• 한국해양학회지
• /
• v.21 no.4
• /
• pp.193-202
• /
• 1986

Spatio-temporal variabilities of seawater temperature at 0 and 30m in the southeastern Hwanghae were studied by variance and empirical orthogonal function(EOF) analysis of long records of temperature between 1967 and 1982. The spatial distribution of monthly mean sea surface temperature has a pattern similar to the long-term annual mean which decreases from south to north. On the contrary, the total variance computed from the annual mean of sea surface temperature(SST) increases from south to north. The variance of SST is found to be two times greater than that at 30m in the study area except coastal area south of Kyunggi Bay. The important variance of temperature seem s to be closely associated with the seasonal change of temperature because the first and second modes of EOF having a seasonal cycle explain 97.6% and 85.2% of variances at 0 and 30m, respectively. There is a large difference in temperature between the northern and southern parts of the study area during winter, while the difference becomes very small during summer. This might reflect that in summer the heat gain of sea surface from the incoming radiation is much more important than the heat loss or the oceanic heat advection. In summer coastal waters south of the Kyunggi Bay and around Mokpo are observed to be colder than offshore waters due to tidal mixing.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.12 no.1
• /
• pp.37-43
• /
• 2014

A parametric sensitivity to the annual exposure dose rate to the farming exposure group has been deterministically carried out for three principal elements identified in the near-field of the pyroprocessed waste repository system as a series study of Part 1 of the coupled paper with the same title. Credit time for both metal and ceramic containers, annual nuclide release rete and the degree of loss of bentonite buffer around the container are selected and investigated deterministically for important nuclides. To this end the A-KRS has been assessed and then compared among each other with the normal, the worst, and the best case scenarios associated with their extreme values these elements could have. All the elements are shown to be sensitive to the results as was in Part 1. Methodology studied through this study and the results are expected to make a good feedback to the repository design.

• Journal of the Korean Solar Energy Society
• /
• v.33 no.6
• /
• pp.47-53
• /
• 2013

In order to reduce the energy consumption of the building, much effort is being made. The problems are that excessive solar radiation in summer and the heat loss in winter by the increase of window area. To prevent this problems, government limited the window area ratio or the performance of windows in new buildings. In order to reduce energy consumption of the existing buildings, the window film insulation is spotlight because the window film insulation was simple to installation. This study confirmed the performance of the window film insulation and affect to heating & cooling load of buildings. The impact of the window film insulation coating was confirmed by experiment. And this study confirmed the annual heating & cooling load by simulation. As a results, the surface temperature of coated window was higher than the surface temperature of existing window. The window film insulation was increased surface temperature of window. And this study confirmed that the increased surface temperature was slightly affected the room air temperature through experiment of the insulation box. The results of the heating and cooling load by simulation, this study confirmed that the case of coated window film insulation decreased cooling load in summer and increased heating load in winter. Also the annual total heating & cooling load was increased a little in the case of coated the window film insulation.

• Nutrition Research and Practice
• /
• v.15 no.4
• /
• pp.528-540
• /
• 2021

BACKGROUND/OBJECTIVES: In a healthy person, from 35 years of age, there is an annual loss of muscle mass at the rate of 1-2% and is associated with a decline in the quality of life. This study aimed to identify the particular dietary patterns associated with the risk of lower lean muscle mass in Korean postmenopausal women. SUBJECTS/METHODS: The Korea National Health and Nutrition Examination Survey (KNHANES) is a population-based, continuous cross-sectional annual survey. The participants of the KNHANES IV (2008-2009) and V (2010-2011) were considered for this study. The study sample consisted of 1548 postmenopausal women, aged 45-86 years. Lower lean muscle mass was defined as having appendicular skeletal muscle mass corrected for body weight less than 1 standard deviation of the young reference group aged 20 to 39 years in KNHANES IV and V. To identify the dietary pattern using factor analysis, 24-h recall data was used. RESULTS: The prevalence of lower lean muscle mass was 31.3% in this study population. Four dietary patterns were identified by factor analysis; 'Diverse', 'Western', 'Traditional', and 'Snacks and beverages'. The 'Western' pattern, highest factor loadings for flour and bread, potatoes, red meat, processed meat, eggs, and cheese, was significantly associated with a high (60%) risk of lower lean muscle mass (odds ratio [95% confidence interval] = 1.60 [1.07-2.39], P for trend = 0.01) after adjustments for potential covariates. The other 3 dietary patterns were not associated with lower lean muscle mass. CONCLUSIONS: The study findings suggest that the 'Western' dietary pattern that includes flour and bread, potatoes, red meat, processed meat, eggs, and cheese, may be associated with a higher risk of lower lean muscle mass in Korean postmenopausal women.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.63 no.2
• /
• pp.85-96
• /
• 2021

