• Journal of Adhesion and Interface
• /
• v.7 no.2
• /
• pp.1-11
• /
• 2006

Interfacial evaluation of the untreated and treated Jute and Hemp fibers reinforced different matrix polypropylene-maleic anhydride polypropylene copolymer (PP-MAPP) composites were investigated by micromechanical technique and dynamic contact angle measurement. For the statistical tensile strength of Jute and Hemp fibers, bimodal Weibull distribution was fitted better than the unimodal distribution. The acid-base parameter on the interfacial shear strength (IFSS) of the natural fiber composites was characterized by calculating the work adhesion, $W_a$. The effect of alkaline, silane coupling agent on natural fibers were obtained with changing MAPP content in PP-MAPP matrices. Alkaline treated fibers made the surface energy to be higher due to removing the weak boundary layers and thus increasing surface area, whereas surface energy of silane treated Jute and Hemp fibers decreased due to blocked high energy sites. MAPP in the PP-MAPP matrix caused the surface energy to increase due to introduced acid-base sites. Microfailure modes of two natural fiber composites were observed clearly differently due to different tensile strength of natural fibers.

• Journal of Environmental Science International
• /
• v.2 no.1
• /
• pp.61-72
• /
• 1993

Result of this study indicate that two criteria must be met in order to have effective macrocycle-mediated transport in these emulsionsystem. First, one must effective extraction of the post transition metals, $Cd^{2+}$. $Pb^{2+}$ and $Hg^{2+}$ , into toluene membrane. The effectiveness of this extraction is greatest if log K values for the metal-macrocycle interaction is large. Second, the ratio of the log K values for the metal ion-receiving phase to the metal ion-macrocycle interaction must be large enough to ensure quantitative stripping of the metal ion at the toluene phase interface. Control of the first step can be obtained by appropriate selection of macrocycle donor atom, substituents, and cavity radius. The second step can be controlled by selecting the proper complexing agent for inclusion in the receiving phase. The order of the transport, when using the several $A^-$ species such as $SCN^-$, $1^-$, $Br^-$ and $Cl^-$ is the order of the changing degree of solvation for $A^-$ and the transport of the metals is also affected by the control of concentration for receiving species because of solubility-differences. In this study, we can seperate each single metal ion from the mixture of $Cd^{2+}$, $Pb^{2+}$, and $Hg^{2+}$ ions by using the toluene membranes controlled by optimized conditions. Transport of the single metal is also very good, and alkaline and alkaline earth metals as interferences ions did not affect the seperation of the metals in this macrocycle-liquid membrances but transition metal ions were partially affected as interferences for the post transition metal ions.

• Polymer(Korea)
• /
• v.29 no.5
• /
• pp.501-507
• /
• 2005

Small intestinal submucosa (SIS) had been widely used as a biomaterial without immune rejection responses. SIS sponges prepared by crosslinking with 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide hydrochloride (EDC). SIS powders dissolved in $3\%(v/v)$ acetic acid aqueous solution for 48hrs and freeze-dried. EDC solution ($H_2O$ : ethanol = 5 : 95) as a crosslink agent was used in concentration of 100mM. In vitro, rat-BMSCs seeded in SIS sponges and induced the osteogenesis for 28 days. We have characterized the osteogenic potential of rat-BMSCs in SIS sponges by alkaline phosphatase activity(ALP), n assay, SEM and RT-PCR for osteogenic phenotype. In SEM, all morphology of SIS sponges was regular and showed interconnected pore structure. By RT-PCR analysis, we observed type I collagen expression. These results demonstrate osteogenic differentiation of rat-BMSCs. In conclusion, we confirmed that the morphology of surface, cross-section, and side of SIS sponges were highly porous with good interconnections between each pores, which can support the surface of cell growth, proliferation, and differentiation. This result indicates that SIS sponge is useful for osteogenesis of BMSCs.

• Resources Recycling
• /
• v.29 no.1
• /
• pp.17-24
• /
• 2020

In this study, rare earth elements (REE) leaching from a refractory REE ore containing goethite as a major gangue mineral was conducted, introducing a two-stage method of chemical decomposition-acid leaching. At the chemical decomposition step, using one of alkaline agent, NaOH, the ore was decomposed, changing NaOH concentration from 20 to 50 wt% at 10% (w/w) of pulp density and the maximum temperature achieved without boiling at each NaOH concentration. With increasing NaOH concentration, light REE (Ce, La and Nd) and iron were concentrated in the solid phase which is the decomposed product, while aluminum (Al) and phosphorus (P) were removed to the liquid phase, and their concentrations in the solid phase were down to 0.96 and 0.17%, respectively. In addition, through XRD analysis, it was found that the crystallinity of goethite was considerably decreased. At the acid leaching step, the product decomposed by 50 wt% NaOH was leached at 3.0 M HCl and 80 ℃ for 3 hr, then the REE leaching efficiency was above 94% (Ce 80%), and the leaching efficiencies of Al and P were decreased to 12 and 0%, respectively. Therefore, in terms of both REE leaching efficiency and impurity removal, those decomposition and leaching conditions were chosen as optimum processing methods of the investigated material. In terms of REE leaching mechanism, because REE and iron leaching efficiencies showed the positive correlation each other, so it can be concluded that decreasing crystallinity of goethite affect the improvement of REE leaching.

