• 한국시뮬레이션학회:학술대회논문집
• /
• 한국시뮬레이션학회 1997년도 춘계 학술대회 발표집
• /
• pp.3-7
• /
• 1997

Simulation is commonly used to find the best values of decision variables for problems which defy analytical solutions. "Simulation Optimization" technique is used to optimize the expressed in analytical of mathematical models. In this research, we will study Reverse-Simulation optimization method which is quite different from current simulation optimization methods in literature. We will focus on the on-line determination of steady-state method which is very important issue in Reverse-Simulation optimization, and the construction of Reverse-Simulation algorithm with expert systems. Especially, in the case of multiple objectives because of the dependency of simulation model, all objectives do not satisfied simulataneously. In this paper, therefore, we process simulation optimization using objectives with priority to optimize multiple objectives under single run.ingle run.

• Journal of Electrical Engineering and Technology
• /
• 제8권6호
• /
• pp.1481-1486
• /
• 2013

In this paper, a new two dimensional (2D) analytical model of a Dual Material Gate tunnel field effect transistor (DMG TFET) is presented. The parabolic approximation technique is used to solve the 2-D Poisson equation with suitable boundary conditions. The simple and accurate analytical expressions for surface potential and electric field are derived. The electric field distribution can be used to calculate the tunneling generation rate and numerically extract tunneling current. The results show a significant improvement of on-current and reduction in short channel effects. Effectiveness of the proposed method has been confirmed by comparing the analytical results with the TCAD simulation results.

• 한국시뮬레이션학회논문지
• /
• 제7권2호
• /
• pp.63-78
• /
• 1998

The hierarchical cell structure consists of the macrocell and microcells to increase the system capacity and to achieve broad coverage. The hierarchical cell structure provides services for users in different mobility. In this paper, an analytical queueing model in mobile networks is proposed for the performance evaluation of the hierarchical cell structure. The model for networks with the multiple levels can simplify multi-dimensional ones into one-dimensional queueing model. The computational advantage will be growing as the layers are constructed in multiple levels. The computer simulation is provided for validating the proposed analytical model.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제54권11호
• /
• pp.533-539
• /
• 2005

In the previous work, we performed the analysis of a tubular type moving-magnet linear oscillatory actuator (LOA) with cylindrical Halbach array by using 2-d analytical formulas and confirmed validity of analytical results by comparison of those with both finite element (FE) computation and experimental results. This paper deals with the dynamic characteristic analysis of the moving-magnet LOA with cylindrical Halbach array. Control parameters such as the thrust constant, the back-emf constant, resistance and inductance are obtained from both analytical and experimental results. And then, the dynamic simulation algorithm is established by the state and output equation obtained from voltage and motion equation. Finally, for various values of frequency, the dynamic simulation and experimental results for the characteristics of the voltage, current and displacement of moving-magnet LOA are presented. The simulation results are validated extensively by experiments. The experimental and simulation results for the variation of stroke according to control voltage are also presented for various values of frequency.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2010년 춘계학술대회논문집
• /
• pp.517-523
• /
• 2010

Recently, the rapid evolution of computational fluid dynamics (CFD) has enabled its key role in industries and predictive sciences. From diverse research disciplines, however, are there strong needs for integrated analytical tools for multi-phenomena beyond simple flow simulation. Based on the concurrent simulation of multi-dynamics, multi-phenomena beyond simple flow simulation. Based on the concurrent simulation of multi-dynamics, multi-physics and multi-scale phenomena, the multi-phenomena CFD technology enables us to perform the flow simulation for integrated and complex systems. From the multi-phenomena CFD analysis, the high-precision analytical and predictive capacity can enhance the fast development of industrial technologies. It is also expected to further enhance the applicability of the simulation technique to medical and bio technology, new and renewable energy, nanotechnology, and scientific computing, among others.

