• Steel and Composite Structures
• /
• v.43 no.3
• /
• pp.403-417
• /
• 2022

Recently, there has been an increasing demand for buildings that allow rapid assembly of construction elements, have ample open space areas and are flexible in their final intended use. Accordingly, researchers have developed new competitive structures in terms of cost and efficiency, such as cold-formed steel and timber composite floors, to satisfy these requirements. Cold-formed steel and timber composite floors are light floors with relatively high stiffness, which allow for longer spans. As a result, they inherently have lower fundamental natural frequency and lower damping. Therefore, they are likely to undergo unwanted vibrations under the action of human activities such as walking. It is also quite expensive and complex to implement vibration control measures on problematic floors. In this study, a finite element model of a composite floor reported in the literature was developed and validated against four-point bending test results. The validated FE model was then utilised to examine the vibration behaviour of the investigated composite floor. Predictions obtained from the numerical model were compared against predictions from analytical formulas reported in the literature. Finally, the influence of various parameters on the vibration behaviour of the composite floor was studied and discussed.

• Korean Journal of Remote Sensing
• /
• v.6 no.2
• /
• pp.89-113
• /
• 1990

The purpose of this study is to develop means to apply GIS and remote sensing technology to the analysis of Korean urban open spaces. To achieve this objective, a framework of analysis of urban open spaces was developed, and then the framework was applied for the evaluation of the potential and suitability of open spaces of Ansan City, which is a new town developed to accomodate industries relocation from Seoul, Korea, mainly due to their pollution problems. The software used in this study are IDRISI, a grid-based GIS, and KMIPS, a remote sensing analysis system. Both packages are based on IBM PC/AT computers with Microsoft DOS. Landsat MSS and TM data were used for the land use classification, land use change detection, and analysis of transformed vegetation indices. The size of the geographic data base is 110 rows and 150 columns with the spatial resolution of 100m$\times$100m. The framework of analysis includes both quanititative and qualitative analysis of open spaces. The quantitative analysis includes size and distribution of open spaces, urban develpment of open spaces, and the degree of vegree of vegetation removal of the study area. The qualitative analysis includes evaluative criteria for primary productivity of land, park use potential, major visual resources, and urban environmental control. The findings of this study can be summarized as follows. First, the size of builtup areas increased 18.73km$^2$, while the size of forest land decreased 10.86km$^2$ during last ten years. Agricultural lands maintained its size, but shifted toward outside of the city into forest. Second, the potential of open spaces for park use is limited mainly due to their lack of accessibility and connectivity among open spaces, in spite of ample acreage and good site conditions. Third, major landscape elements and historic sites should be connected to the open space system of the city by new accesses and buffers.

• The Korean Journal of Air & Space Law and Policy
• /
• v.30 no.2
• /
• pp.427-468
• /
• 2015

