• 문화기술의 융합
• /
• 제9권1호
• /
• pp.605-611
• /
• 2023

본 연구에서는 자연환경에 영향을 주는 에너지를 절감하기 위해 피복아크용접에서 가동철심형 용접기와 전력사용량이 적은 디지털 용접기(인버터 방식)를 비교하여 전력 사용은 적으며 용접성은 동일한 조건을 갖춰야 하는 부분을 확인하고자 한다. 가동철심형 용접기는 정현파를 출력하는 교류를 사용하며 디지털 용접기 또한 정현파 교류를 발생시켜 동일 조건을 갖추고 전력사용량은 적으며 같은 용접성을 갖추어야 한다. 다만 용접성은 다양하게 검증할 수 있으나 국가기술자격 용접 분야의 자격시험으로 한정하여 분석하고자 한다.

• 비파괴검사학회지
• /
• 제16권3호
• /
• pp.162-173
• /
• 1996

본 연구는 강편 빌레트의 표면 결함을 검출하기 위한 건식 자분 탐상에 관한 것으로 자분 탐상능을 대상체에 흘리는 자화 전류, 대상체의 온도, 자분의 총 분사량 등에 대하여 평가하였다. 선재 제품의 등급에 따라 필요로 하는 몇 가지 강종을 선택하여 강종별 자기적 특성을 평가하였으며, 이를 입력 자료로 하여 유한 요소법에 의한 자기 해석을 행하였고, 그 결과를 직류 자화 전류에 의한 누설 자속 측정 결과와 비교 분석하였다. 교류 자화 전류에 의한 건식 자분 탐상능을 직류 자화 전류에 의한 탐상능과 비교하여 강종 및 자화 전류의 유형에 따른 자화 전류치를 결정하였다. 직류 자화 전류에 의한 자분 탐상 결과를 유한 요소법에 의한 계산과 비교하였고, 빌레트의 표면과 표면 결함 부위에서 측정한 누설 자속으로 비교 결과를 평가하였다. 각 강편재의 경우 직류 자화 전류에 의한 표면 자장은 그 형상에 의한 영향으로 코너 부위에서는 면 중앙의 표면 자장치에 비해 30% 정도였으며, 교류 자화 전류에 의해서는 그 비율이 70% 정도였다. 교류 자화 전류는 코너로부터 면중앙으로 10mm 되는 영역을 제외하고는 전 면에서 균일한 표면 자장을 발생하였다. 대상체의 온도에 따른 자분의 흡착은 대상체의 온도 $150^{\circ}C$ 까지는 큰 변화가 없으나 자분의 고착에 있어서 $60^{\circ}C$ 이상의 고온재에 대해서는 융착 용매로 메틸렌 크로라이드를 사용하는 것이 부적합하였다. 자분의 총분사량은 자분 탐상능에 상당히 큰 영향을 미침을 확인하였고 이에 대한 정량적 평가를 행하였다.

• Journal of Power Electronics
• /
• 제18권4호
• /
• pp.1268-1277
• /
• 2018

A relatively high operating frequency is required for efficient wireless power transfer (WPT). However, the alternating current (AC) resistance of coils increases sharply with operating frequency, which possibly degrades overall efficiency. Hence, the evaluation of coil AC resistance is critical in selecting operating frequency to achieve good efficiency. For a Litz wire coil, AC resistance is attributed to the magnetic field, which leads to the skin effect, the proximity effect, and the corresponding conductive resistance and inductive resistance in the coil. A numerical calculation method based on the Biot-Savart law is proposed to calculate magnetic field strength over strands in Litz wire planar spiral coils to evaluate their AC resistance. An optimized frequency can be found to achieve the maximum efficiency of a WPT system based on the predicted resistance. Sample coils are manufactured to verify the resistance analysis method. A prototype WPT system is set up to conduct the experiments. The experiments show that the proposed method can accurately predict the AC resistance of Litz wire planar spiral coils and the optimized operating frequency for maximum efficiency.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제54권10호
• /
• pp.461-469
• /
• 2005

In this paper, a double-excitation type single sheet tester is developed to measure the magnetic characteristics of the electrical steel sheets. The developed system has the uniform magnetic field area of 20$\times$20mm$^{2}$, and can be applied to the measurement of the magnetic characteristics of the Non-oriented and Grain oriented electrical steel sheets. In the developed system, the magnetic flux density and magnetic field intensity are measured by using B-coil and H-coil, respectively. The B-coil has 1 turn search coil for each direction, and H-coil has 640 and 640 turns for rolling direction and transverse direction on the Im thickness Glass-Epoxy basement, respectively. Through experiments, it Is shown that the system can measure the magnetic characteristics up to 1.87 of magnetic flux density in the rolling direction in case of the Grain oriented electrical steel sheet. The measured results are compared with those measured in Okayama university, .Japan.