• 대한전자공학회논문지SD
• /
• 제40권6호
• /
• pp.379-383
• /
• 2003

Double-Gate MOSFET의 TSi변화에 따른 subthreshold 특성을 비교 분석하였다. Lightly-doped asymmetrical 소자의 경우에 symmetrical 소자에 비하여 subthreshold current가 TSi에 따라 급격하게 증가하는 현상을 발견하였으며 이는 낮은 depletion charge 때문에 TSi내의 전압분포가 linear한 특성을 갖는 것에 기인함을 밝혔다. 또한 이러한 현상을 설명할 수 있는 analytical equation을 유도하였으며 analytical equation 결과와 device simulation 결과를 비교하여 그 정확도를 검증하였다.

• 전기학회논문지
• /
• 제59권2호
• /
• pp.318-327
• /
• 2010

This paper deals with analysis on dynamic characteristic and circuit parameter of linear switched reluctance motor by electromagnetic analytical method. Above all, using space harmonic method, which is electromagnetic method, the air-gap flux density is analyzed in the both align and unaign positions, and the inductance profile, force characteristic and resistance per phase are calculated by means of the process. The validity of the analyzed results are demonstrated by the finite element method(FEM) and manufacture of the prototype machine. Second, the dynamic simulation is analyzed by the use of circuit parameters derived from analytical method, and the operating system of the prototype machine is manufactured to demonstrated the validity of simulation analysis. As a result, it is considered that the characteristic equation suggested in this paper will contribute to the design, analysis and application of LSRM.

• Ocean Systems Engineering
• /
• 제5권4호
• /
• pp.279-299
• /
• 2015

Suction anchors are widely adopted and play an important role in mooring systems. However, how to reliably predict the failure mode and ultimate pullout capacity of the anchor in sand, especially by an easy-to-use theoretical method, is still a great challenge. Existing methods for predicting the inclined pullout capacity of suction anchors in sand are mainly based on experiments or finite element analysis. In the present work, based on a rational mechanical model for suction anchors and the failure mechanism of the anchor in the seabed, an analytical model is developed which can predict the failure mode and ultimate pullout capacity of suction anchors in sand under inclined loading. Detailed parametric analysis is performed to explore the effects of different parameters on the failure mode and ultimate pullout capacity of the anchor. To examine the present model, the results from experiments and finite element analysis are employed to compare with the theoretical predictions, and a general agreement is obtained. An analytical method that can evaluate the optimal position of the attachment point is also proposed in the present study. The present work demonstrates that the failure mode and pullout capacity of suction anchors in sand can be easily and reasonably predicted by the theoretical model, which might be a useful supplement to the experimental and numerical methods in analyzing the behavior of suction anchors.

• Korea-Australia Rheology Journal
• /
• 제13권3호
• /
• pp.131-139
• /
• 2001

A coupled approach is proposed for the prediction of sheet profile in sheet casting process, which combines one-dimensional analytical method on planar elongational flow region and three-dimensional numerical method on the other region. The strategy is constructed from the observations that the flow domain of sheet casting process can be separated into two parts based old the flow kinematics. The flow field in the central region of sheet, over which the planar elongational flow dominates, is possibly replaced by one-dimensional analytical solution. Then only a partial flow domain near the edge region of sheet, where the flow kinematics cannot be described by the planar elongational flow itself, requires three-dimensional numerical simulation. Good agreement is observed between the coupled approach developed in this study and the full three-dimensional numerical simulation previously developed and reported by the authors. This coupled approach may have provided flexibility with low costs to accommodate a wide range of die sizes in sheet casting process.

• 한국시뮬레이션학회논문지
• /
• 제10권3호
• /
• pp.83-94
• /
• 2001

In this paper, the consumable spare parts requirement determination problem of newly procured equipment systems is considered. The problem is formulated as the cost minimization problem with operational availability constraint. Assuming part failure rate is constant during operational period, an analytical method is developed to obtain spare part requirements. Since this solution tends to overestimate the requirements, a fast search simulation procedure is introduced to adjust it to the realistic solution. The analytical solution procedure and the simulation procedure are performed recursively until a near optimal solution is achieved. The experimental results show that the near optimal solution is approached in a fairly short amount of time.