• 한국주거학회논문집
• /
• 제16권4호
• /
• pp.121-129
• /
• 2005

The major goal of this study is drawing design plan factors considering residents' life cycle and life style when remodeling design is needed. By drawing such design factors, the study will propose an alternative remodeling design plan. Such design method was defined as Multi-Dimensional module design method. And constructing data-system based on Multi-Dimensional module was secondary goal in this study. The details are as follows: Based on analysis of Residents' demand for remodeling and features of emotion-design applied to remodeling, the system which is suitable for application in remodeling design method was conducted. Based on the type of construction materials, the level value was set up according to emotion-factor application. Also, by conducting coding operation according to the distinction of construction materials, this study seeks the unit drawing method of information for constructing emotion-information system.

• 한국항공우주학회지
• /
• 제38권5호
• /
• pp.467-476
• /
• 2010

본 연구에서는 개념 설계 과정에서 항공 인증 규정 및 의사결정모델을 이용하여 최적화 문제 구성과 항공기 기준형상을 선정하는 프로세스를 정립하고, 이를 소형제트항공기에 적용하였다. 항공기 안전성을 보장하기 위한 최소안전 요구조건인 항공 인증 규정은 항공기 설계 초기단계에서부터 고려되어야 하는 사항으로 반드시 만족해야 한다. 인증 규정 및 사용자 요구도 분석 후, 산업공학기법인 Affinity Diagram, Nested Column Diagram, Quality Function Deployment (QFD), Pugh Concept Selection Matrix와 같은 의사결정모델을 사용하여 alternative 형상군에 대한 평가를 수행하였다. 그 후 Best alternative 형상에 대한 설계가능영역 분석을 통해 항공 인증 규정에 적합하고 객관적인 문제 구성 및 항공기 기준형상을 도출 할 수 있었다.

• 한국디지털건축인테리어학회논문집
• /
• 제5권1호
• /
• pp.1-8
• /
• 2005

The major goal of this study is drawing design plan factors considering residents' life cycle and life style when remodeling design is needed. By drawing such design factors, the study will propose an alternative remodeling design plan. Such design method was defined as Multi-Dimensional module design method. And constructing data-system based on Multi-Dimensional module was secondary goal in this study. The details are as follows: Based on analysis of Residents' demand for remodeling and features of emotion-design applied to remodeling, the system which is suitable for application in remodeling design method was conducted. Based on the type of construction materials, the level value was set up according to emotion-factor application. Also, by conducting coding operation according to the distinction of construction materials, this study seeks the unit drawing method of information for constructing emotion-information system.

• 한국CDE학회논문집
• /
• 제16권4호
• /
• pp.305-313
• /
• 2011

This paper proposes a method for reusing kinematic design data for virtual facilities, Making a virtual model of a facility involves two major activities: geometric design (virtual model visualization) and kinematic design that should be remodeled frequently whenever design changes occur, Conventionally, a virtual model of an automated facility focuses on the design level, which mainly deals with design verification, alternative comparison, and geometric model diagnosis, Although a design level model can be designed with the information of past models from PLM system, a simulation level model is not sufficient utilized to be reused for kinematic design purpose, We propose a method for reusing kinematic information of a past simulation model to cope with this problem, We use the concept or the 'center of mass', which is a point representing the mean position of the matter in a body or system. And we also use comparison method of a boundary box to identity which 3D objects have to be involved from the design model to a link structure that is contained in the simulation model. Because a proposed method only use not a historical approach but a geometrical approach, it is more effective to apply to the field.

• 한국멀티미디어학회논문지
• /
• 제11권12호
• /
• pp.1688-1696
• /
• 2008

We propose a hierarchical service management method using Bloom filters for large MANETs. In this paper, a MANET is comprised of logical grid hierarchy, and each mobile node within the lowest service region multicasts the Attenuated Bloom Filter (ABF) for services itself to other nodes within the region. To advertise and discovery a service efficiently, the server node of the lowest server region sends the Summary Bloom Filter (SBF) for the ABFs to the server node of upper server region. Each upper server has the set of SBFs for lower vicinity service regions. The traffic load of the proposed method is evaluated by an analytical model, and is compared with that of two alternative advertisement solutions: complete advertisement and no advertisement. As a result, we identify that the traffic load of the proposed method is much lower than that of two alternative advertisement solutions.

