• 한국정밀공학회지
• /
• 제11권5호
• /
• pp.171-179
• /
• 1994

For successful implementation of robotic painting system, a structured design and analysis procedure is necessary. In designing robotic system, both functional and economical feasibility should be investigated. As the robotization is complicated task involving implemen- tation details (such as robot selection, accessory design, and spatial layout) together with operation details, the computer aided design and analysis method should be sought. However, conventional robotic design systems and off-line programming systems cannot accommodate these inquiries in a unified fashion. In this research, we develop an interactive design support system for robotization of a cycle painting line. With the developed system called SPRPL (Simulation Package for Robotic Painting Line) users can design the painting objects (via FRAME module), select robot model (ROBOT), design the part hanger (FEEDER), and arrange the workcell. After motion programming (MOTION), the design is evaluated in terms of: a) workpace analysis, b) coating thickness analysis, and c) cycle time (ANALYSIS).

• 소음진동
• /
• 제11권1호
• /
• pp.36-40
• /
• 2001

In this paper, an integrated system for dynamic analysis and optimal design of engine mount systems is presented. The system can simulate static and dynamic behaviors of engine mount systems and optimize design parameters such as mount stiffness, mounting locations with desired design targets of frequency or displacement. A FF-engine with an automatic transmission is used to demonstrate the analysis and optimal design capabilities of the proposed design system.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.613-616
• /
• 1997

MDO(Multidisciplinary Design Optimization) methodology is an emerging new technology to solve a complicate structural analysis and design problem with a number of design variables and constraints. In this paper MDO methodology is adopted through the use of computer aided engineering(CAE) system. And this paper treats the structural design problem of RIROB(Reactor Inspection Robot) through the application of MDO methodology. In a MDO methodology application to the structural design of RIBOS, kinetodynamic analysis is done using a simple fluiddynamic analysis model for the warter flow over the sensor support surface instead of difficult fluid dynamic analysis. Simultaneously the structural static analysis is done to obtain the optimum structural condition. The minimum thickness (0.8cm) of the RIROB housing is obtained for the safe design of RIROB. The kinetodynamic analysis of RIROB. The kinetodynamic analysis of RIROB is done using ADAMS and the static structural analysis of RIROB is done using NISA.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 춘계학술대회논문집 - 한국공작기계학회
• /
• pp.355-360
• /
• 2000

There are many changed while a design is completed. Therefore, if the impact of the design changes is estimated, it may result in the improvement of design efficiency. But, the design changes have various types and affect other parts of the design system. Hence, it is difficult to deal with design changes directly. The purpose of this research is to develop a systematic change propagation tracing algorithm and a method of change impact analysis and then, to implement a change impact analysis system. Process based design is set up for the field of this research. Also the design, composed of design parameters and constraints, is set up for the subject of the research. Change propagation tracing algorithm traces change propagation based on the following concept : If the design parameters are changed, other parameters within the constrains including them may be changed. Using the result of change propagation tracing algorithm, changeable parameters, constraints and tasks can be found. The method of change impact analysis, to calculate change impact value from this changeable tasks, is developed. Change propagation tracing algorithm and the method of change impact analysis are implemented into change impact analysis system and it is applied to the redesign of 2 stage gear drives. It can support different kinds of design activities systematically. especially, at the redesign step, where many design change alternatives exist, change impact value of each alternative exist, change impact value of each alternative is calculated and design change is performed toward direction to minimize the impact of design change. Consequently, it is expected to improve the efficiency of the whole design.

• 한국실내디자인학회논문집
• /
• 제16권4호
• /
• pp.119-126
• /
• 2007

A prototype design process visualization and guidance system, is being developed. Its purpose is to visualize the design process in more intuitive manner so that one can get an insight to the complicated aspects of the design process. By providing a tangible utility to the design process performed by the expert designers or guided by the system, novice designers will be greatly helped to learn how to approach a certain class of design. Not only as an analysis tool to represent the characteristics of the design process, the system will be useful also for learning design process. A design ontology is being developed to provide the system with a knowledge-base, representing designer's activities associated with various design information during the conceptual design process, and then to be utilized for a computer environment for design analysis and guidance. To develop the design ontology, a conceptual framework of design activity model is proposed, and then the model has been tested and elaborated through investigating the nature of the early conceptual design. A design process representation model is conceptualized based on the ontology, and reflected into the development of the system. This paper presents the development process of the visualization system, modeling of design process ontology, and how the system could be utilized for the analysis and learning of conceptual design methods using computer mediated design support environment.

