• 수산해양기술연구
• /
• 제37권4호
• /
• pp.257-266
• /
• 2001

경상대학교 해양과학대학의 실습선 새바다호를 사용하여 통영항 내의 동호만에서 1999년 9월 3~4일 사이에 투묘와 양묘를 포함한 선박의 궤적을 PATK-GPS 선간거리계측 시스템을 이용하여 위치와 거리 및 상대방위를 측정하고, 그 측위 정도의 유효성과 묘박의 실시간 가능성에 대하여 분석한 결과를 요약하면 다음과 같다. 1. 투묘 후 묘가 브로트업 앵커가 될 때까지의 시간은 4분이 소요되었고, 완전한 묘박 상태로 되어 선박의 궤적이 나타나기 시작하는데 요하는 시간은 10분 정도였다. 2. 묘박중 선체는 묘를 중심으로 하여 8자형의 요동운동을 나타내었다. 3. 측정 전체 시간대의 평균 묘박위치는 투묘위치로부터 북으로 49m, 동으로 89m로 편향되었다. 4. 선박의 궤적은 묘를 중심으로 하여 상태방위 $186.1^\circ$에서 $194.2^\circ$까지의 $8.1^\circ$ 폭 사이를 장반경 63m, 단반경 53m의 거리로 타원형에 가까운 궤적을 그리고, 반시계 방향으로 이동하는 경향이 있는 것으로 나타났다. 5. 선위의 분포 빈도가 가장 높은 것은 상대방위 $187^\circ$, 거리 558m 지점이었고, 가장 낮은 점은 상대방위 $194^\circ$, 거리 556m의 지점이었다. 6. PRTK-GPS는 거리와 방위를 동시에 측정할 수 있으므로 선박의 묘박에 요구되는 적정한 면적과 주묘의 상태를 연속적으로 정밀하게 파악할 수 있으므로 묘박의 감시에 매우 적절한 시스템이라 판단된다.

• Korean Chemical Engineering Research
• /
• 제58권2호
• /
• pp.280-285
• /
• 2020

We have developed a constitutive display system of the Pseudomonas fluorescens SIK W1 TliA lipase on the cell surface of Escherichia coli using E. coli outer membrane protein C (OmpC) as an anchoring motif, which is an economical compared to induced system. For the constitutive expression of truncated OmpC-TliA fusion proteins, gntT104 promoter was employed. Cell growth was not affected by over expression of fusion protein during entire culture time, suggesting cell lysis was not a problem. The localization of truncated OmpC-TliA fusion protein on the cell surface was confirmed by immunofluorescence microscopy and measuring whole cell lipase activity. Constitutively displayed lipase was very stable, retaining activity enantioselectivity throughout the five repeated reactions. These results suggest that OmpC from E. coli be a useful anchoring motif for displaying enzymes on the cell surface without any inducers, and this stable surface display system can be employed for a broad range of biotechnological applications.

• 대한토목학회논문집
• /
• 제32권4C호
• /
• pp.149-157
• /
• 2012

본 논문에서는 PVD의 설치를 위하여 사용되는 앵커슈에 의한 지반교란과 정착 메커니즘을 연구하기 위하여, 맨드렐-앵커슈의 관입과정과 인발과정을 모사하고, 시각화 할 수 있는 2차원 모형실험 시스템을 개발하였다. 개발된 시스템을 활용하여, 기존 사각판형 앵커슈와 쐐기가 달린 비대칭 앵커슈의 관입과 인발 과정을 모사하는 1g 모형실험과 원심모형실험을 수행하였다. 앵커슈 크기 및 종류에 따라 지반교란과 앵커슈 정착 성능을 확인하기 위해 크기가 다른 기존 사각판형 앵커슈와 쐐기형 비대칭 앵커슈의 설치과정을 모사하였다. 관입과정에서 촬영된 영상을 이미지 분석하여, 앵커슈의 크기 및 형태에 따른 점토의 교란을 시각화하고 분석하였다. 또한, 인발과정 모사를 통하여 앵커슈의 정착 메커니즘을 밝히고 인발시 정착력을 측정하여 정착 성능을 비교하였다. 그 결과, 앵커슈의 크기는 지반교란과 인발저항력 모두에 영향을 미치며, 비대칭 앵커슈가 기존의 앵커슈에 비해 지반교란 및 배수재 정착 성능을 향상시키는 것을 확인하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계학술발표회 논문집(I)
• /
• pp.226-229
• /
• 2006

