• The Korean Journal of Quaternary Research
• /
• v.25 no.1
• /
• pp.1-13
• /
• 2011

To reinterpret the meaning of fluvial terraces in the Quaternary researches, the concepts and geomorphic properties of fluvial terraces are reviewed. Fluvial terraces are the alluvial landform that was once river channel or floodplain by paleochannel flowed in elevated areas from the current river by active incision of rivers due to the climatic changes and/or uplifts. As fluvial terraces are the remnants of alluviums after incisions of rivers, the major factors influencing on the incisions are the falling of erosion base, increase of river discharge and distinct geomorphic phenomenon of river. While it is generally known that fluvial terraces deposits in the upper or middle reaches of large rivers were formed during glacial periods, the deposits may be formed at the various periods due to the diverse natural environments and geomorphic properties of specific rivers, because there have been numerous cases that the ages of fluvial terraces in the upper or middle reaches of large rivers in Korea and China can be correlated to the interglacial periods.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2006.03a
• /
• pp.147-152
• /
• 2006

In this study, we examined the applicability of three-dimensional electrical resistivity survey to detect underground cavities of ground subsidence area at the field test site, located at Yongweol-ri, Muan-gun in Korea. Underground cavities are widely present within the limesilicate bedrock overlain by the alluvial deposits in the area of the test site where the ground subsidences have occurred in the past. The limesilicate cavities are mostly filled with groundwater and clays in the test site. Thus, cavities have low electrical resistivity compared to the surrounding host bedrock. The results of the study have shown that the zones of low resistivity correspond to the zones of the cavities identified in the boreholes at the site, and that the three-dimensional electrical resistivity survey used are very effective to detect underground cavities.

• Geomechanics and Engineering
• /
• v.19 no.6
• /
• pp.543-554
• /
• 2019

İzmir Bay reserves high amount of residual alluvial deposits generated by Meles River at its stream mouth. These carried sediments with high water content and low bearing capacity are unsuitable in terms of engineering purposes. In-situ soil stabilization with deep soil mixing method is considered to improve properties of soil in this location. This method is widely used especially over Scandinavia, Japan and North America. Basically, the method covers mixing appropriate binder into the soil to improve soil profile according to the engineering needs. For this purpose, soil samples were initially provided from the site, classification tests were performed and optimum ratios of lime and cement binders were determined. Following, specimens representing the in-situ soil conditions were prepared and cured to be able to determine their engineering properties. Unconfined compression tests and vane shear tests were applied to evaluate the stabilization performance of binders on samples with different curing periods. Scanning electron microscope was used to observe time-dependent bonding progress of binders in order to validate the results. Utilization of 4% lime and 4% cement mixture for the long-term performance and 8% lime and 8% cement mixture for short term performance were suggested for the stabilization of Meles Delta soils. Development of CSH and CAH in a gel form as well as CSH crystals were clearly observed on SEM images of treated specimens.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2005.03a
• /
• pp.11-17
• /
• 2005

Along the Ulsan Fault System, many Quaternary faults have been reported and investigated with outcrop observation and trench excavation to clarify the neotectonic movements and fault parameters such as length, displacement, slip rate and recurrence interval. In the northern part of the Ulsan fault system, we have interpreted small scale(1:10,000) aerial photographs and extracted lineaments by geomophological features to select trench site. After precise field survey and tracing for lineaments, two trench sites at Galgokri, Gyeongju were selected on the lineament to elucidate the fault movement history. One is successful in finding faults but the other is not. In the Galgok-Chisil trench(3m(w) x 1.5m(d) x 10m(l)), very closed two Quaternary faults cut the alluvial deposits of which age shows about 10-3ka. More than three times of fault movements can be inferred by geologic structures and C-14 dating. Repeatedly fault movements had been occurred before 10 ka, between 10ka-4.9 ka, between 4.9-1.4 ka at Galgok-Chisil trench section.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2003.11a
• /
• pp.422-431
• /
• 2003