• 한국농공학회논문집
• /
• 제46권5호
• /
• pp.15-26
• /
• 2004

This study was conducted to derive the regional design rainfall by the regional frequency analysis based on the regionalization of the precipitation. The optimal regionalization of the precipitation data were classified by the above mentioned regionalization for all over the regions except Jeju and Ulleung islands in Korea. Design rainfalls following the consecutive duration were derived by the regional analysis using the observed and simulated data resulted from Monte Carlo techniques. Relative root mean square error (RRMSE), relative bias (RBIAS) and relative reduction (RR) in RRMSE for the design rainfall were computed and compared between the regional and at-site frequency analysis. It has shown that the regional frequency analysis procedure can substantially more reduce the RRMSE, RBIAS and RR in RRMSE than those of at-site analysis in the prediction of design rainfall. Consequently, optimal design rainfalls following the classified regions and consecutive durations were derived by the regional frequency analysis using Generalized extreme value distribution which was identified to be more optimal one than the other applied distributions. Diagrams for the design rainfall derived by the regional frequency analysis using L-moments were drawn according to the regions and consecutive durations by GIS techniques.

• 한국CDE학회논문집
• /
• 제8권4호
• /
• pp.231-242
• /
• 2003

Multidisciplinary Design Optimization (MDO) is an optimization technique considering simultaneously multiple disciplines such as dynamics, mechanics, structural analysis, thermal and fluid analysis and electromagnetic analysis. A software system enabling multidisciplinary design optimization is called MDO framework. An MDO framework provides an integrated and automated design environment that increases product quality and reliability, and decreases design cycle time and cost. The MDO framework also works as a common collaborative workspace for design experts on multiple disciplines. In this paper, we present the architecture for an MDO framework along with the requirement analysis for the framework. The requirement analysis has been performed through interviews of design experts in industry and thus we claim that it reflects the real needs in industry. The requirements include integrated design environment, friendly user interface, highly extensible open architecture, distributed design environment, application program interface, and efficient data management to handle massive design data. The resultant MDO framework is datasever-oriented and designed around a centralized data server for extensible and effective data exchange in a distributed design environment among multiple design tools and software.

• 한국의상디자인학회지
• /
• 제25권3호
• /
• pp.69-80
• /
• 2023

The purpose of this study was to analyze the effects of consumers' fashion design evaluation factors on design value and brand loyalty. After confirming a research hypothesis, 247 people were selected as subjects for empirical analysis, and the results of the study are as follows. As a result of the analysis of 'the influence of consumer's fashion design evaluation factors on design value', the fashion design evaluation factors of 'convenience', 'social activity usefulness' and 'fashion ability' had an effect on the emotional design value. 'Convenience', 'functional usefulness', 'social activity usefulness', 'fashionableness' and 'aesthetic' factors affected the rational design value. 'Convenience', 'fashionableness', 'aesthetic' and 'psychological self-conformity' had a positive (+) effect on kinesthetic design values. As a result of the analysis of 'Influence of consumer's fashion design value on brand loyalty', 'emotional design value', 'rational design value' and 'kinesthetic design value' affect attitude brand loyalty, and 'emotional design value' and 'kinesthetic design value' affect brand loyalty. It was found that 'kinesthetic design value' has an effect on behavioral brand loyalty. As a result of the analysis of 'the effect of consumer attitude brand loyalty on behavioral brand loyalty', it was analyzed that attitude brand loyalty had a statistically significant positive (+) effect on behavioral brand loyalty.

• 한국소음진동공학회논문집
• /
• 제20권11호
• /
• pp.995-1000
• /
• 2010

With the development of the auto industry, the automobile manufacturers demand to shorten development period and reduce the cost. Compared with the traditional method, applying the virtual prototype is more economical. This paper presents a method for parameters sensitivity analysis and optimizing the performance of vehicle noise and vibration. The existing design processes were repeatedly analyzed with a focus on vehicle performance to decide the design parameters of dimension, thickness, mounting type of body and chassis systems in the vehicle development period. This paper describes the prediction technique of vehicle performance using L18 orthogonal array layout, quality deviation analysis and parameter sensitivity analysis for robust design. This paper analyzed the performance correlation equation through the frequency and sensitivity database according to a design factor change. The new concept is that the performance prediction is possible without repeated activities of test and analysis. This paper described the parameter analysis applications such as bush dynamic stiffness and bush void direction of rear suspension. Design engineer could efficiently decide the design variable using parameter analysis database in early design stage. These improvements can reduce man hour and test development period as well as to achieve stable NVH performance.

• 한국CDE학회논문집
• /
• 제6권1호
• /
• pp.59-68
• /
• 2001

This paper investigates the structural analysis and design of mechanical heart valve through the numerical analysis methodology. In a numerical analysis methodology application to the thickness minimization structural design of mechanical heart valve, fluid analysis is performed for the blood flow through a bileaflet mechanical heart valve. Simultaneously the kinetodynamic analysis is carried out to obtain the appropriate structural condition for the structural analysis. Thereafter the structural static analysis is also carried out to confirm the thickness minimization structural condition(minimum thickness shape of leaflet).