Strengthening with externally post-tensioned CFRP strips is more effective in increasing load carrying capacity of existing structures as well as reducing crack width and deflection. This study developed concrete embedded anchorages system for externally post-tensioned CFRP strips, and carried out experimental study to verify anchoring performance quantitatively. Through experimental results, anchoring strength of concrete embedded anchorage were quantified into shear strength of anchor bolt, bearing strength of concrete at the front of anchor plate and bond strength between anchor plate and concrete surface. In addition, overall anchoring performances according to combination of each unit force are examined in this study.

• 기술발표회
• /
• 통권2006호
• /
• pp.66-72
• /
• 2006

The ground anchoring has been utilized over 40 years. It is growing the application of the removal ground anchor with tension force for holding earth retaining constructions in the city. It transmits tension stress of prestressed steel wire through grouting to fixed the ground that is of great advantage adjacent ground stability. Nowadays, we can find the compression dispersion anchor on many site. But, it has some problems in behavior of anchors because of impossible to tense p.c strand uniformly under the existing equipment due to different length of p c strand. Hence, motive of this research was to study the application of the newly developed tension system, that analyze and compare with the current anchoring method build on the data of in-site test and laboratory test. As a result, in case of auto back tension system, it became clear that tension pressure was equally distributed among the steal wires but the existing tension system showed sign of instability by indicating stress deflection of about 30% compare with design load. This can cause an ultimate failure of the concentrated p.c strand and a shear failure of ground.

• 해양환경안전학회지
• /
• 제15권1호
• /
• pp.49-55
• /
• 2009

우리나라는 매년 최소 3${\sim}$4개 정도의 태풍의 영향을 받고 있으며, 이러한 태풍은 강한 바람과 많은 비를 동반하여 막대한 재산피해와 인명피해를 가져왔다. 특히, 태풍 매미는 기록적인 강풍과 높은 파도를 동반하여 피항지에 묘박중인 선박들과 부두에 계류중인 선박들이 침몰, 좌초, 충돌하는 등 많은 해양사고를 유발시켰다. 태풍의 내습이 예상되면 선박들은 태풍의 예상 진로에서 멀리 벗어나거나 안전한 피항지를 선택하여 투묘를 실시하고 있다. 하지만, 투묘에 대한 사항이나 투묘 후 선박의 안전에 대한 판단은 운항자의 경험에 의존하고 있는 실정이다. 따라서, 본 논문에서는 실습선 한바다호를 대상으로 선체에 작용하는 외력과 외력에 대한 대항력을 상호 비교 분석함으로써 선박의 묘박 안전성을 정량적으로 평가하였고, 이를 바탕으로 주묘 한계풍속, 선박에서의 안전대책, 단계별 조치사항 등에 대한 묘박 매뉴얼을 개발하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 춘계학술대회 초록집
• /
• pp.87-87
• /
• 2010

