• Journal of Korean Society of Transportation
• /
• v.27 no.4
• /
• pp.41-53
• /
• 2009

For 5 years and 6 months, ranging from January 2003 to June 2008, SPSS 12.0 Statistical Program was used to analyze the overall analysis, analysis of center line encroachment, analysis of signal violations, analysis of drinking while intoxicated, analysis of driving without license, analysis of two-wheel vehicle, analysis of pedestrian, analysis of safety equipment, analysis of traffic publicity or education and automobile registration accounts, and casualty of traffic accidents that are determined as having statistical implication based on the statistics available from the policy to take a look at traffic accident in the Daejeon area, and there were some meaningful results. With the proof that there is a certain level of ratio for the correlations between traffic control and traffic accident that the effect of traffic control has shown with certain time interval. The relationship of traffic control and the casualty of traffic accident has very low coefficient of correlations that it is not statistically noticeable that traffic control of the police has almost no effect in preventing traffic accident. This is a display of the fact that the conversion of direction for traffic safety measure undertaken to this point is rather urgent that there is a dire need of establishing the effective alternatives.

• Nuclear Engineering and Technology
• /
• v.53 no.12
• /
• pp.3990-4002
• /
• 2021

CSPACE (Core meltdown, Safety and Performance Analysis CodE for nuclear power plants) for a simulation of severe accident progression in a Pressurized Water Reactor (PWR) is developed by coupling of verified system thermal hydraulic code of SPACE (Safety and Performance Analysis CodE for nuclear power plants) and core damage progression code of COMPASS (Core Meltdown Progression Accident Simulation Software). SPACE is responsible for the description of fluid state in nuclear system nodes, while COMPASS is responsible for the prediction of thermal and mechanical responses of core fuels and reactor vessel heat structures. New heat transfer models to each phase of the fluid, flow blockage, corium behavior in the lower head are added to COMPASS. Then, an interface module for the data transfer between two codes was developed to enable coupling. An implicit coupling scheme of wall heat transfer was applied to prevent fluid temperature oscillation. To validate the performance of newly developed code CSPACE, we analyzed typical severe accident scenarios for OPR1000 (Optimized Power Reactor 1000), which were initiated from large break loss of coolant accident, small break loss of coolant accident, and station black out accident. The results including thermal hydraulic behavior of RCS, core damage progression, hydrogen generation, corium behavior in the lower head, reactor vessel failure were reasonable and consistent. We demonstrate that CSPACE provides a good platform for the prediction of severe accident progression by detailed review of analysis results and a qualitative comparison with the results of previous MELCOR analysis.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.8
• /
• pp.721-725
• /
• 2016

This paper reviews the analysis of a given scenario according to the Hybrid Model, and why accident causation models are necessary in casualty investigations. The given scenario has been analyzed according to the Hybrid Model using its main five components, fallible decisions, line management, psychological precursors to unsafe acts, unsafe acts, and inadequate defenses. In addition, the differences between the SHEL and the Hybrid Model, and the importance of a safety barrier during an accident investigation, are shown in this paper. One unit of SHEL can be linked with another unit of SHEL. However, it cannot be used for the analysis of an accident. Therefore, we must use an accident causation model, which can be a Hybrid Model. This can explain the "How" and "Why" of accident, so it is a suitable model for analyzing them. During an accident investigation, the reason we focus on a safety barrier is to create another safety barrier or to change an existing safety barrier if that barrier fails. Hence, the paper shows how a sea accident can be investigated, and we propose a preventive way of avoiding the accident through combining the methods of different models for the future.

• Fire Science and Engineering
• /
• v.33 no.6
• /
• pp.72-79
• /
• 2019

Through this study, we developed a model for predicting chemical accidents lead to casualties. The model was derived from the logistic regression analysis model and applied to the variables affecting the accident. The accident data used in the model was analyzed by studying the statistics of past chemical accidents, and applying independent variables that were statistically significant through data analysis, such as the type of accident, cause, place of occurrence, status of casualties, and type of chemical accident that caused the casualties. A significance of p < 0.05 was applied. The model developed in this study is meaningful for the prevention of casualties caused by chemical accidents and the establishment of safety systems in the workplace. The analysis using the model found that the most influential factor in the occurrence of casualty in accidents was chemical explosions. Therefore, there is an urgent need to prepare countermeasures to prevent chemical accidents, specifically explosions, from occurring in the workplace.

• Journal of the Korean Institute of Gas
• /
• v.22 no.5
• /
• pp.107-113
• /
• 2018

While accident data are used to show alertness to accidents or to review similar cases, the analysis of nature of accident data its association with surrounding environment is very insufficient. Therefore, it is very necessary to demonstrate the possibility of an accident for a particular region by developing analysis techniques with the related accident data. The purpose of this study is to develop an analysis model and implement a system that produces regional accident probability based on historical weather information data and accident and reporting data. In other words, the system is designed and developed to create models by k-NN and decision tree algorithms with optional user-environment variables based on the probability between weather and accidents about many particular region of Korea. In the future, the models developed in this study are intended to be used to analyze and calculate the risk of a more narrow area.

