• Journal of the Korean Society of Food Science and Nutrition
• /
• v.39 no.11
• /
• pp.1660-1665
• /
• 2010

To obtain data for the standardization of manufacturing method of red ginseng extract pouch products, saponin and physico-chemical properties of 44 Korean red ginseng extract pouch products were analyzed. The concentration of total ginsenoside contents were 5.5~185.7 mg/100 mL. Distribution of the contents of ginsenoside $Rg_3$, $Rg_2$, $Rh_1$, and $Rh_2$ known to have anticancer effect are as follows: $Rg_3$ is 1.6~46.3 mg/100 mL, $Rg_2$ is 0~22.0 mg/100 mL, $Rh_1$ is 0~4.3 mg/100 mL and that of $Rh_2$ is 0~20.4 mg/100 mL, respectively. The anti-diabetic effect of ginsenoside $Rb_2$ and Re distribution of contents were 0~10.8 mg/100 mL and 0~7.0 mg/100 mL, respectively. Among the other saponins, exhibited content to distribution of ginsenoside $Rb_1$ was 0~25.2 mg/100 mL, Rc was 0~12.5 mg/100 mL, Rd was 0~11.3 mg/100 mL, Rf was 0~5.9 mg/100 mL and $Rg_1$ was 0~4.4 mg/100 mL. Results of physicochemical characterization showed total sugar content of 226.6~3,102.9 mg/100 mL, total soluble solids content $1.4\sim9.5^{\circ}Bx$, turbidity 82.2~100.0%, pH in the range of 4.1 to 5.0, respectively. In approximately 50% of collected domestic ginseng extract pouch products (21~24 items), ginsenoside $Rb_1$, $Rb_2$, Rc, Rd, Re and $Rg_1$ were not detected, and saponin content of each product appears to differ greatly. Results indicated that standardization of production methods and standards set for red ginseng extract pouch products in Korea is needed.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.11
• /
• pp.1546-1553
• /
• 2012

In this study, sorghum teas were prepared from Sorghum bicolor L. Moench subjected to different types of milling (no milling (0%), minimum milling (5%), and milling (20%)) and pan-firing times (1 to 10 minutes), and its quality characteristics were investigated. With regards to milling type, total polyphenolic, flavonoid, tannin contents, and antioxidant activities of ethanol extracts from both no milling sorghum and its tea were highest, followed by minimum milling and milling in decreasing order. Crude nitrogen content was highest in milling sorghum and its tea regardless of pan-firing time. With regards to pan-firing time, total polyphenolic, flavonoid, tannin contents, and antioxidant activities of sorghum teas increased with increasing pan-firing time regardless of milling type. The highest DPPH and ABTS radical scavenging activities were observed at a pan-firing time between 7 to 9 minutes. In contrast to ethanol extracts of pan-fried sorghum tea, antioxidant activities, chromaticity, and turbidity of hot water leaching liqueur of sorghum tea were highest in milling sorghum tea, followed by minimum milling and no milling sorghum tea.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.11
• /
• pp.1523-1528
• /
• 2008

This study was carried out to compare the physicochemical characteristics and sensory quality of Sikhye (a Korean traditional rice beverage) prepared with specialty rice varieties. The results showed that Ilpum had higher hulling recovery, milled/brown rice ratio, and milling recovery than Sulgaeng, Baegjinju, Baegjinju 1, and Dongjinchal. The alkali digestive value, protein content, and amylose contents of Sulgaeng were 6.3, 7.3% and 19.3%, respectively. The highest brix degree was $10.00^{\circ}Bx$ in Baegjinju Sikhye. The turbidity appeared at 0.4440, 0.4100, 0.3828, 0.3372, 0.1414 in Ilpum, Baegjinju, Baegjinju 1, Sulgaeng, and Dongjinchal Sikhye, respectively. There were no significant differences in pH and maltose contents among the groups. The highest L-value was 44.62 in Ilpum Sikhye. The a-value and b-value were $-1.66{\sim}-0.70$ and $-9.18{\sim}-5.19$, respectively. Finally, the sensory evaluation results indicated that there were no significant differences in appearance, aroma, and taste between the groups, and the Sulgaeng Sikhye showed higher overall quality than the Dongjinchal Sikhye as the control.

