• 한국의상디자인학회지
• /
• 제18권1호
• /
• pp.61-78
• /
• 2016

This study through the literature research to understand the most representative art trend - the definition and evolution of the Cubism in the early 20th century, and through the analysis on the representative painter's works, such as works of Pablo Ruiz Picasso and Georges Braque, This article raises the unique characteristics of the Cubist painting, such as geometry modeling, simultaneity, transparency, collage, deconstruction and reconstruction, etc. On the basis of theoretical research in this study, in order to meet the novelty and originality of clothing design requirements in the field, this research uses the modeling characteristics of the Cubist painting, designs and makes five sets of works in costume designing. Research findings are as follows, 1) According to the geometry modeling, split garment surface into triangle or irregular polygon shaped. 2) Show front and side images of the characters in the same garment surface. 3) Overlapping the images of the characters in the same garment surface. 4) Make use of composite materials to express the characters. 5) Disassemble the characters recombine them in an abstract painting way. These works mainly completed by adopting some techniques like Patchwork and Figurative painting. The colors consist of red, yellow and blue caused "Three primary colors series" to achieve the goal of expanding visual effect. Additionally, for the sake of the formal beauty-deformation distortion, symmetric and asymmetric, for instance the structure of the costume adopts formal beauty technique.

• 한국재료학회지
• /
• 제29권10호
• /
• pp.647-655
• /
• 2019

In order to analyze the effect of hot asymmetric rolling on the microstructure and texture of aluminum alloy and to investigate the effect of the texture on the formability and plastic anisotropy of aluminum alloy, aluminum 6061 alloy is asymmetrically rolled at room temperature, $200^{\circ}C$, $350^{\circ}C$, and $500^{\circ}C$, and the results are compared with symmetrically rolled results. In the case of asymmetric rolling, the equivalent strain (${\varepsilon}_{eq}$) is greatest in the upper roll part where the rotational speed of the roll is high and increases with increasing rolling temperature. The increase rate of the mean misorientation angle with increasing temperature is larger than that during symmetrical rolling, and dynamic recrystallization occurs the most when asymmetrical rolling is performed at $500^{\circ}C$. In the case of hot symmetric rolling, the {001}<110> rotated cube orientation mainly develops, but in the case of hot asymmetric rolling, the {111}<110> orientation develops along with the {001}<100> cube orientation. The hot asymmetric rolling improves the formability (${\bar{r}}$) of the aluminum 6061 alloy to 0.9 and reduces the plastic anisotropy (${\Delta}r$) to near zero due to the {111}<110> shear orientation that develops by asymmetric rolling.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제8권3호
• /
• pp.890-910
• /
• 2014

This paper investigates the spectrum hole utilization of cooperative schemes for the two-way relaying model in order to improve the utilization efficiency of limited spectrum holes in cognitive radio networks with imperfect spectrum sensing. We propose two specific bidirectional secondary data transmission (BSDT) schemes with two-step and three-step two-way relaying models, i.e., two-BSDT and three-BSDT schemes, where the spectrum sensing and the secondary data transmission are jointly designed. In the proposed cooperative schemes, the best two-way relay channel between two secondary users is selected from a group of secondary users serving as cognitive relays and assists the bi-directional communication between the two secondary users without a direct link. The closed-form asymptotic expressions for outage probabilities of the two schemes are derived with a primary user protection constraint over Rayleigh fading channels. Based on the derived outage probabilities, the spectrum hole utilization is calculated to evaluate the percentage of spectrum holes used by the two secondary users for their successful information exchange without channel outage. Numerical results show that the spectrum hole utilization depends on the spectrum sensing overhead and the channel gain from a primary user to secondary users. Additionally, we compare the spectrum hole utilization of the two schemes as the varying of secondary signal to noise ratio, the number of cognitive relays, and symmetric and asymmetric channels.

• 한국식물생명공학회:학술대회논문집
• /
• 한국식물생명공학회 2005년도 추계학술대회 및 한일 식물생명공학 심포지엄
• /
• pp.106-111
• /
• 2005

