• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.28 no.6
• /
• pp.691-697
• /
• 2015

In this paper, an embedded EM sensor was researched to estimate prestressing force of PS tendon in PSC girder. Recent methodologies for managing prestressing force loss were staying on verifying a applying prestressing force under construction, namely the loss management can not be controlled after construction. To estimate the tensile force of PS tendon during lifetime of PSC girder, this research proposed a bobbin-type embedded EM sensor that can be embedded in PSC girder is designed and fabricated considering the shape properties of anchorage zone and sheath. To verify the proposed sensor, a small PSC girder test was performed. The embedded EM sensor was connected to a sheath and anchor block, and the concrete was poured. After curing, the change of the permeability of PS tendon under tensile forces of 200, 710, 1070, 1300kN was measured using embedded EM sensor. The permeability of PS tendon had decreased according to the increment of applied tensile force. Also it is confirmed that the change of permeability due to applied tensile force could resolve the applied tensile force values. As a result, proposed embedded EM sensor could be embed into the PSC girder and it could be used to estimate the tensile force variation during lifetime of PSC girder.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2002.05a
• /
• pp.787-792
• /
• 2002

The voided slab have many advantages, light weight, high load-distribution capacity, low cost and beautiful appearance, etc. But they have also many cracks due to difficulties in designs and construction, analysis, shrinkage, installation and rising force of voided tube. This paper presents the retrofit effects with steel plate(SP)/carbon fiber sheet(CFS) of RC voided slab. As a results of this study, it proved that the strip pattern has to be profitable than full-face pattern in performance such as crack, ultimate loads, stiffness. Retrofit length has many influence on retrofit effects, as the length increases, performance and stability of end blocks higher. Also, it proved that the retrofit on full-section has to be profitable than voided-section in performance, and the overlay length of CFS is desirable to extent approximately and welding(V-cut) has to be efficient than anchors in SP connection. But the kinds of end block and anchor has not influence on retrofit effects.

• 한국가스학회:학술대회논문집
• /
• 2001.10a
• /
• pp.35-44
• /
• 2001

Analytical and experimental studies have been performed to investigate the strength of the membrane and the reaction force at the anchor point. Using nonlinear FEM code and experiments, the stress analysis of the corrugated membrane related the cryogenic liquid pressure and thermal loading is performed to ensure the stability and fatigue strength of the membrane. This paper reports on the FEM results of membrane.

• Proceedings of the Korean Information Science Society Conference
• /
• 2008.06d
• /
• pp.141-144
• /
• 2008

기존의 네트워크 환경에 이동성을 지원하기 위하여 Internet Engineering Task Force (IETF)에서는 Mobile IP(MIP)와 Mobile IPv6 (MIPv6)를 순차적으로 제안하였다. 그러나 MIP나 MIPv6는 유저가 요구하는 이동성을 지원하기에 많은 문제점을 나타내었고 이런 문제를 해결하기위해 Hierarchical MIPv6(HMIPv6)를 제안하였다. HMIPv6는 Home Agent (HA)를 향한 Binding Update (BU)를 줄이기 위해 Mobility Anchor Point (MAP) 라는 새로운 개념을 제안했다. 그러나 HMIPv6 역시 이동노드가 빠르게 이동하는 환경에서는 잦은 MAP BU로 인해 큰 오버헤드가 발생하는 문제점이 나타났다. 본 논문에서는 HMIPv6 환경에서 노드가 빠르게 이동할 때 발생하는 불필요한 MAP BU를 줄이기 위한 선택적 MAP 등록 기법을 제안한다. 이 기법은 기존에 제안되었던 계층적인 MAP 선택 기법들과는 다르게 상황에 따라 불필요한 MAP BU를 회피하는데서 차별성을 갖는다. 또한 OPNET을 이용한 시뮬레이션을 통해 기존의 HMIPv6에 비해 제안된 기법의 성능을 비교한다.

• Journal of the Korean Institute of Gas
• /
• v.6 no.4 s.18
• /
• pp.47-52
• /
• 2002

Analytical studies have been performed to investigate the strength of the membrane and the reaction force at the anchor point. Using nonlinear FEM code and experiments, the stress analysis of the corrugated membrane related the cryogenic liquid pressure and thermal loading is performed to ensure the stability and fatigue strength of the membrane. This paper reports on the FEM results of membrane.