• 대한기계학회논문집B
• /
• 제22권7호
• /
• pp.966-979
• /
• 1998

Thermodynamic and dynamic analysis has been conducted to investigate performance variations induced by substitution of alternative refrigerants, HFC134a or HC600a for CFC12 in hermetic reciprocating compressors. For the thermodynamic analysis, mass and energy conservation laws are applied to the cylinder volume and Helmholtz resonator modeling method is adopted to describe gas pulsations at suction and discharge system. The modeling of the dynamics of the compressor mechanism has been performed with lumped mass method to analyse the bearing loads and friction losses at each bearing. To verify the correctness of this analysis, results of the performance simulation have been compared to those of calorimetric measurrements of compressor operating with CFC12. Analysis of the various losses, noise and reliability as well as performance has been conducted to present the design guideline for the compressor development with alternative refrigerants. It is found that compressors with alternative refrigerants, HFC 134a or HC600a give better COPs than those with CFC12 under the same operating conditions and especially, compressors with HC600a show better reliability and noise characteristics also.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2008년도 정기 학술대회
• /
• pp.301-306
• /
• 2008

The present seismic analysis of Road-Bridge Design Standard is on a basis of load-vased analysis which lets structures have the strength over load. In this study, the capacity spectrum method, a kind of displacement based method, which is evaluated by displacement of structure, is presented as an alternative to the analysis method based on load. Seismic capacity is performed about the existing reinforced concrete pier which has already secured seismic design by capacity spectrum method. As a result, capacity spectrum method could realistically evaluate the non-elastic behavior of structures easilly and quickly and the displacement of structures for variable ground motion level. And it could efficiently apply to an evaluation of seismic capacity about the existing structures and a verification of design for capacity target of the structure. We propose the seisemic performance method by using the Finite Element Analysis Program.

• 대한예방한의학회지
• /
• 제18권3호
• /
• pp.23-39
• /
• 2014

Objective : This review aims at analyzing Complementary and Alternative Medicine (CAM) therapies, using for oral health to know current use of CAM in dental area by analyzing randomized controlled clinical trials (RCTs). Method : We searched the following 6 electronic databases until 1 July 2014. : Pubmed, Medline, Embase, Allied and Complementary Medicine Database(AMED), Cumulative Index to Nursing and Allied Health Literature(CINAHL), the Cochrane Library. We included parallel RCTs and cross-over RCTs that assessed the efficacy of CAM regardless of blinding and language. Results : A total of 154 RCT articles were included. There were 2-arm parallel study design(69.5%), 3-arm parallel study design(20.8%), 4-arm parallel study design(4.5%) and Cross-over design(5.2%). Complementary and alternative medicine RCTs in oral health tend to increase in the early-2000s and in the mid-2010s. In addition, 154 citations were classified according to diseases and interventions that categorized Natural Products studies(68.2%), Mind and Body Practices studies(31.8%). We classified in detail that vitamin and mineral therapies(29.9%), dietary supplements(24.7%), acupuncture(23.3%), Herbal medicine(13.6%), homeopathy (2.6%), energy therapies(2.6%), Massage(1.9%), biofeedback(0.6%), traditional medicine(0.6%). Conclusion : Increasing publications and diverse interventions regarding CAM for oral health is observed by analyzing RCTs from the literature review. Further studies are needed to be performed as systematic reviews to verify their effectiveness and the research to inquire into side effect.

• Journal of the Korean Data and Information Science Society
• /
• 제14권4호
• /
• pp.939-950
• /
• 2003

Control charts are very useful tool for monitoring of process characteristics. This paper discusses the problem of design of control limits when the subgroups are composed by cluster sampling type. As an alternative method of design of control limits XbBar chart is proposed, which uses the control limits based on the variation between subgroups instead of using classical variation within subgroups. Two examples are presented for reasonable design of control limits and conditions of subgroups based on the cluster sampling. Through examples the guidelines for making proper control limits are proposed.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 가을 학술발표회 논문집
• /
• pp.96-103
• /
• 2002

In this study, design concepts of Seoul Subway Construction (901∼914) are reviewed in relation to the cases for temporary soil support wall systems which are revealed in highly developed design competitions such as Turnkey and Alternative based on. Especially soil and rock properties, various design schemes for dealing with soil and water pressures, new technology adopted etc are discussed very profoundly and broadly for the better understanding and additional clues for constructing new design technologies.