For breeding of a new rootstock for eggplant production, somatic hybrids between two species, Solanum integrifolium and S. sanitwongsei were obtained through protoplast fusion. The former species has been commonly used for rootstock for eggplant production in Japan. Eggplants on these rootstocks are more productive than ungrafted plants, but are susceptible to bacterial wilt caused Ralstonia solanacearum. While the latter species is resistant, the growth of eggplants on this rootstock is rather slow and low yield. Protoplast of both species were isolated from cotyledons, and inactivated with iodoacetamide or UV-irradiation, then fused electrically. The fused products were then cultured. Regenerated plantlets were then transplanted on soil then maintained in a green house. The plants were classified into four groups. Those in the first group showed morphological characters intermediate of the parentalspecies. The plants bore fruit with viable seeds. The plants showed a chromosome number of 2n=48, the sum of those of the parental species, and are suggested to be symmetric fusion products. While plants in the other groupswas less vigorous and showed chromosome number 2n= 68 to 72 suggesting asymmetric fusion products by genomic in situ hybridization(GISH). Isozyme pattern of shikimate dehydrogenase (SKDH; EC 1.1.1.25), isocitrate dehydrogenase (IDH; EC 1.1.1.41) and phosphoglucomutase (PGM; EC 2.7.5.1) showed that 24 regenerated plants in three groups were somatic hybrids. Analysis of random amplified polymorphic DNA (RAPD) showed that 43 S. integrifolium-specific and 57 S. sanitwongsei-specific bands were all found in 24 plants. Both somatic hybrids and its S1 plants were found to be resistant to bacterial wilt, and eggplant grafted these plants using for rootstocks were more productive than grafted mother plants. Now, S1 progenies are used for commercial eggplant production in Osaka Prefecture.

• Bulletin of the Korean Chemical Society
• /
• 제14권5호
• /
• pp.561-567
• /
• 1993

The twelve macrocycle (L) complexes of cadmium(II) nitrate have been synthesized: $CdL(NO_3)_2$. All the complexes have been indentified by elemental analysis, electric conductivity measurements, IR and NMR spectroscopic techniques. The molar electric conductivities of the complexes in water and acetonitrile solvent were in the range of 236.8-296.1 $cm^2{\cdot}mol^{-1}{\cdot}ohm^{-1}$ at 25$^{\circ}$C. The characteristic peaks of macrocycles affected from Cd(II) were shifted to lower frequencies as compared with uncomplexed macrocycles. A complex with 1,4,8,11-tetrakis(methylacetato)-1,4,8,11-tetraaza cyclodecane (L4) exhibited two characteristic bands such as strong stretching (1646 $cm^{-1})$, and weaker symmetric stretching band (1384 $cm^{-1})$. NMR studies indicated that all nitrogen donor atoms of macrocycles have greater affinity to cadmium(II) metal ion than do the oxygen atoms. The $^{13}$C-resonance lines of methylene groups neighboring the donor atom such as N and S were shifted to a direction of high magnetic field and the order of chemical shifts were $L_1 < L_2 < L_3 < L_6 < L_4$. Also the chemical shifts values were larger than those of methylene groups bridgeheaded in side-armed groups. This result seems due to not only the strong interaction of Cd(Ⅱ) with nitrogen donors according to the HSAB theory, but weak interaction of Cd(Ⅱ) and COO- ions or sulfur which is enhanced by the flexible methylene spacing group in side-armed groups. Thus, each additional gem-methyl pairs of L_3, L_4\;and\; L_6$ macrocycles relative to $L_1, L_2,\;and\;L_5$ leads to an large enhancement in Cd(II) affinity. ^{13}C$-NMR spectrum of the complex with $L_{12}$ (1,5,9,13-tetracyclothiacyclohexadecane-3,11-diol) reveals the presence of two sets of three resonance lines, and intensities of the each resonance line have the ratio of 1 : 2 : 2. This molecular conformation is predicted as structure of tetragonal complex to be formed by coordinating two sulfur atoms and the other two sulfur atoms which is affected by OH-groups.

• 대한치과보철학회지
• /
• 제31권4호
• /
• pp.565-579
• /
• 1993

This study was accomplished to analyse and compare the occlusal contact patterns during eccentric mandibular movements in adult with normal occlusion. 50 subjects(male 27, female 23), who had natural occlusion and no symptom of temporomandibular disorder, were selected. Teeth contact patterns during mandibular eccentric movements were recorded and the distribution of tooth contacts in maximum intercuspation analysed by T-scan system. And then, tooth contact numbers recored by T-scan and silicone bite registration at centric occlusion were analysed and compared. The results obtained were as follows : 1. Antero-posteriorly, the qualitative center of occlusal contacts in centric occlusion were in the first molar areas, but there was a slight deviation in left-right directions. Thus, distribution of occlusal contacts were not bilaterally symmetric. 2. During the mandibular movements from centric occlusal position to right lateral and left lateral directions, the frequency that maxillary canine joined in lateral guidance was relatively high, but pure canine protected occlusion or pure group function occlusion had small frequency. 3. During mandibular protrusive movement, one or more maxillary central incisors frequently joined in protrusive guidance. 4. During mandibular eccentric movements, working and balancing side premature contact was observered in relatively high frequency. 5. In centric occlusal position, the numbers of occlusal contacts recorded on T-scan were relatively smaller than on silicone bite registration.