Irrigation return flow is defined as the excess of irrigation water that is not evapotranspirated by direct surface drainage, and which returns to an aquifer. It is important to quantitatively estimate the irrigation return flow of the water cycle in an agricultural watershed. However, the previous studies on irrigation return flow rates are limitations in quantifying the return flow rate by region. Therefore, simulating irrigation return flow by accounting for various water loss rates derived from agricultural practices is necessary while the hydrologic and hydraulic modeling of cultivated canal-irrigated watersheds. In this study, the irrigation return flow rate of agricultural water, especially for the entire agricultural watershed, was estimated using the SWMM (Storm Water Management Model) module from 2010 to 2019 for the Madun reservoir located in Anseong, Gyeonggi-do. The results of SWMM simulation and water balance analysis estimated irrigation return flow rate. The estimated average annual irrigation return flow ratio during the period from 2010 to 2019 was approximately 55.3% of the annual irrigation amounts of which 35.9% was rapid return flow and 19.4% was delayed return flow. Based on these results, the hydrologic and hydraulic modeling approach can provide a valuable approach for estimating the irrigation return flow under different hydrological and water management conditions.

• Structural Engineering and Mechanics
• /
• v.85 no.2
• /
• pp.197-206
• /
• 2023

The deterioration caused by chloride penetration and carbonation plays a significant role in a concrete structure in a marine environment. The chloride corrosion in some marine concrete structures is invisible but can be dangerous in a sudden collapse. Therefore, as a novelty, this research investigates the ability of a non-destructive damage detection method named the Power Spectral Density (PSD) to diagnose damages caused only by chloride ions in concrete structures. Furthermore, the accuracy of this method in estimating the amount of annual damage caused by chloride in various parts and positions exposed to seawater was investigated. For this purpose, the RC Arosa bridge in Spain, which connects the island to the mainland via seawater, was numerically modeled and analyzed. As the first step, each element's bridge position was calculated, along with the chloride corrosion percentage in the reinforcements. The next step predicted the existence, location, and timing of damage to the entire concrete part of the bridge based on the amount of rebar corrosion each year. The PSD method was used to monitor the annual loss of reinforcement cross-section area, changes in dynamic characteristics such as stiffness and mass, and each year of the bridge structure's life using sensitivity equations and the linear least squares algorithm. This study showed that using different approaches to the PSD method based on rebar chloride corrosion and assuming 10% errors in software analysis can help predict the location and almost exact amount of damage zones over time.

• Korean Journal of Soil Science and Fertilizer
• /
• v.45 no.6
• /
• pp.890-896
• /
• 2012

This study was conducted to evaluate soil erosion risk with a standard unit watershed in the upper Upper Nakdong River Basin according to soil characteristics and landuse using the spatial soil erosion map. The study area is $3,605.6km^2$, which consists of 2 subbasins, 35 standard unit watersheds (Andong basin 18, Imha basin 17). As a evaluation of soil erosion potential using the spatial soil erosion map, total annual soil loss and soil loss per area estimated $2,013{\times}10^3Mg\;yr^{-1}$ (Andong basin 979, Imha basin 1,034) and $6.1Mg\;ha^{-1}yr^{-1}$ (Andong basin 6.0, Imha basin 5.2), respectively. 54.2% of soil loss was originated from Arable land (Andong basin 49.0%, Imha basin 59.0%), and the area of regions, graded as higher "Moderate" for annual soil loss, was $201.7km^2$ (Andong basin 84.9, Imha basin 116.8). Average soil loss per area of unit watersheds by classification according to soil dominant parent material types ranked "Sedimentary rock group" > "Mixed group" > "Metamorphic rock group" > "Igneous rock group". In conclusion, the results of this study inform that the classification of soil parent material type would be effective for soil erosion analysis and interpretation in the Upper Nakdong River Basin.

• Korean Journal of Community Nutrition
• /
• v.10 no.6
• /
• pp.905-919
• /
• 2005