• Macromolecular Research
• /
• 제14권2호
• /
• pp.209-213
• /
• 2006

The ring-opening polymerization of D,L-lactide initiated by tin(II) 2-ethylhexanoate $(Sn(Oct)_2)$ on the surface-initiated magnetite $(Fe_{3}O_4)$ nanoparticles was performed at $130^{\circ}C$. The effects of the polymer molar mass and concentration on the amount of surface polymer were investigated. The number average molecular weights, $M_n$, obtained by both NMR and GPC methods fit well within the accuracy of the applied methods and ranged from 1,100 to $4,040g\;mol^{-1}$. A surface functionalization density of up to 625 initiation sites per particle was obtained. The composition of various core-shell particles was determined by TGA, with results indicating magnetite $(Fe_{3}O_4)$ contents, ${\mu}m$, between 17 and 59 wt%. Under the influence of a magnetic field, the heating generated by superparamagnetic core-shell particles suspended in toluene presented guidelines for an optimization of magnetic particle systems with respect to an application for hyperthermia.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2006년 제4회 한국유체공학학술대회 논문집
• /
• pp.175-176
• /
• 2006

Electrowetting is prevailing for its various applicability on lap-on-a-chip, and MEMS devices, such as a pump, lens, micro-actuator in the micro-TAS technology. In the usual electrowetting, an AC power is preferred to DC practically. The AC electric field delays the contact angle-saturation, decreases the hysterisis, and is more stable in the view point of dielectric strength. But researches for AC electric field on electrowetting have not been reported very much yet. The different effect of AC on the electrowetting system, especially the effect of a frequency needs to be understood more concretely. In this work, the usual system for electrowetting, water droplet on the dielectric coated electrode (EWOD) is analyzed. Experimental study on the response of contact angles on input frequencies is performed. The simple circuit-model for EWOD system is considered to explain the experimental results. For more concrete understanding, the system is analyzed numerically, where simple AC-conduction model is used. Wetting tensions are analyzed under various input frequency to excavate the experimental results for the responses of the system on input frequencies.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2006년도 추계 학술대회논문집
• /
• pp.167-176
• /
• 2006

In this paper we show that solutions of the nonlinear Nernst-Planck equation possesses the quadruple-layer structure near the interface when the electrolyte receives a high frequency forcing such as a high-frequency alternating current. Very near to the interface wall, the well-known, classical Stern layer exists. Near to the Stern layer we have the secondly thin layer (to be called inner layer in this paper) where the ion concentrations behave under the same frequency as the external forcing. However, in this layer, the positive and negative ion concentrations develop with the time phase 180-degree different from each other. Next to this second layer, we have the third layer (called middle layer) in which two ion concentrations change with the time period double the forcing, and both concentrations behave in the same time phase. In the outermost layer, i.e. the forth layer, (called outer layer) the ion concentrations show the same-phase development as the third one but decaying very slowly in time. Our assertion is mostly based on the 1-D numerical simulation for the Nernst-Planck equation under a high frequency AC field assuming that the quadruple layer is very thin compared with the length scale representative of the bulk region.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2015년도 제51회 KOSCO SYMPOSIUM 초록집
• /
• pp.79-81
• /
• 2015

The experimental study on gasesous laminar free-jet flow was investigated by applying high voltage alternating current (AC) to the nozzle. The jet flows were affedcted significatly by AC electric fields particularly at high voltages for applied frequencies less than 80 Hz, while those were not responded to further increased frequencies. Under certain AC conditions of applied voltgae and frequency, the laminar gaseous fuel stem was broken down at an axial distance and subsequently separtaed into some parts. The velocity fields in jet flows interactiong with applied electric fields were compared with those without having electric field. Interaction of applying electric fields with laminar free jet flow was discussed in detail, and the possible mechanism was also explained.

• 한국초전도ㆍ저온공학회논문지
• /
• 제25권4호
• /
• pp.45-49
• /
• 2023

CORC, which is being studied as one of the conductors for large currents, is manufactured by symmetrically arranging several strands of high-temperature superconducting wires on a cylindrical former. It allows current to flow evenly between wires and has the advantage of being manufactured in a multi-layer structure to increase current capacity. In order to apply CORC to AC power devices, it is necessary to review the material of the former, which is the frame around which the superconducting wire is wound. In the case of metal formers, they are difficult to apply because eddy currents are generated in the former, and they do not have the flexibility to be manufactured into coils by winding them with CORC. In this paper, we compare and analyze the magnetization loss caused by an external alternating magnetic field of Litz wire, which is being considered as a former material for CORC, with the results from formers made of other materials. In addition, we experimentally examine the effect of reducing magnetization loss due to an external magnetic field in CORC using a split wire made by dividing a high-temperature superconducting wire into two using an etching method, and in CORC made with a non-split wire.

• 한국자기학회지
• /
• 제6권1호
• /
• pp.36-39
• /
• 1996

비정질 리본의 자기변형 측정을 위한 Fabry-Perot 간섭계형 광섬유 변위센서를 구성하였고, 헬름홀쯔 코일로써 교류자기장을 인가하여 자기변형을 측정하였다. 구성한 변위 센서의 출력신호는 구성요소인 index matching optical oil과 optical isolator의 사용에 의하여 잡음과 요동을 개선하였다. 구성한 변위센서의 분해능은 $30{\AA}$이었고, 이를 이용하여 1 Hz의 자화 주파수에서 측정한 비정질 $Fe_{81}B_{13.5}Si_{3.5}C_{2}$ 리본의 최대 자기변형 값은 인가자기장 $1.59{\times}10^{3}A/m$에서 $28{\times}10^{-6}$이였다.