• Geophysics and Geophysical Exploration
• /
• v.9 no.1
• /
• pp.30-36
• /
• 2006

Japan's first pilot-scale $CO_2$ sequestration experiment has been conducted in Nagaoka, where 10400 t of $CO_2$ have been injected in an onshore aquifer at a depth of about 1100 m. Among various measurements conducted at the site for monitoring the injected $CO_2$, we conducted time-lapse crosswell seismic tomography between two observation wells to determine the distribution of $CO_2$ in the aquifer by the change of P-wave velocities. This paper reports the results of the crosswell seismic tomography conducted at the site. The crosswell seismic tomography measurements were carried out three times; once before the injection as a baseline survey, and twice during the injection as monitoring surveys. The velocity tomograms resulting from the monitoring surveys were compared to the baseline survey tomogram, and velocity difference tomograms were generated. The velocity difference tomograms showed that velocity had decreased in a part of the aquifer around the injection well, where the injected $CO_2$ was supposed to be distributed. We also found that the area in which velocity had decreased was expanding in the formation up-dip direction, as increasing amounts of $CO_2$ were injected. The maximum velocity reductions observed were 3.0% after 3200 t of $CO_2$ had been injected, and 3.5% after injection of 6200 t of $CO_2$. Although seismic tomography could map the area of velocity decrease due to $CO_2$ injection, we observed some contradictions with the results of time-lapse sonic logging, and with the geological condition of the cap rock. To investigate these contradictions, we conducted numerical experiments simulating the test site. As a result, we found that part of the velocity distribution displayed in the tomograms was affected by artefacts or ghosts caused by the source-receiver geometry for the crosswell tomography in this particular site. The maximum velocity decrease obtained by tomography (3.5%) was much smaller than that observed by sonic logging (more than 20%). The numerical experiment results showed that only 5.5% velocity reduction might be observed, although the model was given a 20% velocity reduction zone. Judging from this result, the actual velocity reduction can be more than 3.5%, the value we obtained from the field data reconstruction. Further studies are needed to obtain more accurate velocity values that are comparable to those obtained by sonic logging.

• Journal of the Korea Concrete Institute
• /
• v.21 no.1
• /
• pp.93-103
• /
• 2009

The concept of the effective moment of inertia has been generally used for the deflection estimation of reinforced concrete flexural members. The KCI design code adopted Branson's equation for simple calculation of deflection, in which a representative value of the effective moment of inertia is used for the whole length of a member. However, the code equation for the effective moment of inertia was formulated based on the results of beam tests subjected to uniformly distributed loads, which may not effectively account for those of members under different loading conditions. Therefore, this study aimed to verify the influences of moment shapes resulting from different loading patterns by experiments. Six beams were fabricated and tested in this study, where primary variables were concrete compressive strengths and loading distances from supports, and test results were compared to the code equation and other existing approaches. A method utilizing variational analysis for the deflection estimation has been also proposed, which accounts for the influences of moment shapes to the effective moment of inertia. The test results indicated that the effective moment of inertia was somewhat influenced by the moment shape, and that this influence of moment shape to the effective moment of inertia was not captured by the code equation. Compared to the code equation, the proposed method had smaller variation in the ratios of the test results to the estimated values of beam deflections. Therefore, the proposed method is considered to be a good approach to take into account the influence of moment shape for the estimation of beam deflection, however, the differences between test results and estimated deflections show that more researches are still required to improve its accuracy by modifying the shape function of deflection.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.61 no.3
• /
• pp.145-152
• /
• 2016

The objective of this study was to evaluate the mechanical quality of cultivars that could potentially be used to processed cooked rice. Proximate composition, amylose content, cooking quality, and the Toyo value, were higher in Jungsaenggold than in the other cultivars. The results showed that the crude protein contents of the rice cultivars were between 4.60 and 6.59%. The amylose content was the highest in the Haedam cultivar (21.36%), but was the lowest in the Jungsaenggold cultivar (17.11%). Cooking quality was the highest in the Haiami and Jungsaenggold cultivar. Texture analyzer test showed that Ilpum had the lowest hardness and highest stickiness. Significant differences in the palatability characteristics (Toyo results for glossiness quality) of the rice flour were recorded using a Toyo Meter Analyzer. Ilpum, Samkwang, Haiami and Jungsaenggold had low amylose contents and the highest Toyo values. Thus, the results of this study suggested that Jungsaenggold can be effectively used to produce processed cooked rice.

