• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.11a
• /
• pp.3-4
• /
• 2005

Germanium nanocrystals(NCs) were formed in the silicon dioxide($SiO_2$) on Si layers by Ge implantation and rapid thermal annealing process. The density and mean size of Ge-NCs heated at $800^{\circ}C$ during 10 min were confirmed by High Resolution Transmission Electron Microscopy. Capacitance versus voltage(C-V) measurements of MOS capacitors with single $Al_2O_3$ capping layers were performed in order to study electrical properties. The C-V results exhibit large threshold voltage shift originated by charging effect in Ge-NCs, revealing the possibility that the structure is applicable to Nano Floating Gate Memory(NFGM) devices.

• The Journal of Korea Assosiation for Disability and Oral Health
• /
• v.12 no.2
• /
• pp.45-49
• /
• 2016

This study investigates the success rate of pulpotomy using electrosurgery operated on a primary molar in caries. The pulpotomy using electrosurgery was done on 253 primary molars of 111 young patients from 2 to 9 years old during the period of the first day of January 2011 to the last day of December 2015. After the amputation of pulp and hemostasis of primary molar were done using electrosurgery, MTA as pulp capping material was applied to the primary molar and the tooth was restored with the stainless steel crown. The follow up period after the treatment ranged from 4-46 months. The clinical and radiographic success rate ranged from 92.1 - 94.3%. Which is comparable to formocresol and ferric sulfate pulpotomy. Due to its non-pharmacological characteristic, electrosurgery can minimize harmful effect on the pulp tissue. Its fast bleeding control makes it easy and safe to use in pediatric and disabled patients in comparatively simple manner. Electrosurgery can be an alternative for pulp therapy considering the side effects of pharmacological ways.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.5
• /
• pp.1375-1378
• /
• 2014

In this study, maghemite (${\gamma}-Fe_2O_3$) nanoparticles were produced using gelatin protein as an effective mediator. Size, shape, surface morphology and magnetic properties of the prepared ${\gamma}-Fe_2O_3$ nanoparticles were characterized using XRD, FT-IR, TEM, SEM and VSM data. The effects of furnace temperature and time of heating together with the amount of gelatin on the produced gelatin-$Fe_3O_4$ nanocomposite were examined to prove the fundamental effect of gelatin; both as a capping agent in the nanoscale synthesis and as the director of the spinel ${\gamma}-Fe_2O_3$ synthesis among possible $Fe_2O_3$ crystalline structures.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.2
• /
• pp.393-397
• /
• 2012

We report a new route to synthesize high quality zinc blende CdS and ZnS nanocrystals in noncoordinating solvent 1-octadecene, using dodecanethiol (DDT) molecules as both the sulfur source and surface capping ligands. Different reaction temperatures and Cd(Zn)/DDT molar ratios were tested to optimize the synthesis conditions. Absorption photoluminescence (PL) spectroscopy, Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD) pattern, and transmission electron microscopy (TEM) were used to characterize assynthesized nanocrystals. The narrow half width at the half-maximum on the long wavelength side of the firstexcitonic absorption peak and TEM images demonstrated nearly monodisperse size distributions of asprepared CdS, ZnS, and CdS/ZnS core/shell nanocrystals. Only trap emissions of the nanocrystals were detected when the amount of DDT was excessive, this came from the strong quenching effect of thiol groups on the nanocrystal surfaces. After overcoating with ZnS shells, band-gap emissions of CdS nanocrystals were partially recovered.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.186-186
• /
• 2012

This report investigates a new synthetic route and the size-dependent optical and electrical properties of PbS nanocrystal quantum dots (NQDs) in diameters ranging between 1.5 and 6 nm. Particularly we synthesize ultra-small sized PbS NQDs having extreme quantum confinement with 1.5~2.9 nm in diameter (2.58~1.5 eV in first exciton energy) for the first time by adjusting growth temperature and growth time. In this region, the Stokes shift increases as decreasing size, which is testimony to the highly quantum confinement effect of ultra-small sized PbS NQDs. To find out the electrical properties, we fabricate self-assembled films of PbS NQDs using layer by layer (LBL) spin-coating method and replacing the original ligands with oleic acid to short ligands with 1, 2-ethandithiol (EDT) in the course. The use of capping ligands (EDT) allows us to achieve effective electrical transport in the arrays of solution processed PbS NQDs. These high-quality films apply to Schottky solar cell made in an glass/ITO/PbS/LiF/Al structure and thin-film transistor varying the PbS NQDs diameter 1.5~6 nm. We achieve the highest open-circuit voltage (＜0.6 V) in Schottky solar cell ever using PbS NQDs with first exciton energy 2.58 eV.

