• 전기전자학회논문지
• /
• 제3권1호
• /
• pp.11-21
• /
• 1999

본 논문은 기존의 오디오 DAC 칩 외부의 아날로그 저역통과 필터를 하나의 칩에 집적하기 위하여 디지털 보간 필터의 구조를 FIR와 IIR 필터를 혼합한 구조를 제시하였다. 제시된 디지털 보간 필터를 이용한 ${\Delta}{\Sigma}$ 변조기 출력은 통과대역 내 (>$0.41{\times}fs$) 진폭은 ${\pm}0.001dB,\;0.41{\times}fs$에서 감쇠는 -0.0025[dB], 저지대역 이상(>$0.59{\times}fs$)에서 감쇠는 -75dB였고, 통과대역 내에서 군지연이 30.07/fs[s]이고, 군지연 오차가 0.1672%였다. 또한 저지대역 65[kHz]에서 감쇠가 약 -20[dB] 향상되어 이로 인해 기존의 디지털 보간 필터 구조에 비해 아날로그 저역통과 필터의 RC 적을 감소시킬 수 있음을 알 수 있었다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 하계종합학술대회논문집
• /
• pp.847-850
• /
• 1998

One of the most difficult problem of designing VLSI is a mixed-circuit design, that is to design circuit containing both analog parts and digital parts. Digital to analog converter and analog to digital converter is a typical case. Especially it can be a serious problem when mixed circuit are put into a large digital circuit like microcontroller. However nowadays this problem is settled by separating analog circuit parts outside the IC. This technique is based on converting a digital signal into a pulse sequence. Then an analog signal is obtained by averaging this pulse sequence at the external low-pass filter. An anlog to digital converter is designed using a stochastic logic instead of a traditional PWM (pulse-width modulation) signal and ins implemente dusing FPGa. Stochastic pulse sequence can be made as a simple circuits and moreover can be mathematically processed by simple circuits -AND gates. The spectral property of stochastic pulse sequence method is better than that of PWM method. So it make easy to design a external low-pass filter. This technique has important advantages, especially the reduction of the ADC cost.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제2권2호
• /
• pp.115-121
• /
• 2002

This paper presents an evolutionary design of digital IIR filters using the genetic algorithm (GA) with modified genetic operators and real-valued encoding. Conventional digital IIR filter design methods involve algebraic transformations of the transfer function of an analog low-pass filter (LPF) that satisfies prescribed filter specifications. Other types of frequency-selective digital fillers as high-pass (HPF), band-pass (BPF), and band-stop (BSF) filters are obtained by appropriate transformations of a prototype low-pass filter. In the GA-based digital IIR filter design scheme, filter coefficients are represented as a set of real-valued genes in a chromosome. Each chromosome represents the structure and weights of an individual filter. GA directly finds the coefficients of the desired filter transfer function through genetic search fur given filter specifications of minimum filter order. Crossover and mutation operators are selected to ensure the stability of resulting IIR filters. Other types of filters can be found independently from the filter specifications, not from algebraic transformations.

• 정보학연구
• /
• 제9권1호
• /
• pp.33-39
• /
• 2006

This study is for the contents of development to the hardware system and software driving algorithm to implement the frequency band of about 7KHz los pass digital filter which has the cut-off frequency of 392Hz by interfacing of a microprocessor with its peripheral analog-to-digital converter chip and digital-to-analog converter chip. The simplicity of digital filter design without difficulty and the implementation of programmed digital filter can be realized by providing the interfacing method to implement the law pass digital filter for the biological signals and the realization method of computer algorithm by a microprocessor.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 추계종합학술대회 논문집(1)
• /
• pp.93-96
• /
• 2000

This paper has been proposed an audio DAC structure composed of FIRs and IIR filters as digital interpolation filter to integrate the off-chip analog low-pass filter on-a-chip. The passband ripple(< 0.41${\times}$fs), passband attenuation(at 0.41${\times}$fs) and stopband attenuation(> 0.59${\times}$fs) of the Δ$\Sigma$ modulator output using the proposed digital interpolation filter had ${\pm}$ 0.001 ［㏈］, -0.0025［㏈］ and -75［㏈］, respectively. Also the inband group delay was 30.07/fs［s］ and the error of group delay was 0.1672%. Also, the attenuation of stopband has been increased -20［㏈］ approximately at 65［㎑］, out-of-band. Therefore the RC products of analog low-pass filter on chip have been decreased compared with the conventional digital interpolation filter structure.

