• Journal of Institute of Convergence Technology
• /
• v.3 no.1
• /
• pp.9-14
• /
• 2013

Recently, the development of renewable energy sources in Mongolia has been needed due to climate change and air pollution in Ulaanbaatar as rapid economic growth. Biodiesel can be considered as an alternative fuel for petroleum based diesel in order to decrease air pollution in Ulaanbaatar because of its no emission of particle materials from internal combustion engine in automobile. Rapeseed oil having low cloud point and pour point was suggested as a promising raw material for biodiesel production in Mongolia. Considering high population density and severe air pollution by particle materials and SOx in Ulaanbaatar, prior supplying site of biodiesel in Mongolia was the capital region including Ulaanbaatar. In the production of biodiesel in Mongolia, adsorption process was a effective alternative to washing process for the removal of residual alkali catalyst and reactants due to long winter time in Mongolia. For the stable supply of biodiesel, subsidy and no tax policy is needed in the early stage of biodiesel supply in Mongolia.

• Journal of the Korean Applied Science and Technology
• /
• v.23 no.4
• /
• pp.300-306
• /
• 2006

The esterification of palmitic acid in rapeseed oil and methanol emulsified by propylene glycol with PTSA(p-toluene sulfonic acid) was followed by the transesterification of rapeseed oil into biodiesel with 1(w/v)% GMS(glycerol monostearate) as an emulsifier using TMAH(tetramethyl ammonium hydroxide) catalysts at $60^{\circ}C$. The former reaction was optimized at the 1:20 of molar ratio of oil to methanol and 5wt% PTSA, and the latter was optimized at the 1:8 of molar ratio of oil to methanol and 0.8wt% TMAH. The overall conversion into biodiesel was 98% after 60min of reaction time at the 1:8 of molar ratio, 0.8wt% TMAH and $60^{\circ}C$. TMAH was a good catalyst to control the viscosity of biodiesel mixture.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.8
• /
• pp.2272-2278
• /
• 2010

A new hybrid thermosetting maleimido epoxy compound 4-(N-maleimidophenyl) glycidylether (N-MPGE) is prepared by reacting N-(4-hydroxyphenyl) maleimide (HPM) with Epichlorohydrin by using benzyltrimethylammonium chloride as a catalyst. The resulting compound possesses both the oxirane ring and maleimide group. The curing reaction of these maleimidophenyl glycidylether epoxy compound (N-MPGE) with amines as curing agents such as ethylendiamine (EDA), diethylentriamine (DETA) and triethylenetetramine (TETA), aminoethylpiperazine (AEP) and isophoronediamine, IPDA), are studied. Incorporation of maleimide groups in the epichlorohydrin provides cyclic imide structure and high cross-linking density to the cured resins. The cured samples exhibited good thermal stability, excellent chemical (acid/alkali/solvent) and water absorption resistance. Morphological studies by the SEM technique further confirmed the phase homogeneity net work of the cured systems.

• Korean Chemical Engineering Research
• /
• v.56 no.3
• /
• pp.416-420
• /
• 2018

A comprehensive kinetic study has been conducted on dimethyl carbonate synthesis by transesterification reaction of ethylene carbonate with methanol. An alkali base metal (KOH) was used as catalyst in the synthesis of DMC, and its catalytic ability was investigated in terms of kinetics. The experiment was performed in a batch reactor at atmospheric pressure. The reaction orders, the activation energy and the rate constants were determined for both forward and backward reactions. The reaction order for forward and backward reactions was 0.87 and 2.15, and the activation energy was 12.73 and 29.28 kJ/mol, respectively. Using the general factor analysis in the design of experiments, we analyzed the main effects and interactions according to the MeOH/EC, reaction temperature and KOH concentration. DMC yield with various reaction conditions was presented for all ranges using surface and contour plot. Furthermore, the optimal conditions for DMC yield were determined using response surface method.

• Journal of the Korean Applied Science and Technology
• /
• v.9 no.1
• /
• pp.1-6
• /
• 1992

New five N-acyl-N-methyl taurate and their sodium salts were synthesized by acylating sodium N-methyl taurate in water in the presense of inorganic alkali as a catalyst. Wherein acyl group is a straight-chain radical of 10 to 18 carbon atoms. These compounds were identified by infrared spectroscopy. Surface activities of these sodium N-acyl-N-methyl taurate including surface tension, Ross-Miles foaming powers, foam stabilities, emulsifying powers and detergency were measured respectively. Also critical micelle concentration(cmc) were evaluated. Consequently these anionic surfactants with long chain acyl amine showed good emulsifying power of O/W type and had a good detergence.