• Food Science and Preservation
• /
• v.24 no.2
• /
• pp.254-265
• /
• 2017

For the production of ${\gamma}-aminobutyric$ acid (GABA) contents increased Seomaeyaksuk fermentant, 0, 0.25, 0.5 and 1.0% of monosodium galutamate (MSG) was added in Seomaeyaksuk water extract 15% contained Sikhye and inoculated with Lactobacillus brevis (KI271266). Physicochemical properties were sampling and analyzed at each 1 day during 3 days fermentation. Goes on fermentation periods, the turbidity was gradually reduced, but lightness and the yellowness was increased, redness was decreased. Soluble solid was also decreased. The reducing sugars content were also decreased during fermentation. pH was 4.65-4.83 before fermentation but it was lower 3.15-3.68 after three days fermentation. The GABA contents increased by fermentation periods and it was the highest in MSG 1.0% added sample (354.38 mg/L). Fructose, glucose and sucrose contents were 50-67% decreased at three days fermentation than before fermentation. Among the organic acids, propionic acid, oxalic acid, citric acid and fumaric acid contents were decreased and lactic acid, acetic acid and succinic acid were increased during fermentation periods. Contents of total polyphenol and DPPH radical scavenging activity were the highest in MSG 0.5% added sample. From these results, we confirmed that increasing of GABA content when the manufacturing of Seomaeyaksuk lactic acid fermentation product, is possibile by addition of MSG without affecting physicochemical characteristics.

• Korean Journal of Food Science and Technology
• /
• v.29 no.3
• /
• pp.476-481
• /
• 1997

For the effect of water-soluble degraded chitosan on the shelf-life of tofu, sterilized distilled water, 0.5% degraded chitosan, 0.5% fumaric acid and 0.5% lactic acid used as an tofu-immersion solutions were investigated by microbial counts, pH, and turbidity during the periods of storage at $4^{\circ}C$. After 2 weeks storage, total aerobic microbial counts in tap water and sterilized distilled water used as an immersion solution were $3.8\;{\times}\;10^8$ and $1.8\;{\times}\;10^8\;CFU/mL$, respectively. In 0.5% fumaric acid and 0.5% lactic acid immersion solutions, the microbial counts were around $10^7\;CFU/mL$ after 2 weeks while the microbial population in 0.5% water-soluble degraded chitosan were, however, $1.6\;{\times}\;10^5\;CFU/mL$ after 2 weeks and $1.7{\times}10^7\;CFU/mL$ after 3 weeks. The lag phase of initial contaminated microbes in 0.5% degraded chitosan solution was longer than those of other treatments. The addition of 0.5% fumaric acid and 0.5% lactic acid decreased the initial pH to pH 5.0, while those of tap water, sterilized distilled water and 0.5% degraded chitosan stabilized the immersion solution at around pH 7.2. All initial pH values were decreased during storage and then slowly increased as storage time was increased. The turbidities in all treatments were increased during storage, but the addition of 0.5% degraded chitosan showed the lowest change, compared to other treatments, showing that the water-soluble degraded chitosan has a good antimicrobial effect and has a potential use to extend the shelf-life of tofu product.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.40 no.7
• /
• pp.1006-1016
• /
• 2011

Saltwort (Salicornia herbacea L.), as a natural additive for regulating Mul-kimchi fermentation, was assessed for physicochemical and sensory characteristics of Yulmoo Mul-kimchi during storage. Saltwort in the form powder was directly added to the Yulmoo Mul-kimchi preparation at 0 (control), 1, 3, 5, and 7% (w/v) per weight of salt to evaluate their physicochemical, sensory, and microbiological characteristics in storage at $10^{\circ}C$ for 30 days. The pH values of all treatments were high, indicating a less acidic environment in all treatments compared to those of the control sample throughout the preservation period. Total acidity increased with storage time as is usually seen with normal kimchi fermentations, whereas the increases were more gradual in the 3 and 5% treatments. The increases in total vitamin C continued until days 6 (control) to 13 (7%), and were different according to the amount of added saltwort and then they decreased after each peak. The fluctuation in reducing sugars fol owed a similar trends of total vitamin C content by showing an initial increase, followed by a decrease based on the saltwort concentration and storage day. The 5% treatment was most effective for suppressing the increase in turbidity among all treatments. The 3 and 5% treatments showed the highest lactic acid bacteria counts during the entire preservation period. In the sensory evaluation results, adding saltwort at more than 3% concentration attained an overall higher scores of acceptability with respect to color, smell, taste, fresh taste, sour taste, crisp, and overall acceptability characteristics. In conclusion, adding saltwort, particularly at concentrations of 3 and 5% extended the preservation period of Yulmoo Mul-kimchi by retarding fermentation effectively.

