• 유체기계공업학회:학술대회논문집
• /
• 2000.12a
• /
• pp.99-103
• /
• 2000

This paper describes the development of standard series for turbo blowers. In mass production system, it is very required to standardize blowers to improve the productivity of ordering, estimating, manufacturing. To standardize blowers, we performed researches on the effects of $b_1$(impeller inlet width), $b_2$(impeller outlet width), ${\beta}_1$(blade inlet angle), ${\beta}_2$(blade outlet angle), Z(number of blades) of impellers and geometry of casing experimentally. Through this study, we chose the several best model of turbo blowers with high efficiency and low noise, which represent each specific speed series 63, 80, 100, 125, 160, 200, 250, 315. After the development of such standardized blowers, the test results are used to prepare the fan geometry and performance database for a selection software.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.494-497
• /
• 2003

A rotating device driven by an Inchworm motor was designed and fabricated to be used as an angie standard system. 1. PZT was adopted as a driving source, while the movement of PZT was guided by the leaf spring employing the elastic transformation of metals. 2. The device could rotate in a 360-degree arc. continuously Performance test of the device showed about 0.02 sec. of the minimum revolution angle and 1/15 rpm of the maimum revolution speed. 3. To improve its performance requires further studies on realizing a shifting device with faster response time, on increasing the output current (capacity) of the power amplifier used to drive PZT, on the dynamic motion of clamping. and on determining the optimum clamping condition

• Journal of Ginseng Research
• /
• v.20 no.1
• /
• pp.78-82
• /
• 1996

In order to clarify effect of transplanting angle of seedling on shape and growth of ginseng root, ginseng of seedlings were transplanted with $60^{\circ}$ and $90^{\circ}$ respectively, and the root characters of 2-, 4- and 6-year-old ginseng were investigated. The length of main root with 45$^{\circ}$was above 7 cm (standard) but that of $60^{\circ}$ and $60^{\circ}$ was below 7 cm (standard). Number of good lateral root was above 2.3 ea for $45^{\circ}$, 0~$30^{\circ}$, but below 2.3 ea per plant for 60~$90^{\circ}$ respectively. Root fresh weight with $0^{\circ}$, $30^{\circ}$, $45^{\circ}$ was heavier than that with $60^{\circ}$ and $90^{\circ}$. Root disease infection rate was highest with $0^{\circ}$. There were, no significant difference in stem length, stem diameter, leaf area, comber of palmate leaves and leaflets per plant, ratio of missing plant, root diameter in 2-, 4- and 6-year-old ginseng.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.22 no.1
• /
• pp.24-28
• /
• 1986

The maneuverabilities of the M. S. PUSAN 402 are studied, based on maneuvering indices and the data obtained from her Z test. The results obtained are summarized as follows: 1. The maneuvering indices K' and T' of the M. S. PUSAN 402 are 1. 490, 1.030 at 10$^{\circ}$ Z test and 2.644, 1.153 at 20$^{\circ}$ Z test and 3.382. 1. 027 at 30$^{\circ}$ Z test respectively. The above calculated values K', T' showed that her maneuverabilities are more increased when the rudder is used to large angle than to smaIl angle. 2. As her maneuvering indices K' and T' at 10$^{\circ}$ Z test are higher than the standard maneuvering indices of fishing boats, her turning ability was found to be higher but her obeying ability lower. 3. When the M. S. PUSAN 402 took a turn at her 10$^{\circ}$ test, running distance was about 8.4 times her own length and didn't exceed the standard maneuvering distance, 5 to 11 times ship's own length, therefore she was considered to have good maneuverabilities syntheticaIly.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2002.10a
• /
• pp.435-442
• /
• 2002

