• Proceedings of the KIEE Conference
• /
• 2001.11c
• /
• pp.394-397
• /
• 2001

There are several methods of measuring position. For example GPS, AOA, TDOA and using radio camera. In this Paper I used TDOA method in position measuring system. TDOA method uses arrival time difference. In position measuring system, three transfers which is placed in different position transfer signal to receiver in fixed time interval and receiver records arrival time of signal. Because receiver knows idle signal's arrival time, receiver can calculate the difference of the signal's arrival time between idle and real. When we obtain time difference we can know the receiver position by Newton Raphson method.

• Journal of the Korea Society for Simulation
• /
• v.13 no.2
• /
• pp.1-12
• /
• 2004

This paper estimated the arrival angle and electric wave delay time using the space method law and the directions of arrival (DOA) estimation algorithm in case of signal correlation. Space method law is the method used to repress cross correlation before applying the weight value to the receiving signal. The values of the diagonal elements in the correlation matrix were averaged to replace as the diagonal elements value. In the area of wireless communication or mobile communication, there are high correlations in case of low delay time difference in multiple waves. This causes the quality of the communication to drop due to interference with the desired signal elements. This paper estimated the arrival angle and electric wave delay time using the space method law and the MUSIC algorithm. With the arrival angle algorithm, the arrival angle cannot be estimated below 5 in case of signal correlations because the angle resolution capacity decreases accordingly. The super resolution capacity was estimated to determine the arrival angle below 5 in this paper. In addition, the proposed algorithm estimated the short delay time difference to be below 20ns.

• The Journal of the Acoustical Society of Korea
• /
• v.37 no.4
• /
• pp.206-214
• /
• 2018

This paper proposes an impact point estimation algorithm of the rifle using microphone sensors. The proposed algorithm resolves the time synchronization problem by expanding the existing ToA (Time of Arrival) method to TDoA (Time Difference of Arrival) method and verifies the performance of the algorithm through the actual shooting experiments. By comparing analysis of the actual and the estimated impact points by the algorithm, it is confirmed that the proposed algorithm has excellent performance by estimating the impact point accurately within the tolerance range.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.7C
• /
• pp.608-615
• /
• 2007

Generally time of arrival (TOA) information via two way communications can be derived by accurate round trip time (RTT) between two devices. However, response time demanded in RTT measurement is long, a serious TOA error is caused by each different clock drift between two devices. In order to solve this problem, we propose the TOA and time difference of arrival (TDOA) estimation scheme with mitigating clock drift effect. To verify the performance of proposed method, we compared the proposed scheme with one way based TDOA acquisition method introduced by IEEE 802.15.4a Task Group and then we could conclude that the proposed method has better performance over other methods.

• Journal of Advanced Navigation Technology
• /
• v.21 no.2
• /
• pp.163-170
• /
• 2017

MLAT which is an independent cooperative surveillance system is applied to increase the positon resoultin of secondary survelliance radar. MLAT uses the hyperboic or hyperboloid position mesurement algorithm. Central processing unit of MLAT calculates target position using time difference of arrival (TDOA) which can be solved from time of arrival (TOA) information of each receivers (at least 4 receivers). To increase position resolution of MLAT which use TDOA, TOA which is transfer time from tranmitter to receiver shold be calculated with precision time resolution in receiver. This paper explained the MLAT system briefly and explained ATD which is one of means of calcuating pulse position. ATD is applied to solve the deviation of pulse position due to different amplitude of signals in mulitiple receivers. In this paper, to analysis the performance of ATD, the simulation result of LAS and CDS was compared with the simulation result of basic threshold method.

• Journal of Information Technology Applications and Management
• /
• v.22 no.3
• /
• pp.105-114
• /
• 2015

This paper presents a fast Time Difference of Arrival (TDOA) estimation for sound source localization. TDOA is the time difference between the arrival times of a signal at two sensors. We propose a partial cross correlation method to increase the speed of TDOA estimation for sound source localization. We do this by predicting which part of the cross correlation function contains the required TDOA value with the help of the signal energies, and then we compute the cross correlation function in that direction only. Experiments show approximately 50% reduction in the cross correlation computation time thereby increasing the speed of TDOA computation. This makes it very relevant for real world surveillance.

• ETRI Journal
• /
• v.34 no.2
• /
• pp.260-263
• /
• 2012

In this letter, we propose a moving-target tracking algorithm based on a particle filter that uses the time difference of arrival (TDOA)/frequency difference of arrival (FDOA) measurements acquired by distributed sensors. It is shown that the performance of the proposed algorithm, based on the particle filter, outperforms the one based on the extended Kalman filter. The use of both the TDOA and FDOA measurements is shown to be effective in the moving-target tracking. It is proven that the particle filter deals with the nonlinear nature of the movingtarget tracking problem successfully.

• 한국정보통신설비학회:학술대회논문집
• /
• 2007.08a
• /
• pp.185-190
• /
• 2007

This article describes a development CDMA LBS in order to apply to "Control System of Underground Infrastructure Fire Accident" which one of U-City Projects of Seoul City. Our goal guides taking shelter of the sufferer it will not be able to use a GPS when the fire occurs from subway station. There are Location measurement methods which measures the AOA(Angle of Arrival) of the signal which it sends with the MS(Mobile station) from the BS(Base station), an electronic delivery time (TOA:Time of Arrival) and the relative difference of electronic arrival time from Base stations (TDOA:Time Difference of Arrival). This time the error due to a multiplex course error and near-far problem and NLOS(Non Line of Sight). We are planning to construct the Test Bed which is an error below 1 meter.

• Proceedings of the IEEK Conference
• /
• 2002.06a
• /
• pp.149-152
• /
• 2002

In this paper, an adaptive interference canceller (AIC) Is applied to the space-time coded DS-CDMA system in fading channels with arrival time difference from multiple transmit antennas In a CDMA system, arrival time difference causes not only inter-antenna and Inter-symbol interference but also multiple-access Interference even in a downlink. To mitigate the effect of the Interferences an AIC and ML decoding joint scheme Is proposed fur a space-time coded DS-CDMA system in which an adaptation process of tile AIC is merged in the Viterbi decoding algorithm. The performance of the proposed receiver is evaluated for the system with two transmit antennas. It is shown that the proposed receiver achieves significant performance improvement over the ML decoding receiver without the AIC

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.37 no.10
• /
• pp.1-8
• /
• 2000

In this paper, positioning schemes based on AOA(Angle of Arrival), TOA(Time of Arrival), and TDOA(Time Difference of Arrival) measurements are reviewed and analyzed. In the case of using those schemes in microcell structure with severe multipath fading and shadowing conditions, the rapid and unpredictable variation of signal level makes it difficult to estimate the position and velocity of mobiles. Therefore, we propose a novel mobile tracking method based on the multicriteria decision making, in which uncertain parameters such as RSS(Received Signal Strength), the distance between mobile and base station, the moving direction, and the previous location are participated in the decision process using aggregation function in fuzzy set theory. Through a simulation, we analysis the impaction of the frequent change of direction and speed of mobiles.