• 한국정밀공학회지
• /
• 제22권6호
• /
• pp.192-198
• /
• 2005

Recently, Automobile manufacturers regarding stability, economic environmental-friendly problems by the development of automobile. This reason is increasingly strict environmental regulations to lower fuel consumption and reduce emission. Designing more efficient and low emission control exhaust system results in more efficient Performance, reduced back Pressure and higher convert efficiency. Also to reduce the noise and the vibration of the automobile. According to develop variable type muffler, dual muffler and active intelligence exhaust system unit. Improvement in engine performance and fuel consumption rate, higher conversion efficiency demand information of pressure fraction and heat characteristics. To be able to determine these factor fur we experiment on each case of exhaust system unit. In this study, how back pressure is distributed in flow-through in exhaust system and how to design exhaust system flexibleness, efficiency, lower back pressure and optimal performance. This study furnish basic data for engineers, technicians.

• ETRI Journal
• /
• 제45권4호
• /
• pp.615-626
• /
• 2023

Under limited transmission conditions, many factors affect the efficiency of video transmission. During the flight of an unmanned aerial vehicle (UAV), frequent network switching often occurs, and the channel transmission condition changes rapidly, resulting in low-video transmission efficiency. This paper presents an efficient video coding flow for UAVs working in the 5G nonstandalone network and proposes two bit controllers, including time and spatial bit controllers, in the flow. When the environment fluctuates significantly, the time bit controller adjusts the depth of the recursive codec to reduce the error propagation caused by excessive network inference. The spatial bit controller combines the spatial bit mask with the channel quality multiplier to adjust the bit allocation in space to allocate resources better and improve the efficiency of information carrying. In the spatial bit controller, a flexible mini graph is proposed to compute the channel quality multiplier. In this study, two bit controllers with end-to-end codec were combined, thereby constructing an efficient video coding flow. Many experiments have been performed in various environments. Concerning the multi-scale structural similarity index and peak signal-to-noise ratio, the performance of the coding flow is close to that of H.265 in the low bits per pixel area. With an increase in bits per pixel, the saturation bottleneck of the coding flow is at the same level as that of H.264.

• 대한기계학회논문집
• /
• 제9권5호
• /
• pp.548-554
• /
• 1985

본 논문에서는 디이젤기관의 연소소음의 저감을 최종목표로 하여 Wiebe의 연 소함수에 의해 근사시킨 열발생속도의 변화가 디이젤기관의 연소소음 및 도시열효율에 미치는 영향에 관하여 수치실험을 통하여 해석검토하였다.

• 한국건설관리학회논문집
• /
• 제11권3호
• /
• pp.55-63
• /
• 2010

건설과정에서 발생하는 소음 진동에 대한 민원은 꾸준히 증가하고 있지만 공사 중 발생하는 소음 진동은 대부분 시공단계에서만 관리되고 있다. 이는 시공단계에서 발생하는 소음 진동 관리의 한계라고 판단되며, 공사 중 발생하는 소음 진동을 저감하기 위해 설계단계에서의 관리가 필요하다는 것을 의미한다. 본 논문의 목적은 공사 중 발생하는 소음 진동 관리의 효율성을 높이기 위해 설계단계에서 고려할 수 있는 공사 중 발생하는 소음 진동의 관리항목을 제시하고 이를 설계자가 직접 평가할 수 있는 평가시트와 관리 항목의 이해를 돕기 위한 매뉴얼을 개발하는 것이다. 이를 위해 기존 연구문헌을 검토 분석하여 설계단계에서 고려해야 할 공사 중 소음 진동의 관리항목을 식별하였고, 항목의 적정성을 검증하기 위해 환경전문가와 면담을 실시하여 9개 항목을 확정하였다. 항목간의 중요도 산정과 우선순위 식별을 위해 AHP(Analytic Hierarchy Process)기법을 적용하였다. 그 결과 설계단계에서 공사 중 발생하는 소음 진동을 관리하는데 가장 효율적인 항목들은 저소음 저진동 공법선정, 발파공사에 의한 소음 진동 저감방안, 소음 진동방지시설 설치 및 배치계획 순으로 나타났다. 본 연구의 성과는 공사 중 발생하는 소음 진동을 효율적으로 관리하여 환경분쟁 및 민원을 사전에 예방하고, 성공적인 건설사업을 위해 유익하게 활용될 것으로 기대된다.

• Journal of Mechanical Science and Technology
• /
• 제18권2호
• /
• pp.185-192
• /
• 2004

The aeroacoustic characteristics of a centrifugal fan for a vacuum cleaner and its noise reduction method are studied in this paper. The major noise source of a vacuum cleaner is the centrifugal fan. The impeller of the fan rotates at over 30000 rpm, and generates very high-level noise. It was revealed that the dominant noise source is the aerodynamic interaction between the rotating impeller and stationary diffuser. The directivity of acoustic pressure showed that most of the noise propagates backward direction of the fan-motor assembly. In order to reduce the high tonal sound generated from the aerodynamic interaction, unevenly pitched impeller and diffuser, and tapered impeller designs were proposed and experiments were performed. Uneven pitch design of the impeller changes the sound quality while the overall sound power level (SPL) and the performance remains similar. The effect of the tapered design of impeller was evaluated. The trailing edge of the tapered fan is inclined. This reduces the flow interaction between the rotating impeller and the stationary diffuser because of some phase shifts. The static efficiency of the new impeller design is slightly lower than the previous design. However, the overall SPL is reduced by about 4 dB(A). The SPL of the fundamental blade passing frequency (BPF) is reduced by about 6 dB (A) and the 2$\^$nd/ BPF is reduced about 20 dB (A). The vacuum cleaner with the tapered impeller design produces lower noise level than the previous one, and the strong tonal sound was dramatically reduced.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2004년도 전력전자학술대회 논문집(2)
• /
• pp.747-751
• /
• 2004

