dense sturcture,and the diffraction resistance at the $3{\times}10_6A/\textrm{cm}^2$ and $10_{10}\times{cm}^2$current density were obtained in the under-stoichiometry $Ti_xN$ compound of Ar/$N_2$(Ar:$N_2$=100:6, titanium-rich compound) and the over-stoichiometry compound of Ar/$N_2$((Ar:$N_2$=60:15) respectively. When the thiness was over 1.64$\mu\textrm{m}$, good pit resistance could be obtained and its improvement was especially affected by perfect surfaceface. Typical TiN anodic polarzation curves of very unstable corrosion were observed by $Ti_xN$ film on the glass and perfect film of 3.28$\mu\textrm{m}$ thickness.

• 대한금속재료학회지
• /
• 제50권4호
• /
• pp.280-284
• /
• 2012

In this study, we prepared a sample of AISI 409L weld metals using automotive exhaust manifolds and evaluated their corrosion properties by conducting an anodic polarization test after 10 minute of heat treatment at $900^{\circ}C$. The specimens of AISI 409L transformed fully ferrite. Weld metal was refined more than base metal. Specimen of heat treatment at $900^{\circ}C$ and as weld specimen was formed precipitation. However heat treatment specimen was bulkly formed and coarser than the as weld specimen. The strength measured by 10 Hv highly at heat treatment specimens in comparison with as weld. The increase in strength is attributed to the precipitation of Ti. The result of heat treatment suggest that there was a decrease of current density and high corrosion potential. Following heat treatment process produced Ti precipitation and for this reason, it can restrain Cr-carbide so that steel will have more corrosion resistance.

• Corrosion Science and Technology
• /
• 제22권6호
• /
• pp.478-483
• /
• 2023

This study examined the corrosion behavior of bimetal materials composed of Fe-Ni alloy and Fe-Ni-Mo alloy, both suitable for use in electromagnetic switches. Electrochemical polarization and weight loss measurements revealed that, in contrast to Fe-Ni alloy, which exhibited pseudo-passivity behavior, Fe-Ni-Mo alloy had higher anodic current density, displaying only active dissolution and greater weight loss. This indicated a lower corrosion resistance in the Fe-Ni-Mo alloy. Equilibrium calculations for the phase fraction of precipitates suggested that the addition of 1 wt% Mo may lead to the formation of second-phase precipitates, such as Laves and M₆C, in the γ matrix. These precipitates might degrade the homogeneity of the passive film formed on the surface, leading to localized attacks during the corrosion process. Therefore, considering the differences in corrosion kinetics between these bimetal materials, the early degradation caused by galvanic corrosion should be prevented by designing a new alloy, optimizing heat treatment, or implementing periodic in-service maintenance.

• Nuclear Engineering and Technology
• /
• 제56권8호
• /
• pp.3385-3396
• /
• 2024

Copper canisters are commonly employed to contain HLW for the long-term, making it crucial to understand how corrosion affects the canister. This study conducted a comparative analysis of two widely used calculation methods for modeling canister corrosion within a 3-D DGR domain. The first method, termed transport-limited corrosion, assumes an immediate sulfide-copper reaction and has been traditionally used due to its conservative nature. The second method, known as the potential-limited corrosion, considers coupled redox reactions at the canister surface and computes corrosion rates through anodic current density. From the results, we found that the edge of the canister geometry and the omission of electrochemical kinetics impose critical limitations with the transport-limited corrosion method. These limitations include the singularity problem, excessive sensitivity to the curvature of the canister's edge, and an inability to evaluate the distribution of corrosion rate over the canister surface as a function of the sulfide concentration. On the other hand, the potential-limited corrosion method avoided the limitations found in the other method. Since the factors relating to these limitations are critical to the design and optimization of the copper disposal canister, careful consideration when selecting appropriate calculation methods for corrosion will be required.

• 공업화학
• /
• 제9권7호
• /
• pp.998-1003
• /
• 1998

$85^{\circ}C$, 0.4 M $Ba(OH)_2$용액내에서 펄스전류파형을 이용하여 Ti전극위에 $BaTiO_3$박막을 전해 합성하였다. 환원전류 밀도 및 환원시간이 증가함에 따라 $BaTiO_3$의 결정성 및 페러데이 효율이 증가하였으며, 이는 표면 및 전기화학적특성 분석에 의하면 환원 전류 인가시에 $H_2O$의 환원에 의하여 전극표면의 pH가 증가함으로서 산화전류에 의하여 형성된 산화막의 구조변화가 빠르게 진행되기 때문으로 추측된다. 그리고 0.1M $H_2SO_4$용액하에서 산화막을 형성시킨 후 $BaTiO_3$형성에 미치는 영향을 분석한 결과, 산화막 두께가 증가함에 따라서 산화막을 통한 $Ti^{+4}$이온의 이동이 어려워지면서 $BaTiO_3$형성이 억제되며, 일정두께이상에서는 산화막 결함부위에서 결정이 형성됨을 알 수 있었다.

• 공업화학
• /
• 제8권2호
• /
• pp.161-171
• /
• 1997

인쇄회로기판의 식각폐수를 전기화학적 방법을 이용하여 양극에서 이를 재생하고, 음극에서 구리를 석출하기 위한 실험을 행하였다. 양극에서의 Cu(I)의 산화에 따른 Cu(I)/Cu(II) 변화는 Pt와 Ag/AgCl/4M KCl 전극사이의 전위차를 이용하여 측정하였으며, 반응의 진행에 따른 양극에서의 염소기체 발생은 용액내에 Cu(I)의 농도를 일정치 이상으로 유지시키고, 비다공성 흑연전극을 이용하여 억제할 수 있었다. 그리고, 음극에서의 구리석출은 전류밀도 $360mA/cm^2$, 구리이온농도 12g/l 일때 가장 효율적이며 석출된 구리는 dendrite구조임을 알 수 있었다. 또한 석출효율과 회수방법을 고려할 때 음극으로서 Ti전극을 사용할 경우 가장 우수한 효율을 얻을 수 있었다. 전해온도가 증가함에 따라서 전류효율은 낮아졌으며, 전력효율은 $50^{\circ}C$에서 최대값을 나타내었다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2011년도 추계학술발표대회
• /
• pp.25.2-25.2
• /
• 2011

Recently, thin film capacitors used for vehicle inverters are small size, high capacitance, fast response, and large capacitance. But its applications were made up of liquid as electrolyte, so its capacitors are limited to low operating temperature range and the polarity. This research proposes using Ni-P alloys by electroless plating as the electrode instead of liquid electrode. Our substrate has a high aspect ratio and complicated shape because of anodic aluminum oxide (AAO). We used AAO because film thickness and effective surface area are depended on for high capacitance. As the metal electrode instead of electrolyte is injected into AAO, the film capacitor has advantages high voltage, wide operating temperature, and excellent frequency property. However, thin film capacitor made by electroless-plated Ni on AAO for full-filling into etched tunnel was limited from optimizing the deposition process so as to prevent open-through pore structures at the electroless plating owing to complicated morphological structure. In this paper, the electroless plating parameters are controlled by temperature in electroless Ni plating for reducing reaction rate. The Electrical properties with I-V and capacitance density were measured. By using nickel electrode, the capacitance density for the etched and Ni electroless plated films was 100 nFcm-2 while that for a film without any etch tunnel was 12.5 nFcm-2. Breakdown voltage and leakage current are improved, as the properties of metal deposition by electroless plating. The synthesized final nanostructures were characterized by scanning electron microscopy (SEM).