To date, we have considered the theoretical views, the standpoint of states and the discourse within the international community such as the UN Committee on the Peaceful Uses of Outer Space(COPUOS) regarding the Air/Outer Space Boundary Question which is one of the first issues of UN COPUOS established in line with marking the starting point of Outer Space Area. As above mentioned, discussions in the United Nations and among scholars of within each state regarding the delimitation issue often saw a division between those in favor of a functional approach (the functionalists) and those seeking the delineation of a boundary (the spatialists). The spatialists emphasize that the boundary between air and outer space should be delimited because the status of outer space is a type of public domain from which sovereign jurisdiction is excluded, as stated in Article 2 of Outer Space Treaty. On the contrary art. I of Chicago Convention is evidence of the acknowledgement of sovereignty over airspace existing as an international customary law, has the binding force of which exists independently of the Convention. The functionalists, backed initially by the major space powers, which viewed any boundary demarcation as possibly restricting their access to space, whether for peaceful or non-military purposes, considered it insufficient or inadequate to delimit a boundary of outer space without obvious scientific and technological evidences. Last more than 50 years there were large development in the exploration and use of outer space. But a large number states including those taking the view of a functionalist have taken on a negative attitude. As the element of location is a decisive factor for the choice of the legal regime to be applied, a purely functional approach to the regulation of activities in the space above the Earth does not offer a solution. It seems therefore to welcome the arrival of clear evidence of a growing recognition of and national practices concerning a spatial approach to the problem is gaining support both by a large number of States as well as by publicists. The search for a solution to the problem of demarcating the two different legal regimes governing the space above Earth has undoubtedly been facilitated and a number of countries including Russia have already advocated the acceptance of the lowest perigee boundary of outer space at a height of 100km. As a matter of fact the lowest perigee where space objects are still able to continue in their orbiting around the earth has already been imposed as a natural criterion for the delimitation of outer space. This delimitation of outer space has also been evidenced by the constant practice of a large number of States and their tacit consent to space activities accomplished so far at this distance and beyond it. Of course there are still numerous opposing views on the delineation of a outer space boundary by space powers like U.S.A., England, France and so on. Therefore, first of all to solve the legal issues faced by the international community in outer space activities like delimitation problem, there needs a positive and peaceful will of international cooperation. From this viewpoint, President John F. Kennedy once described the rationale behind the outer space activities in his famous "Moon speech" given at Rice University in 1962. He called upon Americans and all mankind to strive for peaceful cooperation and coexistence in our future outer space activities. And Kennedy explained, "There is no strife, ${\ldots}$ nor any international conflict in outer space as yet. But its hazards are hostile to us all: Its conquest deserves the best of all mankind, and its opportunity for peaceful cooperation may never come again." This speech seems to even present us in the contemporary era with ample suggestions for further peaceful cooperation in outer space activities including the delimitation of outer space.

• Archives of design research
• /
• v.5 no.1
• /
• pp.7-20
• /
• 1992

Since 80th, in the monetary markets due to the escalation of creditable promptness dealing of financial goods, Korea monetary business has been confronted with structual contradictions. The first like a men power reduction, inorder to meet and satisfying with cost reduction policy of the holding firms and secondly, escalation and expention of business networks or facilities inorder to meet and satis~'ing with customers continuously seeking for prompt, acurate, and helpfulness service nearly like one similar to a door to door service. Accordingly, the firms eventually poured mere sweaty money into procuring such devices for upgrading. On the contrary, however, regardless the escalation monetary expenditure may be, inorder to promote quality of the same devices are keen necessary because present days customer groups were tended to receives ample service almost like door to door service without moving too$$\mu$h apart from the immediate spot where they belongs tl or veryspot of where actually they spend instead of deep consideration of natures, quality or sttractiveness of service medias what they can received from. Under the present circumstance, the financial business firms, however, would highly suffering and recei\ulcornerves pressures from imblalance natures ofincoming and out go of the business budget due to excessive inc1ease of managerial expences. For these reasons, therefor, in order to solves, compensates, improves, and developes most effective fina\ulcornerncial service for customers can use under most pleasant environment, the establishment of adequate standardization of such service devices based on the foregoing environmental circumstances. This analytical study, therefor, mainly aimed and emphasized based on pre- estimatimation of proper de\ulcornervlopment and use of the unattended servicing devices such as Cash Dispenser and Auto Teller Machine bygeneralization, automating. and innovation of design to meet compactness and door to door like convenient service for customers which can be achieved by performing constant comparative analysis and continual study toward development of such devices those of which produced by Five (5) major domestic producers aro~nd the country.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.2 no.3
• /
• pp.25-36
• /
• 2000

The purpose of this research work is to propose an analytical method of tunnel design based on reasonable site data. Therefore the proposed design method consists of monitoring data and Modified In Situ Rock Model. Also the Rock Mass Rating for very poor quality rock is very difficult to estimate, the balances between the ratings may no longer gives a reliable basis for the rock mass strength. But in reality Rock Mass Rating is only the property which can be obtained from face mapping records of the exposed tunnel face during construction stage. Evaluation of rock parameters for the actual design prior to tunnel construction should be corrected during tunnelling process in particularly complex ground conditions. This study intends to investigate application of in-situ rock model to soft rock tunnelling (weathered rock) by face mapping results and site measurement data that are obtained at the costraction site of Seoul Subway Tunnel. For the preparation of more reliable ground parameters, the Rock Mass Rating values for the weathered rocks were modified and readjusted in accordance with the measurement data. The modified input parameters obtained by the proposed method are used for the prediction of the tunnel behavior at subsequent construction stages. The results of this study revealed that more reasonable feed back tunnel analysis can be possible as suggested. Ample measurement data would be able to confirm the new proposed technique in this research work.