In recent years power supplies for telecommunication equipment is required smaller size and higher efficiency, and low noise operation. There exists a series resonant converter in which the switching loss is reduced in order to realize a high efficiency converter. However, if a constant voltage regulation is required. The switching frequency varies widely. In this paper we study the details of resonant DC-DC converter in which the realize a high efficiency converter.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제15권5호
• /
• pp.1814-1828
• /
• 2021

Low-light image enhancement is a key technique to overcome the quality degradation of photos taken under scotopic vision illumination conditions. The degradation includes low brightness, low contrast, and outstanding noise, which would seriously affect the vision of the human eye recognition ability and subsequent image processing. In this paper, we propose an approach based on deep learning and Retinex theory to enhance the low-light image, which includes image decomposition, illumination prediction, image reconstruction, and image optimization. The first three parts can reconstruct the enhanced image that suffers from low-resolution. To reduce the noise of the enhanced image and improve the image quality, a super-resolution algorithm based on the Laplacian pyramid network is introduced to optimize the image. The Laplacian pyramid network can improve the resolution of the enhanced image through multiple feature extraction and deconvolution operations. Furthermore, a combination loss function is explored in the network training stage to improve the efficiency of the algorithm. Extensive experiments and comprehensive evaluations demonstrate the strength of the proposed method, the result is closer to the real-world scene in lightness, color, and details. Besides, experiments also demonstrate that the proposed method with the single low-light image can achieve the same effect as multi-exposure image fusion algorithm and no ghost is introduced.

• 대한전자공학회논문지SD
• /
• 제41권10호
• /
• pp.77-83
• /
• 2004

VLSI 시스템에서 전력 소모를 줄이기 위해서는 메가블록이 동작하지 않는 동안 전원을 차단하여 누설 전류를 억제하는 방법이 효과적이다. 최근 들어 다중 문턱 전압 CMOS를 사용하여 전원을 차단하는 방법이 널리 연구되고 있으나, 동작 주파수가 증가함에 파라 전원 복귀에 필요한 시간이 짧아지게 되고, 짧은 시간에 전원이 복귀되면서 전원선에 대량의 전류가 순간적으로 흐르게 된다. 이에 따라 매우 큰 전원 잡음이 생겨서 전원 전압이 안정적이지 못하고 흔들리게 되며 이는 많은 경우 시스템의 오동작을 초래하게 된다. 본 논문에서는 이러한 문제점을 해결하기 위하여 새로운 전원 복귀 기법을 제안한다. 제안하는 기법은 메가블록의 전원이 차단되었다가 다시 복귀할 때 한꺼번에 전원을 켜는 것이 아니라 파이프라인 방식으로 몇 단계로 나누어 전원을 켬으로서 전원선에 흐르는 최대 전류 및 이에 따른 전원 잡음을 크게 억제한다. 제안하는 파이프라인 전원 복귀 기법을 검증하기 위해서 컴팩트 플래시 메모리 제어기 칩에 본 기법을 적용하여 곱셈기 블록의 전원을 차단하고 복귀할 때의 전원 잡음을 모의실험하고 분석하였다. 모의실험 결과, 제안하는 기법은 기존의 전원 차단 기법에 비해 전원 잡음을 매우크게 줄일 수 있음을 확인하였다.

• Journal of Power Electronics
• /
• 제6권1호
• /
• pp.45-51
• /
• 2006

A new high efficiency phase shifted full bridge (PSFB) converter for the power sustaining module of a plasma display panel (PDP) is proposed in this paper. The proposed converter employs a voltage doubler rectifier without an output inductor. Since it has no output inductor, the voltage stresses of the secondary rectifier diodes can be clamped at the output voltage level. No dissipative resistor-capacitor (RC) snubber for rectifier diodes is needed. Therefore, high efficiency, as well as, a low noise output voltage can be realized. Due to the elimination of the large output inductor, it features a simple structure, lower cost, smaller mass and lighter weight. Furthermore, the proposed converter has wide zero voltage switching (ZVS) ranges with low current stresses of the primary switches. Also the resonance between the leakage inductor of the transformer and the capacitor of the voltage doubler cell reduces the current stresses of the rectifier diodes. In this paper, operational principles, an analysis of the proposed converter and experimental results are presented.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제17권4호
• /
• pp.492-498
• /
• 2017

In this paper, we integrate a divide-by-3 injection-locked frequency divider (ILFD) in CMOS technology with a $0.18-{\mu}m$ BiCMOS process. We propose a self-injection technique that utilizes harmonic conversion to improve the locking range, phase-noise, and input sensitivity simultaneously. The proposed self-injection technique consists of an odd-to-even harmonic converter and a feedback amplifier. This technique offers the advantage of increasing the injection efficiency at even harmonics and thus realizes the low-power implementation of an odd-order division ILFD. The measurement results using the proposed self-injection technique show that the locking range is increased by 47.8% and the phase noise is reduced by 14.7 dBc/Hz at 1-MHz offset frequency with the injection power of -12 dBm. The designed divide-by-3 ILFD occupies $0.048mm^2$ with a power consumption of 18.2-mW from a 1.8-V power supply.