This study raised the necessity of developing performance indicators for measuring the management efficiency and effectiveness of school food service, and as a means of helping its implementation, a balanced score card (BSC) approach developed by Norton and Kaplan was adopted. This study established BSC in seven phases through literature: Phase 1 Defining a school food service and the scope of working activities, Phase 2 Establishing the vision of a school food service, Phase 3 Setting strategic goals, Phase 4 Identifying critical success factors (CSFs), Phase 5 Developing Key Performance Indicators (KPIs), Phase 6 Extracting cause and effect relationship, and Phase 7 Completing a preliminary BSC. The preliminary BSC was fumed into a survey, which was administered to food service related people working at the Office of Education and School Food Service including 16 offices,209 dietitians, 48 school administrators both from self-operated and contract-managed, and 9 experts in areas related to school food service. They were asked questions about strategies from 4 different perspectives,12 CSFs, 39 KPls, and the cause and effect relationships among them. As a result, among the CSFs based on 4 different perspectives, all factors other than ' zero sum on profit/loss ' from the financial perspective turned out to be valid. In terms of KPIs, manufacturing cost percentages, casualty loss count/reduction rates, school foodervice participation rates, and sales goal achievement rates were found to be valid from the financial perspective, while student satisfaction index, faculty satisfaction index, leftover ratio, nutrition educational performance count, index of evaluating nutrition education, customer claim count/reduction rate, handling customer claim count/reduction rate, and parent satisfaction index were found to be valid from the customers' perspective. Besides, nutritional requirement sufficient ratio, nutritional management score, food poisoning outbreak count, employee safety accident count, sanitary inspection assessment index, meals per labor hour (productivity index), computerization ratio, operational management index, and purchase management assessment index were also found to be valid from the perspective of internal business processes. From the perspective of innovation and learning, employee turnover ratio/rate of absenteeism, annual education and training count, employee satisfaction index, human resource management assessment index, annual menu-related customer feedback, food service information index for employees and parents/schools were also found to be valid. The significance of this study is to present indices for measuring overall performance of school lunch food service operations without putting any limitation on types of school food service management, and to help correctly assess the contribution of the current types of school food service management to schools and students. (Korean J Community Nutrition 10(6) : $905\∼919$, 2005)

• Journal of Korea Water Resources Association
• /
• v.41 no.2
• /
• pp.149-162
• /
• 2008

The Soil and Water Assessment Tool (SWAT) developed by the USDA-Agricultural Research Service for the prediction of land management impact on water, sediment, and agricultural chemical yields in a large-scale basin was applied to Daecheong Reservoir basin to estimate the amount of soil losses from different land uses. The research outcomes provide important indications for reservoir managers and policy makers to search alternative watershed management practices for the mitigation of reservoir turbidity flow problems. After calibrations of key model parameters, SWAT showed fairly good performance by adequately simulating observed annual runoff components and replicating the monthly flow regimes in the basin. The specific soil losses from agricultural farm field, forest, urban area, and paddy field were 33.1, $2.3{\sim}5.4$ depending on the tree types, 1.0, and 0.1 tons/ha/yr, respectively in 2004. It was noticed that about 55.3% of the total annual soil loss is caused by agricultural activities although agricultural land occupies only 10% in the basin. Although the soil erosion assessment approach adopted in this study has some extent of uncertainties due to the lack of detailed information on crop types and management activities, the results at least imply that soil erosion control practices for the vulnerable agricultural farm lands can be one of the most effective alternatives to reduce the impact of turbidity flow in the river basin system.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.35 no.11
• /
• pp.25-34
• /
• 2019

It is important to design windows in a reasonable way considering the performance characteristics of the elements of the window rather than just to increase the thermal energy performance of the window. In this study, the Heat-transfer Coefficient as insulation performance of the windows and together with the grade of the glass's SHGC (Solar Heat Gain Coefficient) were analyzed to relate to the energy efficiency performance of the building by azimuth angle. Based on this basic study, the Heat-transfer Coefficient of windows and the SHGC rating of glass were applied to the unit plan of apartment building, and the Heating and Cooling Demand were analyzed by azimuth angle. Apartment plan types were divided into 2 types of Non-extension and extension of balcony. The designPH analysis data derived from the variant of the Heat-transfer Coefficient and SHGC, were put into PHPP(Passive House Planning Package) to analyze precisely the energy efficiency(Heating and Cooling Demands) of the building by azimuth angle. In addition, assuming the 'ㅁ' shape layout, energy efficiency performance and potential of PV Panel installation also were analyzed by floors and azimuth angle, reflecting the shading effects by surrounding buildings. As the results of the study, the effect of Heat Gain by SHGC was greater than Heat Loss due to the Heat-transfer Coefficient. So it is more effective to increase SHGC to satisfy the same Heating Demand, and increasing SHGC made possible to design windows with low Heat-transfer Coefficient. It was also revealed that the difference in annual Heating and Cooling Demands between the low, mid and high floor households is significantly high. In addition to it, the installation of PV Panel in the form of a shading canopy over the window reduces the Cooling Load while at the same time producing electricity, and also confirmed that absolute thermal energy efficiency could not be maximized without controlling the thermal bridge and ventilation problems as important heat loss factors.