• Food Science of Animal Resources
• /
• v.26 no.4
• /
• pp.525-531
• /
• 2006

Effects of Chlorella powder on the growth of lactic acid bacteria, ripening velocity and organoleptic properties in Appenzeller cheese were investigated. Added levels of Chlorella powder were 0, 0.5, 1.0 and 2.0%. The lactic acid bacteria count was higher in cheese added with Chlorella than those in the control cheese. The pH of cheese increased gradually after 3 weeks, reaching pH $5.4{\sim}6.2$ at 15 weeks of maturation, and the pH was slightly lower in Chlorella added cheese than in control cheese. The soluble nitrogen compounds, non casein nitrogen (NCN) and non protein nitrogen (NPN), in Appenzeller cheese increased during 15 weeks of ripening, and they were higher in Chlorella added cheese than in control cheese. Electrophoresis of cheese proteins revealed that caseins were degraded more rapidly in Chlorella cheese as the level of Chlorella increased so that the cheese with 2% Chlorella could have developed a bitter taste and a stench by an excessive degradation of proteins. Sensory scores of the cheese ripened for 15 weeks were diminished as the level of Chlorella increased especially the cheese added with 2% Chlorella obtained significantly lower values of sensory scores than control cheese. Among the Chlorella cheeses, 0.5% Chlorella added cheese showed the highest score in overall sensory preference. From the results, the adequate level of Chlorella powder being added to produce an Appenzeller cheese product with acceptable quality was suggested to be 0.5%.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.21 no.4
• /
• pp.72-81
• /
• 2013

The objective of this study was to verify whether SCB(Slurry Composting & Bio-filtration) system can be applied for the treatment of anaerobic digestion(AD) wastewater and also, to identify the most effective set among three filtration compost beds tested. Results can be summarized as these; (a) When AD wastewater was sprayed on the top of beds which were mainly composed of sawdust and/or other media and, subsequently, filtrates collected and analyzed, there were large drop in the values of Electric Conductivity(EC), Total Suspended Solid(TSS), Biochemical Oxygen Demand(BOD), and Chemical Oxygen Demand(COD). In contrast, Total Nitrgen(T-N) and Total Phosphorus(T-P) were progressively elevated. We consider these changes as positive if the filtrate are to be utilized as liquid fertilizer. (b) When three sets of filtration beds (T1, T2, T3) were compared for their effectiveness, no significant difference was found among them. These indicate that expensive sawdust can be replaced in part with cheaper media such as woodchip, rice husks, or others. (c) At early stage of operation (within 20 days), BOD in filtrates were maintained at high level probably due to the lack of microbial activity. During the same stage, T-N, T-P was at low level but, were elevated to higher levels thereafter. These data, when combined, indicate that the filtration system needs at least a couple of weeks for the optimized microbial functioning. (d) The temperatures of the experimental beds were progressively dropped as the experiment continued through the fall season, although filtration effectiveness was not noticeably influenced.

• Nuclear Medicine and Molecular Imaging
• /
• v.42 no.5
• /
• pp.369-374
• /
• 2008

Purpose: F-18 FDG PET/CT has excellent sensitivity and specificity for staging non-Hodgkin lymphomas, but to the author's knowledge few studies to date have evaluated FDG PET/CT in peripheral T cell lymphoma. We evaluated the usefulness of F-18 FDG PET/CT in staging of patients with peripheral T cell lymphoma, especially indolent cutaneous T cell lymphomas. Materials and Methods: Twenty five patients (M:F=17:8, age $53.7{\pm}14.8$ yrs) with biopsy-proven indolent cutaneous T cell (CL) or noncutaneous T cell lymphomas (NCL) underwent PET/CT scans for staging at baseline. Peak standardized uptake values (p-SUV) of all abnormal foci were measured and compared between cutaneous and noncutaneous lesions. F-18 FDG PET/CT was performed on 6 patients with indolent CL and on 19 patients with NCL. Results: All 6 patients with indolent CL had no significant FDG avidity in the skin despite histologically positive cutaneous lesions. However, FDG avidity appeared in extracutaneous lesions (lymph nodes) in two patients with CL where CT imaging suggested lymphoma involvement (mean p-SUV $4.26{\pm}0.37$ in noncutaneous lesions in CL). In NCL, FDG avidity was demonstrated in all lesions where CT imaging suggested lymphoma involvement (mean p-SUV, $8.52{\pm}5.00$ in noncutaneous lesions in NCL). Conclusion: F-18 FDG PET/CT has the limitation of usefulness for the evaluation of the skin in indolent CL. In contrast, F-18 FDG PET/CT is sensitive in staging evaluation of extracutaneous lesions regardless of CL or NCL.

