• Steel and Composite Structures
• /
• v.25 no.1
• /
• pp.117-126
• /
• 2017

The component method is an analytical approach for investigating the moment-rotation relationship of steel connections. In this study, the component method was improved from two aspects: (i) load analysis of mechanical model; and (ii) combination of spring elements. An optimized component method with more reasonable component models, spring arrangement position, and boundary conditions was developed using finite element analysis. An experimental testing program in two major-axis and two minor-axis connections under symmetrically loading was carried out to verify this method. The initial rotational stiffness obtained from the optimized component method was consistent with the experimental results. It can be concluded that (i) The coupling stiffness between column and beam flanges significantly affects the effective height of the tensile-column web. (ii) The mechanical properties of the bending components were obtained using an equivalent t-stub model considering the bending capacity of bolts. (iii) Using the optimized mechanical components, the initial rotational stiffness was accurately calculated using the spring system. (iv) The characteristics of moment-rotation relationship for beam to column connections were effectively expressed by the SPRING element analysis model using ABAQUS. The calculations are simpler, and the results are accurate.

• Journal of Communications and Networks
• /
• v.5 no.1
• /
• pp.73-81
• /
• 2003

The controlled load service defined within the IETF's Integrated Services architecture for quality-of-service (QoS) in the Internet requires source nodes to regulate their traffic while the network, in combination with an admission control strategy, provides a guarantee of performance equivalent to that achieved in a lightly loaded network. Packets sent in violation of the traffic contract are marked so that the network may assign them a lower priority in the use of bandwidth and buffer resources. In this paper, we define the requirements of a scheduler serving packets belonging to the controlled load service and present a novel scheduler that exactly achieves these requirements. In this set of requirements, besides efficiency and throughput, we include an additional important requirement to bound the additional delay of unmarked packets caused due to the transmission of marked packets while dropping as few marked packets as possible. Without such a bound, unmarked packets that are in compliance with the traffic contract are not likely to experience delays consistent with that in al lightly loaded network. For any given desired bound ${\alpha}$ on this additional delay, we present the CL(${\alpha}$) scheduler which achieves the bound while also achieving a per-packet work complexity of O(1) with respect to the number of flows. We provide an analytical proof of these properties of the CL(${\alpha}$) scheduler, and we also verify this with simulation using real traces of video traffic. The scheduler presented here may be readily adapted for use in scheduling flows with multi-level priorities such as in some real-time video streams, as well as in other emerging service models of the Internet that mark packets to identify drop precedences.

• 한국연소학회:학술대회논문집
• /
• 2013.06a
• /
• pp.61-64
• /
• 2013

Biomass is well known for organic resources photosynthesized by carbon dioxide water in the air and thus it can be widely used in the form of energy and production for various kinds of materials. Through pyrolysis, biomass can be transformed into solid(biochar), liquid(bio-oil), and combustible gas on the different condition of temperature and heating rate. That's why biomass can be practically used to preprocess and produce a variety of elements. This work is to analyze the characteristics of slow pyrolysis of three different kinds of biomass extracted from Indonesia. They showed similar moisture content and combinations of combustible matters and had quite a large discrepancy in the ash among them like 2.1 & of Bagasse, 91% of PKS, and 20.9% of Paddy Straw, respectively. yield of biochar, solid form of the biomass, steadily decreased when the temperature went up and that of bio-oil the highest at the temperature of 500 degrees Celsius. At the same temperature range, PKS bio-oil showed 51.4 % of yield and Bagasse had 55.1% while it turned out that Paddy straw showed the lowest yield of 37.2%. The apparent density was also measured to figure out the density of each product from the pyrolysis experiments at the temperature of 500 degrees Celsius. The result was like these; the density of biochar was 0.17, the lowest, and that of Tree stem was 1.3 when mixed by an equal amount of biochar and bio-oil.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.397-397
• /
• 2010

Bone is considered as hierarchically organized biocomposites of organic (collagen) and inorganic (hydroxyapatite) materials. The precise structural dependence between hydroxyapatite (HAp, $Ca_{10}(PO_4)_6(OH)_2)$ crystals and collagen fibril is critical to unique characteristics of bone. To meet those conditions and obtain optimal properties, it is essential to understand and control the initial growth mechanisms of hydroxyapatite at the molecular level, such as other nano-structured materials. In this study, collagen fibrils were prepared by adsorbing native type I collagen molecules onto hydrophobic surface. Hydrophobicity was introduced on the Si wafer surface by using PECVD (plasma enhanced chemical vapor deposition) method and cyclohexane as a precursor. Biomimetic nucleation and growth of HAp on the self-assembled collagen nanofibrils were occurred through incubation of the sample in SBF (simulated body fluid). Chemical and morphological evolution of HAp nanocrystals was investigated by surface-sensitive analytical techniques such as ToF-SIMS (Time-of-Flight Secondary Ion Mass Spectrometry) and AFM (Atomic Force Microscopy) in the early growth stages (< 24 hrs). The very initial stages (< 12 hrs) of mineralization could be clearly demonstrated by ToF-SIMS chemical mapping of surface. In addition to ToF-SIMS and AFM measurement, scanning electron microscopy, energy dispersive spectroscopy and X-ray diffraction analysis were conducted to characterize the HAp layer in the late stages. This study is of great importance in the growth of real bone-like materials with a structure analogous to that of natural bones and the development of biomimetic nanomaterials.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.23 no.7
• /
• pp.585-596
• /
• 2013