• Korea Science and Art Forum
• /
• v.30
• /
• pp.251-261
• /
• 2017

Metal is a material that has exerted a lot of influence on the development of human cultures, and has closely connected with our life from the past to the present. Types of metal we have used from the prehistoric times are varied, and iron relics take the largest percentage of metal relics excavated in our country. The biggest threat to the existence of iron relics ranging from excavated relics to the ones that are transmitted is the process of corrosion, and physical removal has been used the most for removing corroded oxides. For details for removal of corrosion oxides, this thesis aimed to research on the chemical corrosion oxides remover that protects parent material of iron relics but treats corrosion oxides only. For safe and effective removal of corrosion oxides of iron relics, this study was conducted aiming at finding the possibility of and optimized composition for removal of iron relics corrosion oxides by manufacturing new acid, alkaline and neutral oxides removers and changing their composition variously, exploring the possibility by applying the agents to modern relics. The results of this study are as follows: First, the acid solution removed only some part of corrosive substance oxidized on the surface of metal specimen. Second, the application of each of alkaline and neutral solution resulted in remaining black-colored corrosive substance, but it was removed when the quantity of the solution and the duration of application are increased. Third, All the three solutions did not cause any damage to parent material in the course of application, and showed the result that they are capable of removing unstable oxide layer while protecting parent material and stable corrosive layer as the solutions would be able to deal with situation by a relic only through the control of concentration of solution and duration of application.

• Korean Journal of Food Science and Technology
• /
• v.45 no.5
• /
• pp.545-549
• /
• 2013

Liquid paraffin is a mixture of heavier alkanes derived from petroleum. It can be used as a lubricant in processing machinery, as a coating agent, or as a releasing agent. The purpose of this study was to analyze liquid paraffins in foods by using a gas chromatography-flame ionized detector (GC-FID). Liquid paraffin was extracted from the food samples using n-hexane. Non-polar aromatic or olefinic co-extractives were removed by alkaline permanganate oxidation followed by clean up on an aluminium oxide SPE cartridge before the GC-FID analysis. The results of recovery tests were 91.5-103.2%. Based on this optimized method, we investigated the amount of liquid paraffin in various food samples purchased from domestic markets. The levels of liquid paraffin in bread were $95.5{\pm}156.0$ mg/kg (0.008%), those in capsules were $40.2{\pm}54.5$ mg/kg (0.001%), and those in dried fruits and vegetables were $3.0{\pm}18.1$ mg/kg (0.0001%). No liquid paraffin was detected in fresh fruits and vegetables. We propose that our method can be used to monitor and detect liquid paraffin in foods for food safety management.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.12
• /
• pp.1963-1970
• /
• 2008

Natural indigo dye in powder form was prepared by modifying traditional Niram method, using $Ca(OH)_2$ instead of baked oyster powder for precipitating indigo dye. The prepared dye was applied to dyeing Tencel fabrics to investigate the effect of experimental conditions for the optimization of dyeing process. The indigo dye powder contained 15.2%(w/w) of indigo content and 0.757%(w/w) of indirubin content on the basis of HPLC analysis. Maximum dye uptake was obtained at $60^{\circ}C$ for 20min. Almost saturated dye uptake was obtained at 2g/L of sodium hydrosulfite concentration up to 4g/L of indigo dye and then slowly increased for further increase of sodium hydrosulfite. Whereas at higher indigo dye concentration(8g/L) more than 3g/L of reducing agent concentration was required for obtaining the maximum dye uptake. At the same indigo dye and reducing agent concentration, K/S value of the sample dyed without sodium hydroxide(pH 5.75) was 15.19, much higher than one dyed in alkaline condition(K/S 5.76). There was no difference in colorfastness ratings among samples with different color strength. However, more fading was occurred for the sample with low color strength.