• Journal of radiological science and technology
• /
• v.34 no.4
• /
• pp.323-331
• /
• 2011

We evaluated clinical usefulness of Arterial spin labeling perfusion MR imaging on the acute ischemic cerebral infarction patients through this study. We compared 22 patients who were done with DSC imaging and ASL imaging in admitted emergency room with acute ischemic cerebral infarction, with 36 normal comparison persons (DSC image on 21persons, ASL images on 15persons). Siemens Magnetom Verio 3.0T with 12 channel head coil was used for this study. DSC image obtained 4 maps(rCBV, rCBF, rMTT, TTP) through post-processing. For qualitative analysis we compared the area of lesion macro-diagonal with the size of diffusion weighted MR image for rMTT, TTP, rCBF, rCBV, ASL maps. For Quantitative analysis we analyzed significant correlations between less than 3 cm infarction group and normal comparison group using mean relative value of flowing image with Mann-Whitney U test. TTP(95.5%) and rCBF(95.5%) maps showed high recognition rate in qualitative analysis for >3cm infarction group. The rCBF and rCBV map tests were highly related with final stage stroke areas. Mean relative value of infarction group showed a significant correlations in quantitative analysis(p<0.05). As a conclusion, arterial spin labeling image showed high lesion recognition rate in the >3cm infarction group. Mean relative values in quantitative evaluation were used for reference data. If we do more sustainable researches, ASL image will be useful for an early diagnosis of cerebral infarction, determination of the range of ischemic pneumbra and effective treatments.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.18 no.1
• /
• pp.63-72
• /
• 2020

Dissolved hexavalent uranium can exist in the form of several different chemical species. Furthermore, species distributions depend on the pH value of the aqueous solution. Representatively, UO₂²⁺, UO₂OH⁺, (UO₂)₂(OH)₂²⁺, and (UO₂)₃(OH)₅⁺ species coexist in solutions at acidic and circumneutral pH values. When amorphous silica particles are suspended in an aqueous solution, the dissolved chemical species are easily adsorbed onto silica surfaces. In this study, it was examined whether the species distribution of the adsorbed U(VI) on a silica surface followed that of the dissolved U(VI) in an aqueous solution. Time-resolved luminescence spectra of three different dissolved species (UO₂²⁺, UO₂OH⁺, and (UO₂)₃(OH)₅⁺) and two different adsorbed species (≡SiO₂UO₂, ≡SiO₂(UO₂)OH^-, or ≡SiO₂(UO₂)₃(OH)^5-) were measured in the pH range 3.5-7.5. The spectral shapes of these chemical species were compared by changing the pH value; consequently, it was confirmed that the species distribution of the adsorbed U(VI) species was different from that of the dissolved U(VI) species.

• Economic and Environmental Geology
• /
• v.48 no.6
• /
• pp.451-465
• /
• 2015

The free-air anomalies are computed using a data set from various types of gravity measurements in the Korean Peninsula area. The gravity values extracted from the Earth Gravitational Model 2008 are used in the surrounding region. The upward continuation technique suggested by Dragomir is used in the computation of the external free-air anomalies at various altitudes. The integration radius 10 times the altitude is used in order to keep the accuracy of results and computational resources. The direct geodesic formula developed by Bowring is employed in integration. At the 1-km altitude, the free-air anomalies vary from -41.315 to 189.327 mgal with the standard deviation of 22.612 mgal. At the 3-km altitude, they vary from -36.478 to 156.209 mgal with the standard deviation of 20.641 mgal. At the 1,000-km altitude, they vary from 3.170 to 5.864 mgal with the standard deviation of 0.670 mgal. The predicted free-air anomalies at 3-km altitude are compared to the published free-air anomalies reduced from the airborne gravity measurements at the same altitude. The rms difference is 3.88 mgal. Considering the reported 2.21-mgal airborne gravity cross-over accuracy, this rms difference is not serious. Possible causes in the difference appear to be external free-air anomaly simulation errors in this work and/or the gravity reduction errors of the other. The external gravity field is predicted by adding the external free-air anomaly to the normal gravity computed using the closed form formula for the gravity above and below the surface of the ellipsoid. The predicted external gravity field in this work is expected to reasonably present the real external gravity field. This work seems to be the first structured research on the external free-air anomaly in the Korean Peninsula area, and the external gravity field can be used to improve the accuracy of the inertial navigation system.

• Korean Journal of Food Science and Technology
• /
• v.3 no.3
• /
• pp.178-184
• /
• 1971

Samples of refined soybean oil were irradiated with lights from a 20-watt incandescent tungsten lamp, a 20-watt fluorescent daylight type lamp, a 20-watt low-pressure mercury vapor germicidal lamp, and direct sunlight for an experimental period of 147 days. Some samples were stored in a dark room throughout the period as a control. The peroxide values of all samples were measured every week. The induction period of the samples was arbitrarily taken as the time required for the samples to reach a peroxide value of 15. The induction period of the control was estimated at 198 days. Those of the samples irradiated with the incandescent light, the fluorescent light, the ultraviolet light, and the sunlight were estimated at 196, 119, 52 and 6 days, respectively. The sunlight showed by far the strongest prooxidant activity whereas the incandescent light showed the weakest but distinct prooxidant activity. The small temperature differences observed among the various samples throughout the experimental period did not seem to affect the oxidation rates of the irradiated samples in any significant way.