Helicopter-borne electromagnetic (HEM) systems were originally developed for the exploration of mineral deposits. The frequency range of a conventional HEM system for mineral exploration, however, is relatively low and so not invariably suitable for its application to the fields of civil engineering because of its poor resolution in the shallower part of the earth. A DIGHEM HEM system was acquired by Nippon Engineering, with the frequencies chosen by the senior author. The five frequencies range from 220 Hz (the lowest) to 137,500 Hz (the highest). These frequencies improve the resolution of materials in the shallower part while maintaining a depth of investigation of greater than 100 m. This paper describes six case histories of geological and geotechnical surveys for civil engineering using HEM. These case histories include HEM surveys for investigating landslide, an alluvial area, root selection of road construction, areas related to dam and tunnel construction, and the simultaneous joint inversion of HEM and CSAMT data for a deep tunnel. These survey results show that HEM has sufficient resolution in both horizontal and vertical directins to contribute significantly to outlining the regional geology and its engineering problems.

• 한국석유지질학회:학술대회논문집
• /
• autumn
• /
• pp.47-56
• /
• 2000

The northwestern part of Kyongsang Basin largely comprises interbedded sandstone and mudstone with local conglomeratic deposits in the basin margin, representing marginal alluvial fans and fluvial depositional environments. The non-marine successions are divided into successive stratigraphic units, each of which is unique in facies assemblages and architecture of sandstone bodies. Two stratigraphic units, i.e., Sinpyong-Anpyong and Jotap units are examined in terms of stratigraphic architecture and its causative processes. Detailed architectural analysis reveals that the channel systems of Sinpyong-Anyong unit were of braided patterns, whereas those of Jotap unit were dominated by small-scale bedforms. The difference in fluvial styles can be attributed to the changes in amount and caliber of sediment load and water discharge, which might have been ultimately governed by basin tectonics, climate, and base level. Along with the marked change in fluvial style, the two successive units show repeated expansions of distal, water-logged floodplains and lacustrine facies in the basal and uppermost parts of Sinpyong-Anpyong unit, where the proportion of channel sandstone bodies is relatively low. These stratigraphic intervals are succeeded by the sequences with proximal, well-drained floodplain facies and relatively coarser-grained channel sandstone bodies of higher proportion, reflecting the progradation of proximal systems (the middle part of Sinpyong-Anpyong unit and Jotap unit). The overall stratigraphic architecture can be ascribed to the fluctuations in accommodation space and sediment supply induced by repeated basin subsidence.

• Journal of The Geomorphological Association of Korea
• /
• v.24 no.3
• /
• pp.47-59
• /
• 2017

This study aims to analyze geomorphologically Jaein Falls in Hantangang Lava Plateau for the landform structure, landform classification, falls dissection and recession. The height and recession length of the Falls are approximately 18m and 340m. after dissection valley arrive at area of the Jijangbong Volcanic Rock Complex of Mesozoic era, the fall will disappear. The structure of the dissection valley shows totally well vertical columnar joint near falls and plunge pool, colluvial talus deposits toward lower reach by the freezing-thawing and wet-dry activities, and alluvial cone and delta in estuary to Hantangang River. The Falls' age date and recession rate in the valley maybe relate to the age of the lava plateau. The estimated recession rate of the fall should be 8.75m/ka to 2.3m/ka, depending on the age 500ka to 40ka in lava plateau.

• Proceedings of the SAREK Conference
• /
• 2006.06a
• /
• pp.209-214
• /
• 2006

In this study, application of groundwater thermal energy by use of riverbank filtration(RBF) system is reviewed and checked as an energy resources. Also, the cooling and heating system using RBF was developed in Chang-Won Waterwork site to examine the feasibility in real operation of the system. We estimates the roughly overall energy obtained from RBF system if the system is used in cooling and heating. The water temperature and room temperature have been monitored to evaluate the efficiency of the system and the preliminary results show that the geothermal energy obtained by RBF could be adopted in cooling and heating energy source efficiently.