• Imaging Science in Dentistry
• /
• v.36 no.4
• /
• pp.189-198
• /
• 2006

Purpose: To investigate the in vitro response of MC3T3-E1 osteoblastic cells to X-ray in the presence and absence of 2 deoxy-D-glucose (2-DG) and quercetin (QCT). Materials and Methods: The MC3T3-E1 cells were cultured in an ${\alpha}-MEM$ supplemented with 5 mM 2-DG or $10{\mu}M$ QCT and then the cells were incubated for 12 h prior to irradiation with 2, 4, 6, and 8Gy using a linear accelerator (Mevaprimus, Germany) delivered at a rate of 1.5 Gy/min. At various times after the irradiation, the cells were processed for the analyses of proliferation, viability, cytotoxicity, and mineralization. Results: Exposure of the cells to X-ray inhibited the tritium incorporation, 3-(4, 5-dimethylthiazol-2yl-)-2, 5-diphenyl tetrazolium bromide (MTT)-reducing activity, and alkaline phosphatase (ALP) activity, and caused cytotoxicity and apoptosis in a dose-dependent manner of the X-ray. This effect was further apparent on day 3 and 7 after the irradiation. RA+2-DG showed the decrease of DNA content, cell viability, and increase of cytotoxicity rather than RA. ALP activity increased on day 7 and subsequently its activity dropped to a lower level. 2-DG suppressed the calcium concentration, but visual difference of number of calcified nodules between RA and RA+2-DG was not noticed. RA+QCT showed the increase of DNA content, cell viability, but decrease of cytotoxicity and subG1 stage cells in the cell cycle, and increased calcified nodules in von Kossa staining rather than the RA. ALP activity showed significant increases on day 7 and subsequently its activity dropped to a lower level. Conclusion: The results showed that the 2-DG acted as a radiosensitizing agent and QCT acted as a radiosensitizing agent respectively in the irradiated MC3T3-E1 osteoblast-like cells.

• Environmental Mutagens and Carcinogens
• /
• v.21 no.1
• /
• pp.1-8
• /
• 2001

We have synthesized $^{99m}$Tc-mercaptoacetyltriglycine (MAG3)-biocytin as a new imaging agent for hepatobiliary scintigraphy. The aim of this study was to evaluate the usefulness of $^{99m}$Tc-MAG3-biocytin scintigraphy in differentiating carbon tetrachloride ( $CCl_4$)-induced hepatotoxicity from $\alpha$-naphthylisothiocyanate (ANIT)-induced cholestasis in mice, which reflecting the differential diagnosis of neonatal jaundice caused by neonatal hepatitis from congenital biliary atresia in humans. Methods: Balb/c mice (female, 20 g, n=4-6) were pretreated with $CCl_4$(0.5 or $1.0m\ell$/kg) and ANIT ($150 or 300 m\ell$/kg) 18 h before scintigraphy. Biochemical and histopathological examinations showed a pattern of typical acute hepatitis (increase of transaminases and hepatocellular necnsis) in $CCl_4$-treated mice and cholestasis (increase of alkaline phosphatase and ${\gamma}$-glutamyltransferase, and biliary hyperplasia) in ANIT-treated mice, respectively, Mice were fasted at least 4 hr prior to the intravenous injection of $^{99m}$Tc-MAG3-biocytin (18.5 MBq/20$\mu\textrm{g}$) in 2% human serum albumin in saline. Scintigraphy was performed with a ${\gamma}$-camera equipped with a 1-mm diameter pin-hole collimator for 30 min and images were acquired every 15 s. We compared the values of physical parameters, such as peak liver/heart ratio ($${\gamma}$_{max}$) and peak ratio time ($t_{max}$) far $^{99m}$Tc-MAG3-biocytin scintigraphy. Results: Scintigraphic parameters of the $CCl_4$-pretreated (0.5 $m\ell$/kg) group showed a 81.9% decrease of r$_{max}$, and 42.2% decrease of $t_{max}$, whereas the ANIT-pretreated ( $150m\ell$/kg) group showed a 53% decrease of $r_{max}$, and 2.36-fold increase of $t_{max}$, (P<0.05). These results demonstrate that the decrease of $r_{max}$ and the shortening of $t_{max}$ are characteristic features for hepatotoxicity, in contrast to the increase of $t_{max}$ and decrease of $r_{max}$ for biliary hyperplasia. Conclusion: $^{99m}$Tc-MAG3-biocytin hepatobiliary scintigraphy can distinguish hepatitis from cholestasis in mice model and may be similarly useful in humans which differentiating the cause of neonatal jaundice in clinical study.cal study.cal study.cal study.

• Journal of the Mineralogical Society of Korea
• /
• v.30 no.4
• /
• pp.205-217
• /
• 2017

Mineral carbonation by indirect method has been studied by serpentinite as cation source. Through the carbonation of $CO_2$ and alkaline earth ions (calcium and magnesium) from serpentinite, the pure carbonates including $MgCO_3$ and $CaCO_3$ were synthesized. The extraction solvent used to extract magnesium (Mg) was ammonium sulfate ($(NH_4)_2SO_4$), and the investigated experimental factors were the concentration of $(NH_4)_2SO_4$, reaction temperature, and ratio of serpentinite to the extraction solvent. From this study, the Mg extraction efficiency of approximately 80 wt% was obtained under the conditions of 2 M $(NH_4)_2SO_4$, $300^{\circ}C$, and a ratio of 5 g of serpentinite/75 mL of extraction solvent. The Mg extraction efficiency was proportional to the concentration and reaction temperature. $NH_3$ produced from the Mg extraction of serpentinite was used as a pH swing agent for carbonation to increase the pH value. About 1.78 M of $NH_3$ as the form of $NH_4{^+}$ was recovered after Mg extraction from serpentinite. And, the main step in Mg extraction process of serpentinite was estimated by geochemical modeling.