• The Korean Journal of Air & Space Law and Policy
• /
• v.30 no.2
• /
• pp.373-401
• /
• 2015

The UAV(Unmanned Aerial Vehicle, Drone) technology has been undergoing rapid progress, accompanied with a growth in the market. However, domestic industry standards and technology lag behind such progress happening on the international scene, and in particular in developed countries. Related regulations are also deemed lacking to address the issues that arise with such developments. Meanwhile, as the rise of UAV technology is a fairly recent phenomenon, the gap between Korea and developed countries is not too big. As this technology has high relevance to information and communication technologies, it also offers ample leeway for Korea to catch up in the field of UAV. As such, this paper seeks to provide a survey of the overall technology, market and regulations concerning UAV to identify possible measures on how to address any issues that may arise through proper policies. Due to the progress made in the field of UAV technology and increased penetration rate, striking a right balance between putting in place a proper regulatory system and establishing policies that foster growth in the field has risen as a very important issue. While the importance of establishing a legal system that helps prevent possible risks is indeed important, it must also be acknowledged that excessive regulation can also hinder technological progress. This, in turn would stagnate the market and dampen the entrepreneurial spirit in the society. In the case of new, practical technologies such as UAV, a prompt establishment of regulatory systems and policy measures in terms of policies is a requisite. In brief, in order to promote progress in the UAV industry and at the same time, for public safety and the protection of privacy, there should be an appropriate level on the easing and tightening of the regulation.

• Journal of Distribution Science
• /
• v.10 no.4
• /
• pp.7-11
• /
• 2012

"Great things in business are never done by one person; they're done by a team of people." By Steve Jobs, 2003. As define by Linda Naiam - Creativity is the act of turning new and imaginative ideas into reality. Creativity involves two processes: thinking, then producing. Innovation is the production or implementation of an idea. If you have ideas, but don't act on them, you are imaginative but not creative. So in order to maintain the pace with the changing business scenario and coping with the competition Innovation and Creativity is considered a mandatory tool for a business to exist and grow in market. Whether a company is Employee centric or Business centric Innovation and creativity has to have its space in order to keep a business ahead of others in the Market. Also it's not just the competition which has led to the Innovation and Creativity in Business practices it's also the demanding chunk of consumers and customers who are aware and prefer maximum choices before making a final deal. Another reason as to why there is a change in business practices is the globalization of businesses where you need to rope in the Innovative ideas to launch and sustain in new market. There had been tremendous shift in business practices but to give a room to innovative ideas and implement that creativity need ample to space and vision along with an attitude where in you can resist for getting an immediate results from innovative business practices. Corporate Creativity is characterized by the ability to perceive the world in new ways, to find hidden patterns, to make connections between seemingly unrelated phenomena, and to generate solutions. Generating fresh solutions to problems, and the ability to create new products, processes or services for a changing market, are part of the intellectual capital that give a company its competitive edge. Creativity is a crucial part of the innovation equation. The innovation and creativity is not limited to any area of business, it can start from your waiting lounge to your board room meeting depending upon how the things are perceived and implemented for the betterment of people and business. The purpose of this research is to understand the latest creative business approaches and practices that organizations are following to be different from their competitors. Also this shift from generic business practices to the Innovative and Creative approach seems to take the business into new world. This approaches means starting from the bottom of the Pyramid and finally touching the pinnacles in Innovation and creativity. The paper will discuss on the various areas of business where in innovative approaches can be roped in and sets new bench mark altogether in the business arena.