This study introduces a hybrid approach combining numerical results with pre-developed analytical calculations for the sound radiation from the modal vibration of a thick, finite length cylinder with various boundary conditions. Structural vibrations of the cylinder are numerically investigated with the finite element method, and distributions of vibratory displacements on the cylinder surface are idealized as simple mathematical expressions based on the numerical results. Sound radiations from the normal vibration of the cylinder are calculated based on idealized modal displacements using a previously introduced theoretical solution. The results are confirmed with numerical analyses using the boundary element method. Based on these results, it can be concluded that the solutions suggested in this study have good accuracies in calculating the vibro-acoustic properties of a thick, finite cylinder with various boundary conditions. Also, the sound radiation characteristics of many practical components such as brake drums and motor housings are expected to be investigated using the procedure proposed in this study.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.32 no.5
• /
• pp.469-483
• /
• 2012

The propagation characteristics of a mechanical wave in human soft tissue depend on its elastic properties. Investigation of these propagation characteristics is of paramount importance because it may enable us to diagnose cancer or tumor from the vibration response of the tissue. This paper investigates and compares displacement patterns generated in soft tissue due to several forms of low-frequency vibration sources placed on a surface. Among vibration sources considered are a normal load, tangential load, and antiplane shear load. We derive analytical expressions for displacements in viscoelastic single layers, and calculate displacement patterns in half space and infinite plate type tissue. Also, we simulate the vibration response of a finite-sized tissue using finite element method. The effects of the type of stress, the size and frequency of vibration sources, and medium boundaries on displacement patterns are discussed.

• Applied Chemistry for Engineering
• /
• v.16 no.6
• /
• pp.785-789
• /
• 2005

$TiO_2$ powders with rutile and brookite phases were synthesized through homogeneous precipitation of the aqueous $TiOCl_2$ solution, prepared from $TiCl_4$ and HCl solution, and their properties were characterized. Based on the analytical results appropriate molar ratios of ${Cl^-}_{total}:Ti^{+4}$ in precipitating solution for synthesis of pure rutile phase and a mixture of rutile and brookite phases were proposed. The volumetric proportion of brookite increased with increasing HCl concentration under a typical condition obtaining mixed phase of rutile and brookite. The brookite phase in the mixture was transformed to anatase phase by heat treatment at about $800^{\circ}C{\sim}850^{\circ}C$, and finally converted to rutile phase at $1000^{\circ}C$.

• Horticultural Science & Technology
• /
• v.19 no.2
• /
• pp.179-185
• /
• 2001

Throughout the world, physical and chemical analyses of horticultural substrates are carried out in many different ways at the different laboratories. In Europe, standardization in properties and analytical methods of horticultural substrates has been a topic over the last decades. As a result, the CEN methods as European standard methods for the physical and chemical analyses were introduced and the final draft was reported in 1999 by CEN(Committee for European Standardization). Dry matter and moisture content are analyzed after drying samples at $103^{\circ}C$. Laboratory compacted bulk density is analyzed by determining the weight of sample compacted in the test cylinder with constant volume. Dry bulk density, particle density, total pore space, water volume, air volume and volume shrinkage are determined by saturating, draining and drying the sample using double rings and a sand suction table. pH and EC are analyzed by 1:5(sample:distilled water) extraction method on the basis of volume. Organic matter and ash content are determined after drying and combusting the samples. Now, CEN methods are being regarded almost as European standard methods. Further study needs to be carried out for universal applicability of the CEN methods to all the substrates.

• Journal of Korea Society of Industrial Information Systems
• /
• v.4 no.1
• /
• pp.68-76
• /
• 1999

The intuitive understanding of the dynamic pattern generation in asymmetric networks may be useful for developing models of dynamic information processing. In this paper, dynamic behavior of the ring connection neural network in which each neuron is only to its nearest neurons with binary synaptic weights of ±1, has been inconnected vestigated Simulation results show that dynamic behavior of the network can be classified into only three categories: fixed points, limit cycles with basin and limit cycles with no basin. Furthermore, the number and the type of limit cycles generated by the networks have been derived through analytical method. The sufficient conditions for a state vector of n-neuron network to produce a limit cycle of n- or 2n-period are also given The results show that the estimated number of limit cycle is an exponential function of n. On the basis of this study, cyclic connection neural network may be capable of storing a large number of dynamic information.

• KIPS Transactions on Computer and Communication Systems
• /
• v.3 no.10
• /
• pp.377-382
• /
• 2014

Analysis techniques of the data over time from the mobile environment and IoT, is mainly used for extracting patterns from the collected data, to find meaningful information. However, analytical methods existing, is based to be analyzed in a state where the data collection is complete, to reflect changes in time series data associated with the passage of time is difficult. In this paper, we introduce a method for analyzing multi-block streaming data(AM-MBSD: Analysis Method for Multi-Block Stream Data) for the analysis of the data stream with multiple properties, such as variability of pattern and large capacitive and continuity of data. The multi-block streaming data, define a plurality of blocks of data to be continuously generated, each block, by using the analysis method of the proposed method of analysis to extract meaningful patterns. The patterns that are extracted, generation time, frequency, were collected and consideration of such errors. Through analysis experiments using time series data.