• 한국광물학회지
• /
• 제14권2호
• /
• pp.119-127
• /
• 2001

주구성 양이온이 Si와 Al인 딕카이트와 엽납석에 대하여 적외선분광분석(FTIR)을 실시하였다. 원적외선(Far-IR)영역과 중간적외선(Mid-IR)영역을 이용하였으며, 특히 $200 cm^{-1}$ / 이하의 Far-IR영역에서 처음으로 딕카이트의 흡수선들을 제시하였다. 딕카이트의 경우 일부 시료에서 소량의 카올리나이트나 나크라이트 층이 소량으로 협재되어 있다. 카올리나이트의 결정도를 나타내는 Hinckley지수는 딕카이트의 결정도와는 관련성이 적게 나타났다. 엽납석의 경우, 수산기와 관련된 신축진동흡수띠($3673~3676 cm^{-1}$ )는 약간 이상적인 구조에서 벗어나 있는데, 아마도 미량의 철에 의한 영향이나, 삼사형과 단사형이 섞여 있기 때문인 것으로 보인다.

• 한국근적외분광분석학회:학술대회논문집
• /
• 한국근적외분광분석학회 2001년도 NIR-2001
• /
• pp.1283-1283
• /
• 2001

NIR spectroscopy has been used extensively to investigate the structure of water, alcohol and other self-associate molecules because the frequencies of NIR bands due to OH and NH groups strength of hydrogen bonds. We have studied the structure of water -methanol mixtures by use of NIR spectroscopy. Strong features in the 7200-6300 $cm^{-1}$ / region consist of a number of overlapped bands due to the combination of OH antisymmetric and symmetric stretching modes of water and the first overtone of the OH stretching modes of free and hydrogen bonded methanol, while weak fratures in the 6000-5800 cm-1 region are ascribed to the first overtones of $CH_3$ stretching modes of methanol. We will focus the discussion on the $CH_3$ stretching bands. They seem to show a significant shift is not clear from the spectra shown in figure 1(a). Figure 1(b) depicts the second derivative in the 6000-5700 $cm^{-1}$ / region. Now, it is clear from the second derivative that there are two major bands near 5950 and 5900 $cm^{-1}$ / and that they do show a shift be about 30 $cm^{-1}$ / Why do the $CH_3$ bands show the shift with increasing concentration of methanol\ulcorner Probably, the CH, group interacts directly with OH groups of water. The results in figure 1(b) demonstrate the usefulness of the second derivative in resolution enhancement as well as the potential of NIR spectroscopy in the studies of molecular interactions.(Figure omitted).

• 정보처리학회논문지C
• /
• 제9C권3호
• /
• pp.313-322
• /
• 2002

본 논문에서는 IETF CAT Working Group에서 발표한 PKNIT 기반의 인증서비스를 향상시킨 Kerberos 인증 메커니즘을 제안한다. PHNIT기반의 X.509, BS/DNS를 적용하여 영역간의 서비스를 제공하는 인증과 키 교환방식으로 DNS를 통해 외부영역의 위치를 탐색하고 X.509 디렉토리 인증 시스템을 적용, 영역간 체인(CertPath)으로 DNS 서버로부터 공개키를 획득하여 다른 영역을 인증하도록 하였다. 영역간 인증과 키 교환은 Kerberos의 관용키 암호방식을 사용하고 세션 연결은 공개키 방식에 기반을 둔 X.509를 연동시키기 위하여 디렉토리서비스를 이용하였다. 이로써 Client를 확인하기 위한 임의 난수 키($K_{rand}$) 생성과 이로 인한 이중 암호화 과정을 배제하였으며 통신상의 Overload를 감소시키는 효과와 인증절차의 간소화를 가지는 Kerberos 시스템을 설계하였다.

• 한국광학회지
• /
• 제22권5호
• /
• pp.230-238
• /
• 2011

디지털 일안 반사식 카메라 또는 콤팩트 시스템 카메라용의 교환렌즈용 줌 광학계는 화각과 제품 사양에 따라 여러 가지 형태 가 있으므로, 하나의 AF(auto-focus)군으로만 줌 렌즈의 광각단과 망원단 2곳에서 상면이동의 보정(즉, 핀트 조정)이 불가능한 경우가 발생한다. 또한 줌 광학계의 광각단과 망원단 2곳에서의 후초점거리(back focal length, BFL)가 설정된 BFL 설계값과 일치하도록 조정하기 위해서는 적어도 2곳에서 핀트 조정을 해야 한다. 본 논문에서는 이러한 광학계에 대한 종민감도의 개념을 사용한 핀트 조정의 계산 방법에 대해 제안하고, 이 광학계에 대해 핀트 조정의 조정량 한계를 통계적 분석을 통하여 계산했다.