• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.44 no.2
• /
• pp.67-73
• /
• 2012

Structural stability and shock absorption are important properties for corrugated board. In order to maintain structural stability, adhesive properties between top/bottom liners and corrugated medium are not only essential but also important for productivity and product quality. Borax has been an essential ingredient in corrugating adhesive solution. Borax increases viscosity, bonding between starchs and green adhesive bond. The objective of this research is to improving adhesive strength and viscosity stability by adding cross-linking agent instead of borax. Rheology and penetration of main starch gelatinization slurry were affected by borax addition level. Borax increased viscosity and decreased viscosity stability, while cross-linking additives increased viscosity stability and adhesive strength by anchoring effect.

• 한국HCI학회:학술대회논문집
• /
• 2008.02b
• /
• pp.475-481
• /
• 2008

본 연구는 어떤 사건에 대한 예측 정확성 여부와 기억을 회상할 때의 정서 상태가 후견지명 편향 (hindsight bias)에 미치는 영향을 알아보고자 하였다. 이에 valence 축에 따라 긍정적 정서와 부정적 정서를 일으키는 두 가지 음악을 제시하고 두 조건에 대하여 기억에 대한 과잉 확신이 얼마나 달라지는가를 분석하였다. 예측 정확성 여부에 대해서는 실험 결과 데이터 중 예측 일치 조건과 불일치 조건으로 나누어 후견지명 편향에 끼치는 영향과 정서와의 상호작용이 있는가를 분석하였다. 사람들은 예측과 반대되는 결과를 접했을 때 결과에 anchoring하여 기억을 회상하려는 편향이 더욱 커졌으며 부정적인 정서보다 긍정적 정서 상태일 때 후견지명 편향이 더욱 커졌음을 밝혔다. 특히 예측과 상이한 결과 피드백을 받고 긍정적 정서 상태일 때 가장 많은 왜곡 현상을 보였으며, 예측 불일치/ 부정적 정서 조건, 예측 일치/ 긍정적 정서 조건, 예측 일치/ 부정적 정서 조건 순으로 후견지명 편향을 보였다. 이 결과는 정서 상태보다 어떤 사건에 대한 예측 정확성 여부가 후견지명 편향에 더 큰 영향을 준다는 것을 시사한다. 본 연구의 실험실 상황을 통하여 자기와 관련이 없는 중립적 과제를 통해서도 후견지명 편향이 나타남을 알 수 있었다. 특히 그 동안 거의 이루어지지 않았던 정서와 후견지명 편향의 관계를 밝히고, 기존의 예측 정확성에 따른 편향을 설명하는 모델간 논쟁이 많았으나 실험 결과가 motivational model을 지지함을 밝혔음에 의의가 있다.

• Annual Conference on Human and Language Technology
• /
• 2001.10d
• /
• pp.226-232
• /
• 2001

본 연구는 결속장치(cohesive devices)가 과학텍스트의 읽기 속도와 내용 이해에 끼치는 영향에 대해 연구하였다. 연구의 목적을 위한 실험을 통해서 먼저, 텍스트의 문단별 읽기 시간을 측정하여 온라인 처리 과정을 검토하였고, 둘째, 회상과 재인 검사를 실시하여 오프라인 상태에서의 이해도를 조사하였다. 이 연구의 재료로 사용된 텍스트는 번개 생성과정에 대한 과학텍스트로서, 반복, 지시사, 정박(anchoring), 인과적 접속사 등의 결속장치를 이용하여 응집성(coherence)의 강도를 높고, 낮게 조작하였다. 실험 결과, 결속장치가 길속장치의 종류와 지엽적 응집성의 강도에 따라 과학텍스트 읽기와 이해에 선택적으로 영향을 끼친다는 것을 발견하였다. 첫째, 인과적 접속사는 읽기 시간에는 영향을 주지 않는 반면, 이해를 촉진했는데, 이 긍정적 효과는 과제의 종류에 따라 다르게 나타났다. 즉, 회상 검사 결과에서는 인과적 접속사가 쓰인 모든 문단에서 유의한 차이가 나타났으나, 재인 검사에서는 유의한 차이가 부분적으로만 나타났다. 둘째, 반복 결속장치는 다른 결속장치와 같이 발생할 경우에만 읽기 시간과 이해를 부분적으로 촉진하는 것으로 나타났다. 셋째. 정박 결속장치의 영향은 읽기와 이해 두 처리 과정에 모두 선택적으로 영향을 준 것으로 나타났다. 인과적 접속사와 함께 쓰인 문단의 경우에는 회상 검사에서만, 반복 결속장치가 함께 쓰인 문단에서는 회상, 재인 검사에서 모두 긍정적 영향을 준 것으로 관찰되었다.