• Food Engineering Progress
• /
• v.15 no.1
• /
• pp.56-63
• /
• 2011

Durum wheat semolina was added into wet-milled rice flour in order to improve chewy texture, firm bite ("al dente"), and resistance to overcooking of the ordinary rice noodles. Wet noodles were prepared by mixing 0 (control), 5, 10, 15, and 20% (w/w) of semolina per semolina and rice flour mixtures. Vital gluten (4%, w/w) and salt (2%, w/w) were added to form the pliable strands of wet noodles and final moisture contents of the raw mixtures were equalized at 45%. Pasting properties of the suspended flour mixtures as measured by the Rapid Visco Analyser (RVA) showed slight increases (up to $1.2^{\circ}C)$ in pasting temperatures along with the considerable decreases in peak viscosities as semolina increased at over 15%. Reduced shear thinning and retrogradation of the starch solution that leads to hardening of the cooked noodles were indicated by lowered breakdown viscosities and gaps between finaland setback viscosities from the RVA viscogram as semolina increased at over 10%. Reduced water uptake and turbidity increases of the cooking water as caused by the soluble starches from the noodle were also noted as the content of semolina increased. More or less significant (p<0.05) decreases in colorimetric L (lightness) value of the raw- and cooked noodles were observed as semolina increased while a- (redness) and b (yellowness) values were rather increased at the same moment. Textural properties of the cooked noodles such as hardness, springiness, cohesiveness, gumminess, and chewiness from TPA tests were significantly (p<0.05) influenced by added semolina, even at 5%-levels or more. It can be concluded that addition of semolina into rice flour could provide easy handling of the wet noodles without distortion during transportation, integrity and firm bite of the cooked noodles, and less loss of starch to the cooking water in comparison with the ordinary rice noodle. It was finally suggested that optimum level of the semolina in the product was approximately 10% for the quality wet rice noodle products.

• Korean Journal of Environmental Biology
• /
• v.37 no.3
• /
• pp.433-445
• /
• 2019

This study was designed to develop simple tools to easily and efficiently predict the occurrence of algal bloom in agricultural lakes. Physicochemical water quality parameters were examined to reflect the phytoplankton productivity in 182 samples collected from 15 agricultural lakes from April to October 2018. Total phytoplankton abundance was significantly correlated with chlorophyll-a (Chl-a) (r=0.666) and Secchi depth (SD) (r= -0.351). The abundances of cyanobacteria and harmful cyanobacteria were also correlated with Chl-a (r=0.664, r=0.353) and SD (r= -0.340, r= -0.338), respectively, but not with total nitrogen (TN) and total phosphorus (TP). The Chl-a concentration was correlated with SD (r= -0.434), showing a higher similarity than phytoplankton abundance. Therefore, Chl-a and SD were selected as diagnostic factors for algal bloom prediction, instead of analyzing the standing crop of harmful cyanobacteria used in algae alarm systems. Specifically, accurate diagnoses were made using realtime SD measurements. The algal bloom diagnostic tool is an inverse cone-shaped container with an algal bloom diagnosis chart that modified SD and turbidity measurement methods. Lake water was collected to observe the number of rings visible in the container or the number indicated in each ring, depending on the degree of algal bloom,and to determine the final stage of algal blooming by comparison to the colorimetric level on the diagnosis chart. For an accurate diagnosis, we presented 4-step diagnostic criteria based on the concentration of Chl-a and the number of rings and a fan-shaped algal bloom diagnosis chart with Hexa code names. This tool eliminated the variables and errors of previous methods and the results were easily interpreted. This study is expected to facilitate the diagnosis of algal bloom in agricultural lakes and the establishment of an efficient algal bloom management plan.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.12 no.2
• /
• pp.87-94
• /
• 1979