Fluid Confirmation Tests(FCT) on 1500 ground Anchors install in weathered rock were carried out to investigate upper and lower limit of elastic elongation, frictional resistant of fixed anchor body, mobilized angle between anchor body and soil. All the measured data were analysed and compared with theoretical equations. The frictional angles of diaphragm wall and anchorage system in weathered rock showed nonlinear curve between upper and lower limit of standard elongation. The FCT results indicated that the frictional resistant angles increased with higher values of surcharge load. The quality assurance on the fixed anchor location was investigated by means of measuring elastic elongation during the FCT, and comparing these with theoretical design length, the quality of anchors in this particular site found to be above average standard. The results of this research works with provide valuable guide line on quality assurance of anchors system as well as resonable prediction of friction resistance between the fixed anchor body and the weathered rock.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.33 no.8
• /
• pp.635-642
• /
• 2009

The three-dimensional turbulent wingtip vortex flows have been examined in the present study by using the commercial code FLUENT. The standard ${\kappa}-{\varepsilon}$ model is used as a closure relationship. The wing is constructed by using an elliptic body whose aspect ratio is 3.8 and the NACA 16-020 airfoil section. The simulations for various angle attack (${\alpha}=0^{\circ}$, $5^{\circ}$, and $10^{\circ}$) are carried out. The effect of Reynolds number is also investigated in this study. As the angle attack increases, the wingtip vortex becomes stronger. However, the relative vortex strength to inlet velocity decreases as Reynolds number increases.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.05a
• /
• pp.419-421
• /
• 2008

Sputter deposition on a Pt counter electrode was studied using RF plasma as the improvement of conversion efficiency for dye-sensitized solar cells (DSC). The effects of the sputtering thickness and incident angle on a Pt counter electrode for DSC was scrutinized. We conducted the experiment to get the optimal sputtering time for the performance of the DSC. Under the sputtering time condition of 120 seconds, we varied the incident angles of substrate from $0^{\circ}$ to $60^{\circ}$. Under standard test condition (AM 1.5, 100mW/$cm^2$), we obtained the maximum efficiency of 4.61% at the incident angle of $40^{\circ}$ with an active cell area of $1cm^2$.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.19 no.4
• /
• pp.333-342
• /
• 1997

The purpose of this study was to establish a set of standard values for the form of the nose and its relationship to other craniofacial structures in young korean adults in angle's class I occlusion. The subjects were 40 (20 male, 20 female) Korean dental students in angle's class I occlusion. Lateral cephalometric radiographs were used to determine the form of the nose and its positon relative to other craniofacial structures. The results were obtained as followed. 1. There was a significance between the registered male and female measurements in nasal height(P<0.05). (Male: 58.23mm Female : 54.62mm) 2. There was a significance between the registered male and female measurements in nasal length(P<0.05). (Male : 54.18mm Female : 49.38mm) 3. The vertical distances from the tip of the nose in Korean adults were significantly greater in the male(P<0.05) and were smaller in both sex in comparison with caucasian.

• Journal of Power System Engineering
• /
• v.12 no.6
• /
• pp.24-28
• /
• 2008

It expects demand of ships which equipped with JIB crane growth to continue. However, demand of JIB crane is increased, domestic shipment company imitated the design of Europe and Japan. And we need to develop the functional system of the JIB crane and modernize it. We need to find the optimum luffing angle for saving energy when JIB crane works. This study analyzed buckling load of JIB and reaction force of support point and stress of JIB according to the luffing angle through finite element analysis when JIB crane loads 40 ton weight. And this study considered the safety factor 1.8 of material. Every design condition was KS A1627 standard. This study used ANSYS 10.0.

• Journal of the Korean Solar Energy Society
• /
• v.29 no.2
• /
• pp.47-54
• /
• 2009

The amount of incident rays over inclination according to direction has been widely utilized as important data m installing solar thermal systems. To optimize the incident solar radiation, the slope, that is the angle between the plane surface in question and the horizontal, and the solar azimuth angles are needed for these solar thermal systems. This is because the performance of the solar thermal systems in much affected by angle and direction of incident rays. Recognizing that factors mentioned above are of importance, actual experiment on the moving route of the sun have been performed in this research to obtain the angle of inclination with which the maximum incident rays can be absorbed. After all, the standard for designing highly optimized solar thermal systems will be provided for designers and employees working in the solar collector related industries.