• 동력기계공학회지
• /
• 제19권1호
• /
• pp.5-12
• /
• 2015

• 한국산학기술학회논문지
• /
• 제21권9호
• /
• pp.397-404
• /
• 2020

현재 운영되고 있는 군 지휘·지원차량은 상용차량의 일부를 개조하여 제작되었으며, 군에서 필요한 통신장비 운용환경을 확보하기 위하여 통신실 내부에 별도의 컨버터를 장착하는 전원공급시스템이 적용되었다. 하지만, 이러한 전원공급시스템은 전자파 방사 노이즈를 발생시켜 차량에서 무전교신 시 잦은 잡음과 통신감도 저하 등의 문제점이 발생되었다. 이를 개선하기 위해, 엔진에 발전기를 추가 장착하여 통신장비에 필요한 전력을 공급받도록 전원공급시스템을 변경하였다. 추가 장착된 발전기는 통신장비가 운용되는 통신실과 완전히 분리된 엔진 룸에 위치하도록 설계되어 전원공급시스템에서 발생되는 전자파 방사 노이즈에 의한 영향을 감소시켜줄 것으로 기대되었다. 개선된 시스템의 효과를 검증하기 위하여 기존 차량과 신규 전원공급시스템이 적용된 차량에 대하여 광대역 방사시험을 각각 수행하였고 측정 결과를 비교하였다. 시험 결과 신규 전원공급시스템이 적용된 차량의 광대역 방사 노이즈는 국내 자동차 안전기준에 모두 만족하였으며, 기존 차량 대비 일부 주파수 구간을 제외한 대부분의 구간에서 감소함을 확인할 수 있었다. 특히, 차량 우측면의 수직편파 170~225 MHz 구간에서 최대 10.751 dB𝜇V/m 감소하였다.

• Journal of Electrical Engineering and Technology
• /
• 제11권5호
• /
• pp.1153-1164
• /
• 2016

• Journal of Power Electronics
• /
• 제12권1호
• /
• pp.49-57
• /
• 2012

This paper presents performance evaluation of an Integrated Starter-Alternator (ISA) prototype with an Interior Permanent Magnet (IPM) synchronous machine under sensor-less operation. To attain a high starting torque at zero speed and in subsequent extremely low speed range, a hybrid signal injection method is proposed. At higher speed, an improved stator flux observer is used for the stator flux estimation. This observer is able to produce accurately-estimated stator flux linkage for high performance Direct Torque and Flux Control (DTFC) implementation. The sensor-less DTFC IPM synchronous machine drive takes full advantage of the capacity of the power converter and fulfills the control specifications for the ISA. The trajectory control algorithm responds rapidly and in a well behaved manner over a wide range of operating conditions. The experimental results verify the feasibility and advantages of the system.

• International Journal of Automotive Technology
• /
• 제7권7호
• /
• pp.785-793
• /
• 2006

The topic of this study is the control strategy of a mild hybrid electric vehicle (HEV) equipped with a continuously variable transmission (CVT). A brief powertrain and vehicle configuration is introduced followed by the control strategy of the HEV with emphasis on two key parts. One of them is an ideal operating surface (IOS) that operates the CVT powertrain optimally from the viewpoint of the tank-to-wheel efficiency. The other is a charge sustaining energy management to maintain the battery state of charge (SOC) within an appropriate level. The fuel economy simulation results of the HEV over standard driving cycles were compared with those of the baseline vehicle. Depending on the driving cycle, 1.3-20% fuel saving potential is predicted by the mild hybridisation using an integrated starter alternator (ISA). The detailed energy flow analysis shows that the majority of the improvement comes from the idle stop function and the benefits for electrical accessories. Additionally, the differences between the initial and the final SOC are in the range $-1.0{\sim}+3.8%$ in the examined cycle.

• 한국생산제조학회지
• /
• 제22권6호
• /
• pp.908-912
• /
• 2013

Because of their longer operating times and larger size relative to conventional fans, the cooling fans mounted in buses consume larger amounts of energy. Most of the cooling fans mounted in a bus are connected to the engine by a viscous clutch. A viscous cooling fan's speed is determined by its fluid temperature, which is affected by the air flow through the radiator. The fan does not react immediately to the coolant temperature and in doing so causes unnecessary energy consumption. Therefore, the fuel economy of buses using viscous fans can be improved by changing to an electric cooling fan design, which can be actively controlled. In addition, electric power consumption is increased by using electric cooling fans. Thus, when electric fans are applied in conjunction with the alternator management system (AMS), the fuel economy is further enhanced. In this study, simulations were performed to predict coolant temperature and cooling fan speeds. Simulations were performed for both viscous and electric cooling fans, and power consumption was calculated. Additionally, fuel economy was calculated applying both the alternator management system and the electric cooling fan.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제4B권4호
• /
• pp.157-169
• /
• 2004

Motor & generator operation at widely variable speeds is needed in various applications but hybrid and electric vehicle (HEV) stand out today, as quite a few companies are launching this year their mass production of HEVs. The quest for better starter-generators is far from ended, though. The present review paper unfolds a comparative critical evaluation of various starter-generators and their control for HEV. Induction, interior PM synchronous, transverse-flux PM synchronous, switched reluctance, together with claw-pole and biaxial excitation PM synchronous (BEGA) configurations with their control are all considered in system evaluations.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2005년도 전력전자학술대회 논문집
• /
• pp.634-637
• /
• 2005

We propose a charge/discharge model for network based vehicle. These model include motor, alternator, lamp, brake, window brush, air conditioner, etc.. Also, we simulate these models in Matlab. The simulation results show that error range is less than 3%. So, we can adopt these model to charge/discharge simulator for network based vehicle. If this error range can be shrunk within 2%, we can use this simulator for comertial use.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 A
• /
• pp.231-233
• /
• 1995

The new hybrid scheme for electric bus is presented in this paper. This system is composed of a three-phase AC induction motor, one inveter and one system controller. The motor can be acted as starter, motor itself, alternator, generator and retarder. Various functions are simulated. The design stage has been finished. And the various experimental tests are undertaken now.

• 한국자동차공학회논문집
• /
• 제24권4호
• /
• pp.480-486
• /
• 2016

Manufacturers have been applying several technologies that can improve the fuel economy of their cars. The regulated voltage control(RVC) system, is one of those technologies being used in passenger cars. In RVC, the voltage of an alternator is controlled depending on the electrical load demand or battery SOC, although each manufacturer differs from another in terms of detail. RVC can reduce the load of an alternator by consuming the stored energy of a battery and simultaneously generate energy. In this paper, a diesel passenger car equipped with an RVC system was tested under FTP-75 and HWFET modes to evaluate fuel economy as their initial battery SOC(100, 90, 80 and 60 %). The test results showed that the initial SOC affects fuel economy only under the FTP-75 mode. FTP-75 fuel economy of the 60% SOC was 13.2 % lower than the 100 % SOC. Also, the simultaneous consumption of the two energy sources did not appear in 60 % SOC.