• Proceedings of the KIEE Conference
• /
• 2005.11c
• /
• pp.60-63
• /
• 2005

In this paper, the accidents of 6.6kV CV cable using many analysis methods such as a pattern anlysis were analyzed; the inner structure analysis; cross section analysis; SEM; EDX, etc. With the analysis and the accident reconstruction, It was possible to analyze the accident causes. For more correct assessment, another accident reconstruction and simulation with a software were required.

• Journal of the Ergonomics Society of Korea
• /
• v.16 no.3
• /
• pp.61-70
• /
• 1997

This study is undertaken to investigate the differences of accident characteristics between occupational deaths and nonfatal injuries in overall industry of Korea. The national statistics of industrial accidents in the years 1991-1994 were extracted from the annual publications of Ministry of Labor. To make the statistical comparisons for the accident characteristics, we derived the destributions of occupational deaths and injuries in terms of injured person's age, work experience, tiem of accident, activity at time of accident, accident type, injury type, injured part of body, and agency of accident. The results show that the distributions of the occupational deaths are significantly different from those of the nonfatal injuries in all characteristics investigated in this study. These findings indicate that the accident prevention programs should be developed and implemented by taking into account the characteristics of working environments based on accident analysis.

• Journal of the Korean Society of Safety
• /
• v.38 no.4
• /
• pp.47-53
• /
• 2023

In the inspection of workplace hazards/risk factors by specialized institutions dedicated to safety management, inspection reports vary based on the inspectors, who lack the authority to enforce improvement of workplace hazards/risk factors. Thus, improvement and accident rates remain steady without decreasing. This study performed a regression analysis on the relationship between improvement and accident rates of categorized inspection items by classifying hazards/risk factors from inspection reports submitted by a specialized safety management institution in Chungbuk after inspecting 10 food and beverage manufacturers over the past three years. The hazards/risk factors were classified into five categories: mechanical, electrical, chemical, human, and environmental. The regression analysis revealed that the improvement rate of hazards/risk factors inspected by the specialized safety management institution influenced accident rates. To enhance improvement rates based on these findings, this study prioritized the correction of the five most frequently cited inspection items with the lowest improvement rates in each area. Based on these inspection items, this study suggested a checklist for use in workplace safety inspections of food manufacturers. This proposed checklist is expected to reduce accident rates in food manufacturing facilities. Currently, guidance and inspection of workplaces are mainly focused on accident rates rather than correcting hazards/risks. Thus, accident rates remain unchanged as workplace risks are inadequately improved according to the unique characteristics of each workplace. When conducting workplace guidance and inspection, policy measures and inspection methods are warranted to increase the improvement rate of hazards/risks.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.28 no.1
• /
• pp.106-114
• /
• 2020

The Lion Air JT610 accident in Indonesia in October 2018, along with the Ethiopian Airline ET302 accident in March 2019, is an significant aircraft accident that detects defects of the B737MAX aircraft. Shortly after the accident, the FAA prohibited operation of the aircraft. This action has affected the market environment of airlines and aircraft manufacturers around the world. In October 2019, Indonesian Traffic Safety Committee released an accident investigation report for Lion Air JT610, which concluded that the causes of the accident were MCAS design defects, lack of education and training, and errors in the repair process. This paper summarizes the flight control system of the B737MAX aircraft, the causes of the accident based on the final accident investigation report, and provides considerations for aircraft design and retrofit.

• Nuclear Engineering and Technology
• /
• v.56 no.6
• /
• pp.2002-2010
• /
• 2024

Korea Atomic Energy Research Institute (KAERI) has operated an integral effect test facility, the Advanced Thermal-Hydraulic Test Loop for Accident Simulation (ATLAS), with reference to the APR1400 (Advanced Power Reactor 1400) for tests for transient and design basis accidents simulation. A test for a loss of coolant accident (LOCA) at the top of the reactor pressure vessel (RPV) had been conducted at ATLAS to address the impact of the loss of safety injections (LSI) and to evaluate accident management (AM) actions during the postulated accident. The experimental data has been utilized to validate system analysis codes within a framework of the domestic standard problem program organized by KAERI in collaboration with Korea Institute of Nuclear Safety. In this study, the test has been analyzed by using thermal-hydraulic system analysis codes, MARS-KS 1.5 and TRACE 5.0 Patch 6, and a comparative analysis with experimental and calculation results has been performed. The main objective of this study is the investigation of the thermal-hydraulic phenomena during a small break LOCA at the RPV upper head with the LSI as well as the predictability of the system analysis codes after the AM actions during the test. The results from both codes reveal that overall physical behaviors during the accident are predicted by the codes, appropriately, including the excursion of the peak cladding temperature because of the LSI. It is also confirmed that the core integrity is maintained with the proposed AM action. Considering the break location, a sensitivity analysis for the nodalization of the upper head has been conducted. The sensitivity analysis indicates that the nodalization gave a significant impact on the analysis result. The result emphasizes the importance of the nodalization which should be performed with a consideration of the physical phenomena occurs during the transient.