• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.11a
• /
• pp.101-103
• /
• 2000

Research for the synthesis of high-temperature polymers by the Photochemical method has been carrying out. The use of cheap and available compounds (viz. benzene, its alkyl, aryl and halogen substitutes, furan and maleic anhydride) subject to ultra violet irradiation resulted in a single stage quantitative yield of about 40 new polymers: polyimide films, enamel insulation, molding materials. At present experimental ＆ industrial lots of wire have been produced. Polymer insulation possesses temperature exploitation range (from -l00$^{\circ}C$ to +300$^{\circ}C$) without significant changing of properties. As a result, new polyimide lacquers for production of a wide number of technical articles, such as polyimide films, fibers, enamel-wires, press-materials have been synthesized. An application field of the polyimides in membrane technology, printing plate and optic electronics manufactures has been outlined.

• Korean Journal of Microbiology
• /
• v.18 no.4
• /
• pp.155-160
• /
• 1980

Microorgansims utilizing anionic detergent as their carbon and sulfur sources were isolated from soils and sewages. Alkyl benzene sulfonate (Hiti) and sodium dodecyl sulfonate (SDS) were the detergent compound tested. Three of these isolated microorganisms were identified as Pseudomonas spp. and the others asKlbsiella, Enterobacter and Acinetobacter. Biodegradation rate of the detergents and growth rate of Acinetobacter Strain II-8, Pseudomonas strain H-3-1 and 554 among six isolated microorganisms were investigated with colorimetric, warburg manometric, and ultraviolet absorption analyses. By performance of 4 serial successive tranfer to new culture broth for the purpose of adaptation method, ABS and SDS could be degraded to far more than 40%-60% and 70%-75%, respectively. However the employment of nonadaptation method, ABS and SDS were degraded to 30%-45% and 45%-65%, respectively. In another words, detergents degradation ability was increased to a certain extent by successive transfer to the new minimal media. We would conclude that the development of adaptation was effective in the removal of recalcitrant compounds.

• Applied Chemistry for Engineering
• /
• v.31 no.4
• /
• pp.429-437
• /
• 2020

In this study, a cationic gemini surfactant was synthesized using isosorbide, in order to modify the alkyl chain length in the range of C₁₀~C₁₆. The c.m.c and surface tension of the synthesized cationic gemini surfactant were measured to be in the ranges of 5.13 × 10^-4~1.62 × 10^-4 mol/L and 31.86~37.41 dyne/cm, respectively. The surface tension increased with increasing the length of the alkyl group. In addition, as the area per molecule occupied by the surfactant adsorbed on the interface increased with the reduced extent of adsorption, the bubble generation at the air-water interface decreased. The emulsifying capacity in benzene was maintained above 60 ± 5% after 8 h while that in soybean oil tended to decrease above 50 ± 5%. The performance was superior in benzene, a highly hydrophobic substance, and the emulsion stability was shown to be consistent beyond 1 h during the preparation of pre-emulsion in oil and water. The antimicrobial activity was dependent on the length of the hydrophobic chain of the synthesized cationic gemini surfactant due to the increased size of the clean zone in Escherichia coli (E.coli) and Staphylococcus aureus.

• Journal of the Korean Applied Science and Technology
• /
• v.34 no.2
• /
• pp.203-209
• /
• 2017

The propenyl ether-type monomers which are applicable for cationic photo-polymerization were synthesized by the condensation reaction of mono and di-functional alcohol with allyl bromide. To examine photo-curable reactivity, these monomers were combined with cationic photoinitiator to prepare coating composition. As a result, the initial rate of polymerization of POMB in mono propenyl ether type was 10.2, which was relatively lower than BPOB in di-propenyl ethers type. However, POMB containing 1.5mol% photoinitiator almost quantitatively reacted within 90 seconds. In addition, Sulfonium salt type photo-initiators containing long-alkyl group showed good solubility with monomers and apperaed to have comparatively higher rate of polymerization and conversion ratio when applying DPSA and DPST which have high acidity on all monomers.

• Journal of the Korean Wood Science and Technology
• /
• v.46 no.1
• /
• pp.1-9
• /
• 2018

Nowadays, synthetic resin varnish such as cashew nut shell liquid (CNSL) is being used as well as traditional lacquer. The code of ethics states that material must be identical to the original when preserving cultural heritage. Therefore, lacquer should be used. However, problem is that even experts have difficulties differentiating lacquer and CNSL as they have similar components. Therefore, this study was carried out to identify the difference between lacquer and CNSL using IR and Py-GC/MS. As a result of IR, in lacquer, $720cm^{-1}$ peak was detected and in CNSL, $750cm^{-1}$, $720cm^{-1}$ and $700cm^{-1}$ peaks were detected. The results of Py-GC/MS detect benzene compounds and alkyl chains for both varnishes. However, hexanoic acid was detected from CNSL but not lacquer. Using these analytical methods, the differences between lacquer and CNSL can be identified on the scene. This is expected to be applied to the authentic conservation and restoration of lacquerware.