• Journal of Magnetics
• /
• v.9 no.1
• /
• pp.13-16
• /
• 2004

Magnetic tunnel junctions (MTJs) comprising amorphous CoNbZr layers have been investigated. $Co_{85.5}Nb_8Zr_{6.5}$(in at. %) layers were employed to substitute the traditionally used Ta layers with an emphasis given on under-standing underlayer effect. The typical junction structure was $SiO_2/CoNbZr$ or Ta 2/CoFe 8/IrMn 7.5/CoFe 3/Al 1.6 + oxidation/CoFe 3/CoNbZr or Ta 2 (nm). For both as-deposited state and after annealing, the CoNbZr-underlayered structure showed superior surface smoothness up to the tunnel barrier than Ta-underlayerd one (rms roughness of 0.16 vs. 0.34 nm). CoNbZr-based MTJs was proven beneficial for increasing thermal stability and increasing $V_h$ (the bias voltage where MR ratio becomes half) characteristics than Ta-based MTJs. This is because the CoNbZr-based junctions offer smoother interface structure than the Ta-based one.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.09a
• /
• pp.1213-1216
• /
• 2010

Developable areas nearby metropolitan areas, which has high the density of population are limited by highly industrialized. In recent, the redeveloping plans for the finished industrial and resident areas are pushing to resolve this problems. Getting to the exact properties for reclaimed wastes is very important to reuse of landfill. Also, a strategy for how to deal with follow-up measures have to based on the waste characteristics. A lot of environmental problems have been happened in finished waste landfill such as a nasty smell by seepage, pollution of surface and ground water, a poisonous gas and soil contamination. The environment pollution in waste landfill have been studied by many researchers. The goal of this study is estimate the effects for the ground properties with the environmental properties of waste in finished landfill. As the results, the chemical characteristics of seepage in landfill may effect directly or indirectly to capping layer. Therefore, sustainable researches are needed to develop a secure landfill over the long term.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.354-354
• /
• 2011

ZnO 나노와이어는 밴드 갭이 3.37 ev로 큰 밴드 갭을 갖는 물질이며 엑시톤 결합에너지가 60 meV로 GaN(25 meV)같은 다른 반도체보다 매우 크다. 또한 밴드갭 에너지가 큰 GaN, SiC와 같은 반도체에 비해서 화학적, 열적 안정성이 크며 낮은 온도에서 성장이 가능하다는 장점이 있다. 본 연구에서는 pre-heating process를 이용하여 1차원 구조인 ZnO nanowire를 수열합성법으로 합성하였다. 실험방법으로는 E2K glass 기판위에 AZO40 nm를 증착후, 시드층으로 이용하여 ZnO nanowire를 성장하였다. precusor 전구체에는 ZN(NO3)2 ${\cdot}$ 6H2O와 Capping agent으로의 역할을 위해 PEI와 OH-source 공급을 위한 Ammonium chloride를 첨가하여 합성하였고, 그에 따른 ZnO nanowire의 morphology 및 aspect ratio를 조절하고자 하였다. 마지막으로 ZnO 나노와이어의 구조적, 광학적 특성 평가를 하기위해 XRD, FE-SEM, PL 등을 이용하여 측정 하였고, 향후 나노발전기, 태양전지 등 여러 광학기기 등에 전극재료로서 응용 가능성에 대해 알아보고자 하였다.

• Archives of Pharmacal Research
• /
• v.28 no.4
• /
• pp.493-501
• /
• 2005

Effect of solvents on physical characteristics and release characteristics of monolithic acetaminophen (APAP) hydroxypropylmethylcellulose (HPMC) matrix granules and tablets were examined. Various types and amounts of solvents were employed for granulation and coating. APAP and other excipients were mixed and were then wet-granulated in a high-speed mixer. The dried granules were then directly compressed and film-coated with low viscosity grade HPMC. As the amount of water increased, the size of granules also increased, showing more spherical and regular shape. However, manufacturing problems such as capping and lamination in tableting occurred when water was used alone as a granulating solvent. The physical properties of HPMC matrix granules were not affected by the batch size. The initial release rate as well as the amount of APAP dissolved had a tendency to decrease as the water level increased. Addition of nonaqueous solvent like ethanol to water resulted in good physical properties of granules. When compared to water/ethanol as a coating solvent, the release rate of film-coated HPMC matrix tablets was more sensitive to the conditions of coating and drying in methylene chloride/ethanol. Most of all, monolithic HPMC matrix tablet when granulated in ethanol/water showed dual release with about $50\%$ drug release immediately within few minutes followed by extended release. It was evident that the type and amount of solvents (mainly water and ethanol) were very important for wet granulation and film-coating of monolithic HPMC matrix tablet, because the plastic deforming and fragmenting properties of material were changed by the different strengths of the different solvents.

• Journal of Navigation and Port Research
• /
• v.29 no.3 s.99
• /
• pp.257-262
• /
• 2005

Environmental problems and safety problems in coastal area is one of the most important factors for designing coastal structures and maintaining facilities in coastal zone. And thus study on Wave transformation around coastal area is very important to develope a new port or on industrial area. Delft 3D-WAVE is applied to Ulsan new port area and the culculated results are analysed and compared with measured data Delft 3D-wave module is based on SWAN model which considers wave shoaling and refraction for irregular wave. This module also covers wind effect, bottom friction. white-capping and wave breaking effect. The results of this study show a good agreement with measured data and thus Delft 3D-WAVE module can be applied to simulate irregular wave transformation in coastal area.