In order to study the water pollution in Suyeong Bay, Busan, some chemical constituents were determined at 25 stations in the neap tides on 9 Aug. 1977 and spring tides on 30 Aug. 1977. Range and mean values of the constituents in the spring tides are as follows: $pH\;6.54\~8.06,\;7.54;$ electrical conductivity $0.413\~0.481\times10^5\;\mu\mho/cm,\;0.467\times10^5\;\mu\mho/cm;\;transparency\;0.2\~5.5m,\;2.2m;$ turbidity $1\~60ppm$, 14ppm, chlorosity $15.20\~18.11g/\ell,\;17.67g/\ell;$ fluoride ion $0.94\~1.03ppm$, 0.99ppm; dissolved oxygen $0.17\~7.60ppm$, 4.77ppm; sulfide $0\~0.46ppm$, 0.07ppm; chemical oxygen demand $1.20\~40.74ppm$, 6.11ppm; ammonia-nitrogen $0.060\~0.520ppm$, 0.180ppm; nitrite-nitrogen $0.001\~0.026ppm$, 0.009ppm; nitrate-nitrogen $0\~0.037ppm$, 0.014ppm; phosphate-phosphorus $0.002\~0.261ppm$, 0.050ppm; n-Hexane soluble $0.5\~5.4ppm$, 2.1ppm ; iron $1.0\~104.11\;ppb$, 24.15ppb ; copper $0\~27.45ppb$, 4.19ppb; lead $0\~2.50ppb$, 0.92ppb; zinc $0\~5.15ppb$, 1.47ppb ; cadmium $0\~0.26ppb$, 0.04ppb; and mercury $0.05\~0.37ppb$, 0.11ppb respectively. The variations of the contents of the chemical constituents in the spring tides were larger than in the neap tides. The contents of COD, sulfide, nutrient salts and heavy metals were the highest in the estuary of Suyeong River, and decreased in order of off Kwangan-Ri region, outer Bay and off Haeun-Dae region. The water quality in Suyeong Bay was particularly shown that the concentrations of COO, iron, copper and mercury were higher than those of other coastal aseas and deficiency in dissolved oxygen was observed in some parte of Suyeong Bay. In consideration of the relationship between the chlorosity and the concentrations of nutrient salts, COD and total heavy metals, water pollution of this area is considered due to the inflow of Suyeong River which was extremely polluted by sewage and industrial wastewaters.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.17 no.2
• /
• pp.45-58
• /
• 2012

For the development of reference values and evaluation of water quality in various environmental conditions, we divided the coastal region around Korean peninsular into 5 distinctive ecological regions based on the influence of surface current, depth, tidal range, turbidity, and climate condition. We used national marine environment monitoring data collected by National Fisheries Research & Development Institute(NFRDI) from 2000-2009. For the reference values, we used maximum seasonal mean from 2000 to 2007 for DIN, DIP, and chlorophyll-a and minimum seasonal mean for secchi depth measured at stations without the influence of river runoff in each ecological regions. For the reference value of bottom dissolved oxygen saturation, we used minimum mean value of 90% calculated from minimal riverine influence stations of whole regions. We calculated enrichment score for each assessment criteria. The enrichment score of DIN, DIP, and Chlorophyll-a was 1 (=< reference value), 2 (< 110% of reference value), 3 (< 125% of reference value), 4 (< 150% of reference value), and 5 (> 150% of reference value). The enrichment score of DO saturation and Secchi depth was 1 (> reference value), 2 (> 90% of reference value), 3 (>75 % of reference value), 4 (> 50% of reference value), and 5 (< 50% of reference value). We calculated water quality index using weighted linear combination of five enrichment score for the comparison of whole regions. From the water quality index distribution calculated from all stations between 2000 and 2007 period, we classified into 5 grade based on the standard deviation calculated from total water quality index. We assigned grade very good(I), good(II), moderate(III), bad(IV), and very bad(V) when the water quality index was less than 23, minimum + 1 sd, +2 sd, +3 sd, and grater than minium+ 3 sd, respectively.