• Applied Chemistry for Engineering
• /
• v.21 no.3
• /
• pp.301-305
• /
• 2010

In this study, the alkaline degreasing agent was developed for electroplating pretreatment process, and the efficiency and the durability was predicted. The alkaline deeping degreasing agent was prepared by blending sodium hydroxide (NaOH), sodium carbonate ($Na_2CO_3$), sodium silicate ($Na_2SiO_3$), and sodium lauric sulfate (SLS). The performance tests of the degreasing agent were evaluated in the $40{\sim}50^{\circ}C$ of the degreasing temperature and 30~40 min of the degreasing time. The efficiency and durability of the prepared degreasing agent were tested by the waterdrop formation test and Hull-cell plating test. The optimum ratio of alkaline degreasing agent was NaOH (30 g/L) + SLS (6.0 g/L) + $Na_2SiO_3$ (2.0 g/L) + $Na_2CO_3$ (40 g/L). Also, the optimum degreasing conditions were $50^{\circ}C$ of the degreasing temperature and 35 min of the degreasing time.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2016.10a
• /
• pp.32-33
• /
• 2016

This purpose of this study is to find the properties of pore structure and length change of blast furnace slag cement added alkali powder stimulant on shrinkage reducing agent presence. In length change, the specimen added alkaline stimulant was smaller than normal blast furnace slag concrete. And the specimen added shrinkage reduction agent was confirmed to show smaller rate of length change than the length. In MIP analysis of 1day-age, 0.1㎛ subsequent pore amount of the specimen added alkaline stimulant was significantly smaller value the normal blast furnace slag concrete specimen.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.33 no.4
• /
• pp.42-48
• /
• 2001

The spent liquor (BSL) obtained from alkaline sulfite-anthraquinone (AS-AQ) cooking of pine bark was applied as a deinking agent. In the ONP deinking system, although BSL removed the small size of ink particles (${\geq}$$12.5{\mu}m$), it did not improve the brightness of pulp. The brightness of pulp slightly improved when treated with BSL at 150~$180^{\circ}C$. However, the brightness of the pulp was lower than that of a commercial deinking agent (oleic acid). It seems that BSL treated with a high temperature still had a high dispersing ability on the ink particles. Intensive oxidations were introduced, and remarkable deinking effects were observed at 13kgf/$cm^2$ oxygen pressure, $160^{\circ}C$ and 2h. When BSL treated at 13kgf/$cm^2$ oxygen pressure, $170^{\circ}C$ and a time period of 30~90 min is added to the pulp, at 0.1% or lower, the deinking effect became higher than that of oleic acid. On the other hand, additional alkali treatments during the oxidation possibility as a deinking agent when oxidized. However, since the oxidized BSL still has a high dispersing ability and lower molecular weight, several modifications need to be done in the near future in order to be applied as a high quality deinking agent.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.6 no.1
• /
• pp.1-12
• /
• 1998

To examine the possibility of protein recycling of shaving scraps containing chromium generated from manufacturing process of leather, the optimum hydrolysis conditions and the withdrawal methods of low molecular weight protein for using the liquid fertilizer sources by investigation of solubilities of hydrolyzed protein, inorganic nutrients contents and molecular weight distributions of hydrolyzed protein from shaving scraps treated with mixed alkaline inducing agents and mixed alkaline proteolytic enzymes including MgO were investigated. In hydrolysis of shaving scraps treated with mixed alkaline inducing agents, the solubility of shaving scraps were clearly different with 65~85% according to the sorts of the inducing agents, and the degree of hydrolysis was high in the order of NaOH, $Ca(OH)_2$ and KOH. The average molecular weights of withdrawal hydrolyzed protein were 10, 40 and 80 KD treated with NaOH, $Ca(OH)_2$ and KOH, respectively. And the chromium contents was about 15 ppm. In hydrolysis of shaving scraps treated with mixed alkaline proteolytic enzymes, the bility of shaving scraps were high in the order of alcalase, esperase and savinase. In c of treating 0.5% alcalase, the low molecular weight of hydrolyzed protein could be withdrawn. The solubility of the hydrolyzed protein was about 85%, the average molecular weight of the protein was below 1 KD and chrome content of the protein was below 10 ppm.