• Proceedings of the KSME Conference
• /
• 2001.06a
• /
• pp.907-912
• /
• 2001

KOGAS had developed the Ring-knot membrane for LNG storage tank. But we found that some modifications were needed in using the Ring-knot membrane for the commercial LNG storage tanks. So, both analytical and experimental studies have been performed to investigate the strength of the new membrane and the reaction force at the anchor point. Using nonlinear FEM code and experiments, the stress analysis of the new corrugated membrane shapes subject to the cryogenic liquid pressure and thermal loading are performed to ensure the stability and fatigue strength of the new membrane. This paper reports on the results of investigations into this new type of membrane.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2003.11b
• /
• pp.899-902
• /
• 2003

무선 환경에서의 실시간 서비스의 확대와 노드의 이동성 증가에 따라 handover 시 발생되는 패킷 손실과 지연으로 인한 실시간 서비스의 중단이 해결해야 할 중요한 문제점이 되고 있다. 본 논문에서는 IETF (Internet Engineering Task Force)의 중요한 마이크로 이동성 프로토콜인 HMIPv6의 기본 동작을 설명하고, 여전히 문제점으로 남아있는 Inter-MAP (Mobility Anchor Point) handover의 성능을 향상시키기 위한 Dynamic MAP Switching handover 알고리듬을 제안한다. 제안한 알고리듬은 인접한 MAP 도메인을 중첩되게 설정하고 Inter-MAP handover가 발생되기 전에 미리 MAP을 switching한다. 따라서 Inter-MAP handover가 발생하지 않도록 함으로써 handover 시 발생하는 데이터의 손실 및 지연을 감소시킬 수 있다. 제안된 알고리듬의 성능 향상은 산술적 분석을 통하여 검증한다.

• 기술발표회
• /
• s.2006
• /
• pp.35-44
• /
• 2006

Supporting method of a Temporary retaining wall for underground excavation project are adopted by systems of strut, anchor, nail, raker, etc. Strut system and Raker system of these methods are mostly used preloading jack to minimize deformations of retaining wall. We determinate efficient preloading to analysis these strut-preloadings, deformations of retaining wall, axial forces, and etc.. This study is analysed that preloading applied 0%, 10%, 20%, 30%, ...., 100% for strut and raker installed by CIP temporary retaining wall. This study results that adequate preloadings were determined to analysis correlations of preloading, deformations of wall, maximum bending moment, axial force of strut, and displacement of surrounding.

• Proceedings of the Korean Information Science Society Conference
• /
• 2004.10c
• /
• pp.328-330
• /
• 2004

차세대 네트워크는 IP 기반의 무선 네트워크로 진화하고 있다. 이에따라 최근의 internet Engineering Task force (IETF)에서 효율적인 이동성 관리를 위한 Hierarchical Mobile IPv6 (HMIPV6)을 제안하였다. HMIPV6는 Mobile Anchor Point(MAP)영역안에 지역 등록을 통하여 상당한 시그널링을 줄일 수 있고 핸드 오프 지연시간을 줄이면서 MIPv6의 성능을 향상 가져왔다. 그러나 MAP 영역이 고정되어 있고 단일 MAP에 집중적인 트랙픽이 발생하는 문제점을 가지고 있다. 따라서 이동노드의 이동성 및 트래픽에 의해서 동적으로 MAP 영역을 설정함으로써 트랙픽이 분산되어 질수 있다. 또한 HMIPv6는 Idle 이동노드도 불필요한 위치 등록으로 인하여 시그널링 오버헤드를 방생한다. 따라서 IP 페이징 기법을 사용하여 불필요한 위치 등록에 따른 시그널링을 줄이기 위한 방법을 제시한다. 또한 explicit multicast (Xcast) 방법을 사용하여 효율적인 메시지 전달방법을 제시한다.

• Proceedings of the KSR Conference
• /
• 2006.11b
• /
• pp.565-580
• /
• 2006

Set in constant increase and period current of lively technical development of railroad use and construction of cable stayed bridge railway bridge, one of bridge form of most suitable that think side police officer and the material enemy of bridge that use long rail, is increasing laying stress on the foreign countries. Main tower fixing department of this cable stayed bridge is consisted of main tower flange that support bearing plate, bay ring plate bearing plate, support end rib and diaphragm etc, as stress transmission mechanic that tensility of cable socket into normal force of main tower, and is used this time. These structural elements is very complex the structure and direction of load delivered from socket specially calbe particularly be different, and need FEM analysis that use Thick Shell element for suitable arrangement of mutual stress flowing grasping and absence that follow hereupon because all of the each support plate angle that suport this differ.