• The KIPS Transactions:PartA
• /
• v.14A no.5
• /
• pp.301-308
• /
• 2007

This paper proposes high performance coprocessor architecture for real time dense disparity computation based on a phase-based binocular stereo matching technique called local weighted phase-correlation(LWPC). The algorithm combines the robustness of wavelet based phase difference methods and the basic control strategy of phase correlation methods, which consists of 4 stages. For parallel and efficient hardware implementation, the proposed architecture employs SIMD(Single Instruction Multiple Data Stream) architecture for each functional stage and all stages work on pipelined mode. Such that the newly devised pipelined linear array processor is optimized for the case of row-column image processing eliminating the need for transposed memory while preserving generality and high throughput. The proposed architecture is implemented with Xilinx HDL tool and the required hardware resources are calculated in terms of look up tables, flip flops, slices, and the amount of memory. The result shows the possibility that the proposed architecture can be integrated into one chip while maintaining the processing speed at video rate.

• Journal of KIISE:Computer Systems and Theory
• /
• v.34 no.1
• /
• pp.10-18
• /
• 2007

Mobile communication devices such as PDAs, cellular phones, etc., need to perform several kinds of computation-intensive functions including H.264 encoding/decoding and 3D graphics processing. In this paper, new reconfigurable architecture is described, which can perform either motion estimation for H.264 or rendering for 3D graphics. The proposed motion estimation techniques use new efficient SAD computation ordering, DAU, and FDVS algorithms. The new approach can reduce the computation by 70% on the average than that of JM 8.2, without affecting the quality. In 3D rendering, midline traversal algorithm is used for parallel processing to increase throughput. Memories are partitioned into 8 blocks so that 2.4Mbits (47%) of memory is shared and selective power shutdown is possible during motion estimation and 3D graphics rendering. Processing elements are also shared to further reduce the chip area by 7%.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.5B
• /
• pp.348-356
• /
• 2012

The application traffic analysis is getting more and more challenging due to the huge amount of traffic from high-speed network link and variety of applications running on wired and wireless Internet devices. Multi-level combination of various analysis methods is desired to achieve high completeness and accuracy of analysis results for a real-time analysis system, while requires much of processing burden on the contrary. This paper proposes a novel architecture for a real-time traffic analysis system which improves the processing performance on multi-core CPU environment. The main contribution of the proposed architecture is an efficient parallel processing mechanism with multiple threads of various analysis methods. The feasibility of the proposed architecture was proved by implementing and deploying it on our campus network.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.9
• /
• pp.59-70
• /
• 2007

In this paper, we proposed an effective T&L(Transform & Lighting) Processor architecture for a real time 3D graphics acceleration SoC(System on a Chip) in a mobile system. We designed Floating point arithmetic IPs for a T&L processor. And we verified IPs using a SoC Platform. Designed T&L Processor consists of 24 bit floating point data format and 16 bit fixed point data format, and supports the pipeline keeping the balance between Transform process and Lighting process using a parallel computation of 3D graphics. The delay of pipeline processing only Transform operation is almost same as the delay processing both Transform operation and Lighting operation. Designed T&L Processor is implemented and verified using a SoC Platform. The T&L Processor operates at 80MHz frequency in Xilinx-Virtex4 FPGA. The processing speed is measured at the rate of 20M Vertexes/sec.

• Journal of IKEEE
• /
• v.21 no.4
• /
• pp.358-367
• /
• 2017

Advanced Driver Assistance Systems(ADAS), such as Front Collision Warning System (FCWS) are currently being developed. FCWS require high processing speed because it must operate in real time while driving. In addition, a low-power system is required to operate in an automobile embedded system. In this paper, FCWS is implemented in CPU-FPGA architecture in embedded system to enable real-time processing. The lane detection enabled the use of the Inverse Transform Perspective (IPM) and sliding window methods to operate at fast speed. To detect the vehicle, a Convolutional Neural Network (CNN) with high recognition rate and accelerated by parallel processing in FPGA is used. The proposed architecture was verified using Intel FPGA Cyclone V SoC(System on Chip) with ARM-Core A9 which operates in low power and on-board FPGA. The performance of FCWS in HD resolution is 44FPS, which is real time, and energy efficiency is about 3.33 times higher than that of high performance PC enviroment.

• Journal of Korea Multimedia Society
• /
• v.9 no.1
• /
• pp.89-100
• /
• 2006

The introduction of GSMP open interface to OBS network can materialize to separate the transport plane and the control plane in OBS network. This makes the implementation of OBS switches simple and provides various flexibility. However, the introduction of open interface will cause the connection setup delay because of the additional processing overhead of open interface protocol. Also, in GSMP based network, the location of network management functions are not defined explicitly and the research result about the OBS network management is almost nothing. This paper proposes a parallel connection setup mechanism using centralized connection control server to minimize connection setup delay in OBS network with GSMP open interface and defines managed objects to support connection, configuration, performance, and fault management for the management of OBS network with GSMP open interface. This paper also proposes a distributed network management model, in which the above managed objects are distributed in a controller and an OBS switch according to network management functions. We verify the possibility of OBS control and network management by implementing network management function using proposed parallel connection setup mechanism and distributed network management model.