• Carbon letters
• /
• v.15 no.2
• /
• pp.77-88
• /
• 2014

Double walled carbon nanotubes (DWCNTs) are considered an ideal model for studying the coupling interactions between different concentric shells in multi-walled CNTs. Due to their intrinsic coaxial structures they are mechanically, thermally, and structurally more stable than single walled CNTs. Geometrically, owing to the buffer-like function of the outer tubes in DWCNTs, the inner tubes exhibit exciting transport and optical properties that lend them promise in the fabrication of field-effect transistors, stable field emitters, and lithium ion batteries. In addition, by utilizing the outer tube chemistry, DWCNTs can be useful for anchoring semiconducting quantum dots and also as effective multifunctional fillers in producing tough, conductive transparent polymer films. The inner tubes meanwhile preserve their excitonic transitions. This article reviews the synthesis of DWCNTs, their electronic structure, transport, and mechanical properties, and their potential uses.

• BMB Reports
• /
• v.38 no.4
• /
• pp.407-413
• /
• 2005

Calcium and zinc binding protein, calprotectin is a multifunctional protein with broad spectrum antimicrobial and antitumoural activity. It was purified from human neutrophil, using a two-step ion exchange chromatography. Since surface hydrophobicity of calprotectin may be important in membrane anchoring, membrane penetration, subunits oligomerization and some biological roles of protein, in this study attempted to explore the effect of calcium in physiological range on the calprotectin lipophilicity. Incubation of human calprotectin ($50\;{\mu}g/ml$) with different calcium concentrations showed that 1-anilino-8-naphthalene sulfonic acid (ANS) fluorescence intensity of the protein significantly elevates with calcium in a dose dependent manner, suggesting an increase in calprotectin surface hydrophobicity upon calcium binding. Our study also indicates that calcium at higher concentrations (6, 8 and 10 mM) induces aggregation of human calprotectin. Our finding demonstrates that the starting time and the rate constant of calprotectin aggregation depend on the calcium concentration.

• Journal of Information Science Theory and Practice
• /
• v.8 no.2
• /
• pp.18-31
• /
• 2020

Cognitive biases can influence human information behaviour and decisions made in information behaviour and use. This study aims to identify the biases involved in some aspects of information behaviour and the role they play in information behaviour and use. Twenty-five semi-structured face-to-face interviews were conducted in an exploratory qualitative study with graduate (MA and PhD) students who were at the stage of their dissertation/thesis research. Eisenberg & Berkowitz Big6^TM Skills for Information Literacy was adopted as a framework for interviews and the analysis was done using grounded theory coding method. The findings revealed the presence of twenty-eight biases in different stages of information behaviour, including availability bias (affects the preference for information seeking strategies), attentional bias (leads to biased attention to some information), anchoring effect (persuades users to anchor in special parts of information), confirmation bias (increases the tendency to use information that supports one's beliefs), and choice-supportive bias (results in confidence in information seeking processes). All stages of information seeking were influenced by some biases. Biases might result in a lack of clarity in defining the information needs, failure in looking for the right information, misinterpretation of information, and might also influence the way information is presented.