• Journal of the Korean Applied Science and Technology
• /
• v.5 no.1
• /
• pp.41-51
• /
• 1988

Aliphatic aldehyde polyoxyethylene glycol acetals were synthesised through the reaction of aliphatic aldehydes such as caproic aldehyde, capryl aldehyde, capric aldehyde and lauric aldehyde with excess diethylene glycol, triethylene glycol and tetraethylene glycol, respectively. The acetal formation, in which water was azeotropically distilled by adding benzene to the reaction system, was gained a good yield of acetal type compounds. This reaction is found pseudo first order reaction at various temperatures such 70, 80, 90 and $97^{\circ}C$. Also these activation energies of reaction of acetal type products such as caproic aldehyde diethylene glycol acetal, capryl aldehyde diethylene glycol acetal, capric aldehyde diethylene glycol acetal, lauric aldehyde diethylene glycol acetal, caproic aldehyde triethylene glycol acetal and caproic aldehyde tetraethylene acetal were 17.3, 19.6, 21.2, 21.6, 15.5 and 14.7 Kcal/mole.

• YAKHAK HOEJI
• /
• v.21 no.4
• /
• pp.193-199
• /
• 1977

ABS, Alkyl benzene sulfonate, persists for long periods in stream because of its resistance to biologic degradation. Its bio-degradation is very varied in the environments. This investigation was therefore undertaken in order to know the biodegradation of synthetic detergents which are comprising soft and hard forms from February 1976 to September 1976. The biodegradations by spontaneuos settling and aeration were determined. The reduction rates of ABS, DBS, and LAS were 9.8%, 13.7% and 10.4% by the settlings for 5 days at $25^{\circ}$ and 63.3%, 27.2%, and 43.9% by aeration respectively. It was not contributed effectively to biodegradate the synthetic detergents by the simulaneous incubation with micro-organisms isolated from sewage such as Enterobacter sp., E. coli, Bacillus sp., Flavobacterium sp., Pseudomonas sp., Staphylococcus sp., and etc. Tricking filter could also eliminate some amount of detergent. By the application of this investigation, it could be designed that detergents would be regulated in abuse in context with water pollution and be treated at a proper process in the sewage treatment plant to be installed.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.16 no.2
• /
• pp.150-157
• /
• 2004

Carbon dioxide ($CO_2$, R-744) has become a very popular issue in application to refrigeration and air conditioning systems as a natural refrigerant. An experimental study has been carried out to investigate miscibility and the vapor pressure of refrigerant R-744 in the presence of lubricant oil. This is of particular interest in the selection of the lubricant oil for the compressor of a refrigeration system or an air conditioning system using the refrigerant R-744. The experimental set-up consists of the equilibrium cell, measuring devices, the vacuum pump, the constant temperature bath and relevant connecting pipes made of stainless steel. Five lubricant oils, such as mineral oil (Naphthenic), AB (Alkyl Benzene) oil, PAO (Poly Alpha Olefin) oil, PAG (Poly Alkylene Glycol) oil and POE (Polyol Ester) oil are considered in the present study. Test runs were conducted with the oil concentration range from 5 to 50 wt％, and the temperature range from -10 to 1$0^{\circ}C$ with 2$^{\circ}C$ intervals. The miscibility results are visualized and correlated with the vapor pressure for the individual test components.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.10
• /
• pp.2791-2796
• /
• 2010

In the present study, we constructed a membrane inlet assembly for selective permeation of volatile airborne organic compounds for subsequent analysis by time-of-flight mass spectrometry. The time-dependent diffusion of analytes through a $75\;{\mu}m$ thick polydimethylsiloxane membrane was measured by monitoring the ion signal after a step change in the sample concentration. The results fit well to a non-steady-state permeation equation. The diffusion coefficient, response time, and sensitivity were determined experimentally for a range of polar (halogenated) and nonpolar (aromatic) compounds. We found that the response times for several volatile organic compounds were greatly influenced by the alkyl chain length as well as the size of the substituted halogen atoms. The detection limits for benzene, ethylbenzene, and 2-propanol were 0.2 ppm, 0.1 ppm, and 3.0 ppm by volume, respectively, with a linear dynamic range greater than three orders of magnitude. These results indicate that the membrane inlet/time-of-flight mass spectrometry technique will be useful for a wide range of applications, particularly for in situ environmental monitoring.

• Applied Biological Chemistry
• /
• v.31 no.3
• /
• pp.234-240
• /
• 1988

Some chloroacetamide derivatives were synthesized from 2,6-dialkyl, aniline 4-chloroaniline, or 3,4-dichloroaniline with alkyl 2-bromopropionate and chloroacetyl chloride and identified by elemental analyses, NMR, and GC/MS spectra as N-(1'-methoxycarbonylethyl)-N-chloroacetyl-2,6-dimethylaniline(ACRI-S-8609), etc. These compounds synthesized were subjected to the test for pre-emergence herbicidal effecs on some grass weeds(Digitaria adscendens, Setaria viridis, Echinochloa crus-galli) and broad leaf weeds(Portulaca oleracea, Amaranthus lividus, Chenopodium album) in pots applied as wettable powder formulations. It was found that N-(1'-ethoxycarbonylethyl)-N-chloroacetyl-2,6-dimethylaniline(ACRI-S-8701) has the highest herbicidal effect on grass weeds, which corresponds to a 95% control effect at an application of 200g a.i/10a. Whereas, some chloroacetamide derivatives derived from 4-chloroaniline or 3,4-dichloroaniline had very weak herbicidal effects on grass and broad leaf weeds.