• 한국정보통신학회논문지
• /
• 제5권3호
• /
• pp.533-541
• /
• 2001

본 논문은 플랫트 딜레이 특성의 올패스 필터의 합을 이용한 로우패스 필터를 제시하였다. 이 필터는 병렬 구조의 올패스 필터로 구성하였고, 일반적인 아날로그 필터는 위상과 지연을 조정하는 것이 불가능하지만, 제시한 필터를 이용하면 위상과 지연을 조정하는 것이 용이하다는 장점을 가지고 있다. 그리고 통과대역 폭과 크기 특성, 군지연 특성과 차단 주파수를 비교 분석하였다. 아울러, 원하는 차단 주파수를 얻기 위해서 가중치를 인가하여, 융통성 있는 차단 주파수와 군지연 특성을 얻었다.

• 대한전자공학회논문지
• /
• 제8권5호
• /
• pp.20-26
• /
• 1971

대역통과여파기는 전달함수에 의한 진동감쇄율과 복소평면을 이용한 극좌표 응답도로써 그 특성이 설명되어 왔으나 여파기를 실제로 사용할 때에 시간에 대한 응답이 중요한 문제로 나타나는바 저주파대에서의 대역통과 여파기의 시간에 대한 응답특성을 구하고 다음단의 회로동작에 영향을 주는 요인들의 함수관계를 Analog전자계산기로 구성한 2차식 RC 능동여파기에 의해 밝혔다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2005년도 추계종합학술대회
• /
• pp.1000-1002
• /
• 2005

최대 7기기까지의 슬레이브 디바이스들과 연결이 가능한 블루투스 피코넷에서, RF 연결단으로 송신되는 무선 데이터는 블루투스 버전 1.1 송신 규약에 적합하도록 1마이크로미터 단위로 슬라이싱되어 베이스밴드 입력단으로 들어오게 된다. 본 연구에서는 상대적으로 불안정한 RF 디바이스에서 베이스밴드로 전달되는 아날로그 신호를 1 마이크로미터 단위의 정확한 슬라이싱을 가능하게 해 주고, 또한 불안정한 아날로그에 대한 신호의 노이즈를 제거할 수 있는 디지털 로우패스 필터를 설계하였다. 설계된 디지털 로우패스필터는 블루투스 RF 일체형 베이스밴드 침의 절전 모드, 정상동작 모드와 고속 동작 모드인 12MHz, 24MHz, 48MHz 각 주파수에서 모두 정상적으로 동작하였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 추계종합학술대회 논문집(1)
• /
• pp.397-400
• /
• 2000

Telecommunication system demands for increased bandwidths and operating frequencies for analog signal processing could be satisfied in the near future by the emergence of a novel technology based on magnetostatic waves propagating in low loss ferrimagnetic films. The magnetostatic wave is the only available technology for analog signal processing directly at millimeter wave frequencies. This paper has been studied the design and implementation of a Magnetostatic Surface Wave band-pass filter for LMDS system.

• 조명전기설비학회논문지
• /
• 제29권3호
• /
• pp.69-80
• /
• 2015

This paper is writing about developing magnet power supply. It is very important for power supply to obtain output current in high precision and high stability. As a switching noise and a power noise are the cause of disrupting the stability of output current, to remove these at the front end, low pass filter with 300Hz cutoff frequency is designed and placed. And also to minimize switching noise of the current into magnet and to stop abrupt fluctuations, output filter should be designed, when doing this, we design it by considering load has high value inductance. As power supply demands the stability of less than 5ppm, high precision 24bit(300nV/bit) analog digital converter is needed. As resolving power of 24bit(300nV/bit) analog digital converter is high, it is also very important to design the input stage of analog digital converter. To remove input noise, 4th order low pass filter is composed. Due to the limitation of clock, to minimize quantization error between 15bit DPWM and output of ADC having 24bit resolving power, ${\Sigma}-{\Delta}$ modulation is used and bit contracted DPWM is constituted. And before implementing, to maximize efficiency, simulink is used.