Photoelectrochemical (PEC) systems are promising methods of producing H2 gas using solar energy in an aqueous solution. The photoelectrochemical properties of numerous metal oxides have been studied. Among them, the PEC systems based on TiO2 have been extensively studied. However, the drawback of a PEC system with TiO2 is that only ultraviolet (UV) light can be absorbed because of its large band gap (3.2 - 3.4 eV). Two approaches have been introduced in order to use PEC cells in the visible light region. The first method includes doping impurities, such as nitrogen, into TiO2, and this technique has been extensively studied in an attempt to narrow the band gap. In comparison, research on the second method, which includes visible light water splitting in molecular photosystems, has been slow. Mallouk et al. recently developed electrochemical water-splitting cells using the Ru(II) complex as the visible light photosensitizer. the dye-sensitized PEC cell consisted of a dye-sensitized TiO2 layer, a Pt counter electrode, and an aqueous solution between them. Under a visible light (< 3 eV) illumination, only the dye molecule absorbed the light and became excited because TiO2 had the wide band gap. The light absorption of the dye was followed by the transfer of an electron from the excited state (S*) of the dye to the conduction band (CB) of TiO2 and its subsequent transfer to the transparent conducting oxide (TCO). The electrons moved through the wire to the Pt, where the water reduction (or H2 evolution) occurred. The oxidized dye molecules caused the water oxidation because their HOMO level was below the H2O/O2 level. Organic dyes have been developed as metal-free alternatives to the Ru(II) complexes because of their tunable optical and electronic properties and low-cost manufacturing. Recently, organic dye molecules containing multi-branched, multi-anchoring groups have received a great deal of interest. In this work, tri-branched tri-anchoring organic dyes (Dye 2) were designed and applied to visible light water-splitting cells based on dye-sensitized TiO2 electrodes. Dye 2 had a molecular structure containing one donor (D) and three acceptor (A) groups, and each ended with an anchoring functionality. In comparison, mono-anchoring dyes (Dye 1) were also synthesized. The PEC response of the Dye 2-sensitized TiO2 film was much better than the Dye 1-sensitized or unsensitized TiO2 films.

• 한국해양공학회지
• /
• 제35권4호
• /
• pp.305-312
• /
• 2021

There is a gradual increase in the need for energy charging in marine environments because of energy limitations experienced by electric ships and marine robots. Buoys are considered potential energy charging systems, but there are several challenges, which include the need to maintain a fixed position and avoid hazards, dock with ships and robots in order to charge them, be robust to actions by birds, ships, and robots. To solve these problems, this study proposes a smart buoy robot that has multiple thrusters, multiple docking and charging parts, a bird spike, a radar reflector, a light, a camera, and an anchor, and its mechanism is developed. To verify the performance of the smart buoy robot, the position control under disturbance due to wave currents and functional tests such as docking, charging, lighting, and anchoring are performed. Experimental results show that the smart buoy robot can operate under disturbances and is functionally effective. Therefore, the smart buoy robot is suitable as an energy charging system and has potential in realistic applications.

• Journal of Microbiology and Biotechnology
• /
• 제15권1호
• /
• pp.141-146
• /
• 2005

A new system for displaying proteins on the surface of Escherichia coli was developed using the Salmonella typhimurium outer membrane protein C (OmpC) as an anchoring motif. The C-terminal deletionfusion strategy was developed to fuse the polyhistidine peptides and green fluorescent protein (GFP) to the Cterminal of the truncated functional portion of OmpC. The polyhistidine peptides of up to 243 amino acids could besuccessfully displayed on the E. coli cell surface, which allowed recombinant E. coli to adsorb up to 34.2 μmol of Cd2+ per gram dry cell weight. The GFP could also be successfully displayed on the E. coli cell surface. These results suggest that the C-terminal deletion-fusion strategy employing the S. typhimurium OmpC as an anchoring motif provides a new efficient way for the display of large proteins on the surface of E. coli.

• 한국수소및신에너지학회논문집
• /
• 제33권1호
• /
• pp.105-112
• /
• 2022

Copper (Cu)-based catalysts have been widely used in a methanol steam reforming (MSR) reaction for hydrogen production for air-independent propulsion (AIP) applications and their good catalytic activities have attracted much attention. However, the agglomeration of the catalytic active site Cu causes deteriorating the catalytic performance and suppression of Cu agglomeration is a crucial issue in the AIP applications that the MSR system is typically operated at 250-300℃ for a long time. R. Sakai et al. recently showed a computational study on the anchoring effect that reduces an agglomeration of active sites by doping in a supporter. In order to present the anchoring effect on 𝛾-Al₂O₃ supported Cu-based catalysts, in this study, the adsorption energies of Cu on X-doped (X=ruthenium, phosphorus, silicon) 𝛾-Al₂O₃ were calculated and Cu adsorption energy decreased due to a change of the electronic structure originated from doping, thereby proving the anchoring effect.