• Journal of the korean society of oceanography
• /
• 제31권4호
• /
• pp.217-231
• /
• 1996

The distribution patterns of the benthic macrofauna of Han Estuary and Kyonggi Bay and the controlling environmental factors were studied at twenty-five stations in spring and fall of 1989. As a result, four biological groups were established as follows : Crassostrea gigas-Balanus reticulatus (Group I), Heteromastus filiformis-Mediomastus californiensis-Lumbrineris spp. -Sternaspis scutata-Tharyx sp. 1-Diopatra bilobata (Group II-A), Haustoriids-Phoxocephalids-Moerella rutila (Group II-B) and Nephtys chemulpoensis (Group II-C in March) and indistinctive group which was composed of common species (II-C in September). Results of the habitat analysis revealed that most of the dominant species showed narrow ranges of habitat niche in March and relatively wide ranges in September. Based on multiple discriminant analysis, the critical environmental factors governing their distributions are salinity in the regions of Yomha and Sokmo Channel in Han Estuary and sediment types in Kyonggi Bay. Also, sediment instability during the rainy season due to run-off was assumed to play a major role in the species composition of the benthic communities and their distribution in the study area.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.1582-1585
• /
• 2009

The effects of bias stress on spin-coated zinc tin oxide (ZTO) transistors are investigated. Applying a positive bias stress results in the displacement of the transfer curves in the positive direction without changing the field effect mobility or the subthreshold behavior. Device instability appears to be a consequence of the charging and discharging of temporal trap states at the interface and in the zinc tin oxide channel region.

• 대한기계학회논문집B
• /
• 제31권2호
• /
• pp.202-207
• /
• 2007

In order to understand the phenomena of combustion instability, an experimental study was conducted at the moderate pressure and ambient temperature conditions. The flame behavior and the pressure fluctuations were measured in a dump combustor. Various types of combustion modes occurred in accordance with the equivalence ratio and the fuel supplying conditions. The fluctuation of pressure, heat release and equivalence ratio were measured by piezoelectric pressure sensor, high speed Intensified Charge Coupled Device (HICCD) camera and gas chromatography respectively. Two representative modes were self-excited pressure oscillations at the resonance of combustion chamber (200Hz) and instabilities related to the modulated fuel flow rate through the fuel holes (10Hz). It is found that, especially in an unchoked fuel flow condition, the modulation of the fuel flow rate affects the characteristics of flame behavior and pressure fluctuations in a lean premixed flame.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2005년도 제24회 춘계학술대회논문집
• /
• pp.364-367
• /
• 2005

공동이 있거나 없는 일정 단면적 및 확장형 스크램제트 연소기 내에 수소 연료가 $0.5\sim1.5\;MPa$ 로 수직 분사되는 것을 고려하여 연소 및 동결 유동에 대한 일련의 수치해석을 수행 하였다. 내재된 물리 과정을 규명하기에 충분한 정확도로 진동하는 유동 및 화염의 동적 특성을 포착하였으며, 이로부터 연소기의 형상과, 공동 및 발열량의 영향을 이해할 수 있었다.

• 한국산업융합학회 논문집
• /
• 제25권2_2호
• /
• pp.193-198
• /
• 2022

In this paper, we introduce the improved control method are communicated between a master and a slave robot in the teleoperation systems. When the master and slave robots are located in different places, time delay is unavoidable under the network environment and it is well known that the system can become unstable when even a small time delay exists in the communication channel. The time delay may cause instability in teleoperation systems especially if those systems include haptic feedback. This paper presents a control scheme based on the estimator with virtual master model in teleoperation systems over the network. As the behavior of virtual model is tracking the one of master model, the operator can control real master robot by manipulating the virtual robot. And LQG/LTR scheme was adopted for the compensation of un-modeled dynamics. The approach is based on virtual master model, which has been implemented on a robot over the network. Its performance is verified by the computer simulation and the experiment.

• Advances in aircraft and spacecraft science
• /
• 제5권4호
• /
• pp.445-458
• /
• 2018

Turbulent airflow in channels of rectangular cross section with symmetric centerbodies is studied numerically. Shock wave configurations formed in the channel and in front of the entrance are examined. Solutions of the unsteady Reynolds-averaged Navier-Stokes equations are obtained with finite-volume solvers of second-order accuracy. The solutions demonstrate an expulsion/swallowing of the shocks with variations of the free-stream Mach number or angle of attack. Effects of the centerbody length and thickness on the shock wave stability and flow bifurcation are examined. Bands of the Mach number and angle of attack, in which there exist non-unique flow fields, are identified.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 춘계학술대회
• /
• pp.129-132
• /
• 2007

Advanced structure of metal-supported solid oxide fuel cells was devised to overcome sealing problem and mechanical instability in ceramic-supported solid oxide fuel cells. STS430 whose dimensions were 26mm diameter, 1mm thickness and 0.4mm channel width was used as metal support. Thin ceramic layer composed of anode(Ni/YSZ) and electrolyte(YSZ) was joined with STS430 metal support by using a cermet adhesive. $La_{0.8}Sr_{0.2}Co_{0.4}Mn_{0.6}O_{3}$ perovskite oxide was used as cathode material. It was noted that oxygen reduction reaction of cathode governed the overall cell performance from oxygen partial pressure dependance.

• 전기학회논문지
• /
• 제61권11호
• /
• pp.1725-1731
• /
• 2012

In this paper, experiments were conducted to validate the importance and necessity of modeling. The modeling was performed using 120Hz and 280Hz noise of KTX main interior noise frequency. After the modeling, In order to solve the system instability by the additional path that exists between the control speaker and the error microphone, the secondary path was estimated. Next, simulations were performed to verify the modeling's necessity and importance. Thought the simulation results, we confirmed that the system with the modeling is more effective for noise reduction than without the modeling.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2006년도 제33회 KOSCO SYMPOSIUM 논문집
• /
• pp.27-35
• /
• 2006

It has been observed in experiments that combustion instability of low frequency (${\sim}$ 10Hz) results form the modulation of equivalence ratio at fuel injection hole when a pressure fluctuation propagates upwards along the channel of the burner under an unchoked fuel flow condition. In this study, a commercial program was used to determine how the fuel flow rate changed with respect to the pressure, velocity of the fuel flow and the mass fraction in a choked and an unchoked condition. The calculation focus on the upstream of the dump plane to know how the forced pressure with the fuel injection conditions affects the modulation of the equivalence ratio. Therefore, it is found that pressure fluctuation leads to oscillation of mass flow rate and then results in equivalence ratio modulation under the unchoked fuel flow condition.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 II
• /
• pp.719-722
• /
• 2003

This work investigates the device degradation p-channel PD SOI devices at various applied voltages as well as stress temperatures with respect to Body-Contact SOI (BC-SOI) and Floating-Body SOI (FB-SOI) MOSFETs. It is observed that the drain current degradation at the gate voltage of the maximum gate current is more significant in FB-SOI devices than in BC-SOI devices. For a stress at the gate voltage of the maximum gate current and elevated temperature, it is worth noting that the $V_{PT}$ Will be decreased by the amount of the HEIP plus the temperature effects. For a stress at $V_{GS}$ = $V_{DS}$ . the drain current decreases moderately with stress time at room temperature but it decreases significantly at the elevated temperature due to the negative bias temperature instability.