• KIPS Transactions on Computer and Communication Systems
• /
• v.7 no.3
• /
• pp.67-72
• /
• 2018

Recently, noise reduction in an axial fan producing the small pressure rise and large flow rate, which is one type of turbomachine, is recognized as essential. This study describes the design and optimization techniques of MPI parallel program to simulate the flow-induced noise in the axial fan. In order to simulate the code using 100 million number of grids for flow and 70,000 points for noise sources, we parallelize it using the 2D domain decomposition. However, when it is involved many computing cores, it is getting slower because of MPI communication overhead among nodes, especially for the noise simulation. Thus, it is adopted the one-sided communication to reduce the overhead of MPI communication. Moreover, the allocated memory and communication between cores are optimized, thereby improving 2.97x compared to the original one. Finally, it is achieved 12x and 6x faster using 6,144 and 128 computing cores of KISTI Tachyon2 than using 256 and 16 computing cores for the flow and noise simulations, respectively.

• Journal of KIISE:Computer Systems and Theory
• /
• v.26 no.7
• /
• pp.752-765
• /
• 1999

대부분 병렬처리 시스템에서 성능 파라미터는 복잡하고 프로그램의 수행 시 예견할 수 없게 변하기 때문에 컴파일러가 프로그램 수행에 대한 최적의 성능 파라미터들을 컴파일 시에 결정하기가 힘들다. 본 논문은 병렬 처리 시스템의 프로그램 수행 시, 변화하는 시스템 성능 상태에 따라 전체 성능이 최적화로 적응하는 적응 수행 방식을 제안한다. 본 논문에서는 이 적응 수행 방식 중에 적응 프로그램 수행을 위한 이론적인 방법론 및 구현 방법에 대해 제안하고 적응 제어 수행을 위해 프로그램의 데이타 공유 단위에 대한 적응방식(적응 입도 방식)을 사용한다. 적응 프로그램 수행 방식은 프로그램 수행 시 하드웨어와 컴파일러의 도움으로 프로그램 자신이 최적의 성능을 얻을 수 있도록 적응하는 방식이다. 적응 제어 수행을 위해 수행 시에 병렬 분산 공유 메모리 시스템에서 프로세서 간 공유될 수 있은 데이타의 공유 상태에 따라 공유 데이타의 크기를 변화시키는 적응 입도 방식을 적용했다. 적응 입도 방식은 기존의 공유 메모리 시스템의 공유 데이타 단위의 통신 방식에 대단위 데이타의 전송 방식을 사용자의 입장에 투명하게 통합한 방식이다. 시뮬레이션 결과에 의하면 적응 입도 방식에 의해서 하드웨어 분산 공유 메모리 시스템보다 43%까지 성능이 개선되었다. Abstract On parallel machines, in which performance parameters change dynamically in complex and unpredictable ways, it is difficult for compilers to predict the optimal values of the parameters at compile time. Furthermore, these optimal values may change as the program executes. This paper addresses this problem by proposing adaptive execution that makes the program or control execution adapt in response to changes in machine conditions. Adaptive program execution makes it possible for programs to adapt themselves through the collaboration of the hardware and the compiler. For adaptive control execution, we applied the adaptive scheme to the granularity of sharing adaptive granularity. Adaptive granularity is a communication scheme that effectively and transparently integrates bulk transfer into the shared memory paradigm, with a varying granularity depending on the sharing behavior. Simulation results show that adaptive granularity improves performance up to 43% over the hardware implementation of distributed shared memory systems.

• Journal of Digital Contents Society
• /
• v.19 no.4
• /
• pp.771-777
• /
• 2018

This study proposes a big data based risk analysis framework to analyze more comprehensive disaster risk and vulnerability. We introduce a distributed and parallel framework that allows large volumes of data to be processed in a short time by using open-source disaster risk assessment tool. A performance analysis of the proposed system presents that it achieves a more faster processing time than that of the existing system and it will be possible to respond promptly to precise prediction and contribute to providing guideline to disaster countermeasures. Proposed system is able to support accurate risk prediction and mitigate severe damage, therefore will be crucial to giving decision makers or experts to prepare for emergency or disaster situation, and minimizing large scale damage to a region.

• Laser Solutions
• /
• v.7 no.2
• /
• pp.19-26
• /
• 2004

The effect of shield gas on the weldability, mechanical properties and formability of CO2 laser weld joint in 600MPa grade high strength steel was investigated. Bead on plate welds were made under various welding speed and shield gas. Tensile test was carried out under the load of perpendicular and parallel direction to the weld line, Formability of the joint was evaluated by Erichsen test. As the welding speed increases, the porosity fraction decreases. The porosity fraction in the joint used Ar-$50\%He$ mixed gas as a shield gas was lower than that of the joint used Ar gas. Hardness at the weld metal of full penetrated joint was nearly equal to that of water quenched raw metal. In a tensile test under a perpendicular load to the weld axis, strength and elongation of joint produced by optimum condition were nearly equal to those of base metal. However, the strength of joint in a tensile test under a parallel load to weld axis was higher than that of raw metal, but the elongation of joint was lower than that of raw metal. Elongation and formability were further increased by the method of using Ar+He mixed gas as a shield gas as compared with Ar gas. Formabilities of joints were recorded ranging from $58\%\;to\;70\%$ of that of base metal with different shield gases.