• Journal of Distribution Research
• /
• v.12 no.2
• /
• pp.79-102
• /
• 2007

Consumers evaluate stores by comparing stores that we, in their minds, similar and are competitive with one another; and in this way, the term "consideration set of stores" is defined as those store alternatives the consumer is aware of and evaluates positively. The purpose of this study is to aid in understanding the consideration set of stores in store choice processes in apparel product purchases. More specifically, this study aims to clarify the relation between consideration set of stores and importance of store image. As a result, the respondents of quantitative study were classified into seven groups by the number of stores and store types they considered: 1) "small-road shop sets group" ; 2) "small-market sets group" ; 3) "small- department store sets group" ; 4) "small-department store/outlet sets group" ; 5) "large-department store/market sets group" ; 6) "large-department store/road shop sets group" ; and 7) "large-department store sets group". Further, significant differences among the groups in the importance of store image were observed. For example, low prices were an important factor in both the small-market considering group and large-department store/market considering group when choosing a retail store, there were also differences in the considering groups in that for the small-department store considering group, store mileage-discount cards were important whereas ample space for relaxation around the stores were important retail store selection factors for the large-department store/road shop considering group. This study may provide a useful direction to retailers in finding out who the target customers and competitive stores are and allow retailers to make proper marketing strategies.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.34 no.2
• /
• pp.303-317
• /
• 2010

This study helps in the production of brassieres suitable for female adults by researching the actual wearing conditions and purchasing status, satisfaction rate, and preferences of female college students in their early 20's. The collected data was analyzed by a SPSSWIN 13.0 Program and the results of the research are as follows. 1. There is a noticeable difference between the breast satisfaction rate and breast size, in addition the satisfactory rate was higher in the normal breast size or a little ample size than in the very small or very big size. According to the shape, the satisfactory rate for the breast appeared to be high in the case of the recognition and evaluation of the hemisphere type than the flat, cone, pop out, and downward type. 2. For fitness, the looseness at the top of the cup (pressed between the breasts at the upper part of the front middle), pressing and looseness at the upper sides of the cup, inappropriate size of the cup, tightness of the wings, tightness at the bottom round of the breasts, the narrow width of the wire, wide space of the shoulder strings, and the sliding of the shoulder strings had problems that needed improvement. 3. The major priorities for purchasing brassieres are size, fitness, and aesthetic qualities. As a result, the size and the fitness are more important than the trend or decorations since the brassiere has the function to support the breasts that shows that hygiene and sanitation are recognized as an important standard for undergarment selection. The size and the fitness are important factors regardless of breast types in the examination of the selection standards of the brassieres for each breast type, but the cone and hemisphere types have higher preferences for design; the pop out type has more considerations for the material of the cloth. The result show that appearance is more important for smaller breasts, but the functionality of the brassier is more important than the appearance for medium and larger breast sizes.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.4
• /
• pp.338-347
• /
• 2023

Jinhae Bay, characterized by frequent runaway ships and strong winds during typhoon attacks, poses a high risk of maritime accidents such as ship collisions and groundings. This study aims to determine a safe separation distance between ships in the Jinhae Bay anchorage, considering the unique environmental characteristics of the Korean sea area. Analysis revealed that an average of 100-200 ships anchor in the typhoon avoidance area in Jinhae Bay during typhoon attacks, with approximately 70% of ships experiencing anchor dragging owing to strong external forces exceeding 25 m/s wind speeds. In this study, we analyzed and presented the separation distances between ships during anchoring operations based on domestic and international design standards, separation distances between ships used as actual typhoon shelters in Jinhae Bay, and appropriate safe distances for ships drifting under strong external forces. The analysis indicated that considering the minimum criteria based on the design standards and emergency response time, a minimum safe distance of approximately 400-900 m was required. In cases where ample space was available, the separation distance was recommended to be set between 700 to 900 m. The findings of this study are anticipated to contribute to the development of guidelines for establishing safe separation distances between ships seeking refuge from typhoons in Jinhae Bay in the future.