• Journal of Microbiology and Biotechnology
• /
• v.9 no.5
• /
• pp.568-571
• /
• 1999

Aspergillus oryzae U1521, which was a genetically engineered strain, produced 1,000,600 U per g . glucose of extracellular alkaline protease within 72 h in a submerged fermentation. However, the alkaline protease was not detected during the first 24 h. Northern blot analysis indicated that the enzyme synthesis was repressed at the transcriptional level during the lag period. Both catabolite repression and pH of the growth medium significantly affected the enzyme production. Use of this enzyme as a silver recovery agent from used X-ray film was confirmed by experiments in the shake-flask scale.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2006.11a
• /
• pp.15.2-15.2
• /
• 2006

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.33 no.2
• /
• pp.17-23
• /
• 2001

AKD sizing behavior of handsheets, which were prepared from the different pulps with various AKD fixing agents, was studied in this investigation. AKD sizing performance could be improved by removal of fines in the stock, minimizing damage of fiber, using a suitable fixing agent and heat treatment. Fillers with low surface energy, like calcium carbonate and talc, showed quite positive effect in AKD sizing. When PAM was added to the DIP stock as fixing agent, it showed lower sizing degree than polyamine did. But in case of NBKP system, PAM was more effective than polymine.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.06b
• /
• pp.451-454
• /
• 2006

This paper presents an overview of ONP deinking efficiency with cellulolytic enzymes and synthetic collector in alkaline pH. Deinking is a series of unit operations designed to detach ink from cellulose fibers and separate the dispersed ink from the pulp slurry. Deinking chemicals are process aids that enable expensive mill equipment used in these unit operations to operate more efficiently - often much more efficiently. We propose the blended deinking agent with cellulolutic enzymes and synthetic collector in deinking pulp of conventional alkaline method. The deinking efficiency of old news print in alkaline pH was enhanced with enzyme treatments. The brightness of deinked pulp was increased with less residual ink particles and yield of enzymatic deinked pulp was improved compared to the deinked pulp of conventional alkaline method.

• Archives of Pharmacal Research
• /
• v.8 no.4
• /
• pp.267-272
• /
• 1985

Pyrantal pamoate's anthelmintic activity is due to its action as a neuromuscular blocking agent. It is generally well tolerated. Transient rises in SGOT levels have been reported in the drug-treated patients. Decreased levels of serum alkaline phosphatase post treatment were found in yound dogs. The present study was performed to investigate the possible toxic effects of pyrantal pamoate in pregnant mice progenies. The drug was given in different doses to these mothers in the first, second and third trimester. Serum alkaline phosphatase, SGOT and SGPT of one or two month old offspring were monitored. SGOT levels showed an increase in some doses in one and two month old offspring where alkaline phosphatase showed a decrease in some doses in one and two month old offspring. The latter effect may be due to osteoblastic alkaline phosphatase inhibition. The effect on SGOT levels, however, was difficult to explain, but may be due to a toxic effect on liver cells or cardiac muscles.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.04a
• /
• pp.167-173
• /
• 2006

Deinking is a series of unit operations designed to detach ink from cellulose fibers and separate the dispersed ink from the pulp slurry. Deinking chemicals are process aids that enable expensive mill equipment used in these unit operations to operate more efficiently - often much more efficiently. We propose the blended deinking agent with cellulolutic enzymes and synthetic collector in deinking pulp of conventional alkaline method. The deinking efficiency of old news print in alkaline pH was enhanced with enzyme treatments. The brightness of deinked pulp was increased with less residual ink particles and yield of enzymatic deinked pulp was improved compared to the deinked pulp of conventional alkaline method. Enzymes in biomass were use to Chemical Deinking for reduce environment pollution through surfactant and improve surfactants. examining into compatibility Enzymes and surfactants, these new materials are studied efficiency of deinking efficiency.