• Economic and Environmental Geology
• /
• v.50 no.6
• /
• pp.445-466
• /
• 2017

Yeongdong area is located in the contact zone between central southeastern Ogcheon belt and Yeongnam massif, in which Cretaceous Yeongdong basin exists. Therefore, the study area has complex geological environment of various geological age and rock types such as Precambrian metamorphic rocks, age-unknown Ogcheon Supergroup, Paleozoic/Mesozoic sedimentary rocks, Mesozoic igneous rocks and Quaternary alluvial deposits. This study focuses on the link between the various geology and water type, and discussed the source of some major ions and their related water-rock interaction. For this study, the field parameters and ion concentrations for twenty alluvial/weathered and eighty bedrock aquifer wells were used. Statistical analysis indicates that there was no significant differences in groundwater quality between wet and dry seasons. Although various types were observed due to complex geology, 80 to 84 % of samples showed $Ca-HCO_3$ water type. Some wells placed in alluvial/weathered aquifers of Precambrian metamorphic and Jurassic granitic terrains showed somewhat elevated $NO_3$ and Cl concentrations. $Mg-HCO_3$ typed waters prevailed in Cretaceous Yeongdong sedimentary rocks. The deeper wells placed in bedrock aquifers showed complicated water types varying from $Ca-HCO_3$ through $Ca-Cl/SO_4/NO_3$ to $Na-HCO_3$ and Na-Cl type. Groundwater samples with $Na-HCO_3$ or Na-Cl types are generally high in F concentrations, indicating more influences of water-rock interaction within mineralized/hydrothermal alteration zone by Cretaceous porphyry or granites. This study revealed that many deep-seated aquifer had been contaminated by $NO_3$, especially prominent in Jurassic granites area. Based on molar ratios of $HCO_3/Ca$, $HCO_3/Na$, Na/Si, it can be inferred that Ca and $HCO_3$ components of most groundwater in alluvial/weathered aquifer wells were definitely related with dissolution of calcite. On the other hand, Ca and $HCO_3$ in bedrock aquifer seem to be due to dissolution of feldspar besides calcite. However, these molar ratios require other mechanism except simple weathering process causing feldspar to be broken into kaolinite. The origin of $HCO_3$ of some groundwater occurring in Cretaceous Yeongdong sedimentary rock area seems to be from dissolution of dolomite($MgCO_3$) or strontianite($SrCO_3$) as well.

• The Korean Journal of Petroleum Geology
• /
• v.7 no.1_2 s.8
• /
• pp.28-34
• /
• 1999

The Cretaceous Poongam sedimentary Basin in Kangwon-do, Korea consists alluvial deposits of conglomerates, sandstones, mudstones or siltstones, and volcaniclastics. The Poongam Basin was formed as a fault margin sag or a transpressional basin developed along a strike-slip fault zone, and received huge amount of clastic sediments from the adjacent fault-scaip. It formed an aggrading alluvial fan system and a volcaniclast-supplied marginal lake environment, while tectonic activity and volcanism attenuated toward the end of basin formation. Following the Folk's classification, the sandstones of the Poongam Basin are identified as lithic wackes or feldspathic wackes. The areal and sequential variation of the mineral composition in the sandstones is not distinct. The results of K-Ar age dating from the intruding andesites, volcaniclastics and volcanic fragments in sedimentary rocks show a range of 70 Ma to 84 Ma. It suggests that volcarism occurred sequentially within a relatively short period as the pre-, syn-, and post-depositional events. It was the short period in the late Cretaceous that the basin had evolved i.e., the basin formation, the sediment input and fill, and the , intrusion and extrusion of volcanic rocks occurred. The Poongam sedimentary sequence is a typical tectonic-controlled coarse sedimentary facies which is texturally immature.