• Journal of the Korean institute of surface engineering
• /
• v.32 no.6
• /
• pp.709-716
• /
• 1999

Ceramic is select for an alternative substrate material for high-speed circuits due to its low-thermal expansion. As, in this study, ceramic was prepared by ISG (interlayer sol-gel) process using metal salts and a metal alkoxide as the starting materials. Generally ceramic substrate is used electroless copper plating for the metallization. But it has been indicate weakely the adhesion strength between the substrate and copper layer. Therefore, this research, using the ISG process on the preparation of homogeneous and possible preparation at law temperature fabricated sol solution. Using of the dip coating method was coated for the purpose of giving the anchoring effect on the coating layer and enhancing the adhesion strength between the $Al_2$O$_3$ substrate and copper layer. This study examined primary the characteristic of the sol making condition and differential thermal analysis (DTA) X-ray diffraction (XRD) were mearsured to identify the crystal phase of heat treatment specimens. The morphology of the coated films were studied by scanning electron microscopy(SEM). As a resurt, XRD analysis was obtained patterns of $\alpha$-cordierite after heat-treatment about 2 hours at $1000^{\circ}C$. SEM analysis could have seen a large number of voids on coated film. The more contants of$ Al_2$$O_3$ Wt% was increased the more voids was advanced. Peel adhesion strength has a maximum in the contants of the TEOS:ANE of 1:0.7 mole%. In this case, adhesion strength has been measured 1150gf, peel adhesion strength were about 10 times more than uncoated of the ceramics film.

• Transactions on Electrical and Electronic Materials
• /
• v.8 no.6
• /
• pp.246-249
• /
• 2007

A triple-band antenna was developed and fabricated by LDS(Laser Direct Structuring) process. The effects of the plating rate and heat treatment condition were investigated and the gains of fabricated antennas were measured at various frequencies. The laser irradiated surface shows clearly that there are prominence and depression. It shows anchoring effect between a plating material and ablation surface. The plating rate was decreased when the plating material is exhausted in the solution. This solution needs to refreshed by the new aid solution. The copper plating thickness is decreased with the increase of heat treatment temperature in the same time but it does not change other condition. The gain of LDS antenna showed higher than the generally processed antenna. This result was related with practical use of the dimension and effective dielectric constant.

• Journal of the Korean institute of surface engineering
• /
• v.41 no.1
• /
• pp.33-37
• /
• 2008

Polycarbonate has a high transmittance to light, low specific gravity, flexibility and cost-effectiveness that extends the application field of the polymer to bio-engineering, optics, electronic parts, etc. Moreover, electro plating of metallic film on PC could endow the parts the electromagnetic interference shielding capability. However, poor adhesion of copper on PC limited the wide usage in the industry. In this work, a composite(PC/ABS) and MmSH(Momentary mold Surface Heating) injection process were used to improve the plating characteristics; plating thickness, gloss and adhesion. Also plasma treatment and chemical treatment were employed for improving adhesion. Plating characteristics on PC/ABS were better than those on PC due to the anchoring effect of butadiene. MmSH injection process could ameliorate the gloss and coating adhesion. Also plating thickness and adhesion of PC and PC/ABS were increased by plasma treatment.

• Advances in Computational Design
• /
• v.4 no.3
• /
• pp.295-305
• /
• 2019

The sealing cement of total hip arthroplasty is the most widely used binder in orthopedic surgery for anchoring implants to their recipient bones. Nevertheless, this latter remains a fragile material with weak mechanical properties. Inside this material cracks initiate from cavities. These cracks propagate under the effect of fatigue and lead to the failure of this binder and consequently the loosening of the prosthesis. In this context, this work consists to predict the position of cracks initiation and their propagations path using the Extended Finite Element Method (XFEM). The results show that cracks can only be initiated from a sharp edges of an ellipsoidal cavity which the ratio of the minor axis over the major axis is equal to 0.1. A maximum crack length of 19 ?m found for a cavity situated in the proximal zone position under a static loading. All cracks propagate in same(almost) way regardless of the cavity(site of initiation) position and its inclination in the proximal zone.