• Transactions of the Korean hydrogen and new energy society
• /
• v.30 no.3
• /
• pp.193-200
• /
• 2019

$RuO_2$, $PtO_2$, and various $(Ru,Pt)O_2$ colloidal solution were prepared using modified Watanabe method. Electrodes were manufactured by dipping of Ni mesh into the colloidal solution. Manufactured electrodes were characterized by XRD, SEM, and EDS. $(Ru,Pt)O_2$ electrodes showed $RuO_2$ crystal structure and high roughness. The hydrogen evolution reaction (HER) activities were evaluated by Linear Sweep Voltammetry. 1Ru2Pt electrode showed similar activity with commercial electrode, HER potentials are -0.9 V for both.

• Journal of the Korean Institute of Gas
• /
• v.9 no.4 s.29
• /
• pp.17-25
• /
• 2005

The dealuminated and alkali/alkaline-earth metal exchanged Y-zeolites were prepared as a catalyst. Elemental compositions and structures of the prepared catalysts were analyzed by the various spectroscopic techniques such as inductively coupled plasma-atomic emission spectroscopy(ICP-AES), X-ray fluorescence(XRF) and X-ray diffraction(XRD), and the desorption behaviors of adsorbed species on the catalyst surfaces were investigated via NO-TPD experiment. Comparing with the composition of the starting material of NaY zeolite, the magnitudes of Si/Al ratio in catalytic materials were increased after dealumination. The Si/Al ratio of catalytic materials after dealumination followed by Cs and Ba cation exchange were additionally decreased. Dealumination to catalysts induced a destruction of basic frame due to a detachment of aluminum, which results in reducing framework structure, while increasing non-framework structure. This phenomenon becomes more serious with increasing time of steam treatment and even more significant for the cation exchanged catalysts. In NO-TPD experiments, the desorption peaks of NO which indicates an activity point of catalysts shifted to the low temperature region after dealumination and cation exchange. The desorption peaks of the NO-TPD profiles taken after steam treatment also shifted to the low temperature region as the steam treatment time increased. In dealuminated and cation exchanged Y-zeolites, the catalytic activities were more influenced by exchanged cation and the formation of non-framework structure.

• Applied Chemistry for Engineering
• /
• v.22 no.6
• /
• pp.631-635
• /
• 2011

Spherical and non-spherical silica particles prepared by the direct oxidation were studied for the effect of the particle size and shape of these particles on oxide CMP removal rate. Spherical silica particles, which have 10~100 nm in size, were prepared by the direct oxidation process from silicon in the presence of alkali catalyst. The 10 nm silica particles were aggregated by addition of an acid, an alcohol, or a silane as an aggregation inducer between the particles. Two or more aggregated silica particles were used as a seed to grow non spherical silica particles in the direct oxidation process of silicon in the presence of alkali catalyst. The oxide removal rate of spherical silica particles increased with increasing an average particle size for spherical silica abrasives in the oxide CMP. It further increased non-spherical particles, compared with the spherical particles in the similar average particle size.

• Journal of the Korean Chemical Society
• /
• v.33 no.2
• /
• pp.177-184
• /
• 1989

Acidic properties of ZSM-5 zeolite catalysts were investigated by temperature-programmed desorption technique and ir spectroscopy. Ammonia t.p.d. pattern of HZSM-5 showed three different states, designated as ${\alpha}$,${\beta}$ and ${\gamma}$. The amount of ${\gamma}$-state decreased with increasing $SiO_2/Al_2O_3$ ratio, and upon cation-exchanging with alkali cations. From the ir adsorption spectra of absorbed pyridine and the reaction study of toluene alkylation, the ${\gamma}$-state could be explained to be due to the strong Bronsted acid sites of H-ZSM-5. Also they showed that the interaction between alkali cation-exchanged ZSM-5 and bases, i.e. $NH_3$ and pyridine, was increasing with decreasing the size of cations.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.2
• /
• pp.519-523
• /
• 2012

A kinetic study is reported on nucleophilic displacement reactions of benzyl 2-pyridyl carbonate 6 with alkalimetal ethoxides, EtOM (M = Li, Na, and K), in anhydrous ethanol at $25.0{\pm}0.1^{\circ}C$. The plots of pseudo-firstorder rate constant $k_{obsd}$ vs. [EtOM] curve upward, a typical phenomenon reported previously for alkaline ethanolysis of esters in which alkali-metal ions behave as a Lewis-acid catalyst. The kobsd value for the reaction of 6 with a fixed EtOK concentration decreases rapidly upon addition of 18-crown-6-ether (18C6), a complexing agent for $K^+$ ion up to [18C6]/[EtOK] = 1.0 and then remains constant thereafter, indicating that the catalytic effect exerted by K+ ion disappears in the presence of excess 18C6. The reactivity of EtOM towards 6 increases in the order $EtO^-$ < EtOLi < EtONa < EtOK, which is contrasting to the reactivity order reported for the corresponding reactions of 2-pyridyl benzoate 4, i.e., $EtO^-$ < EtOK < EtONa < EtOLi. Besides, 6 is 1.7 and 3.5 times more reactive than 4 towards dissociated $EtO^-$ and ion-paired EtOK, respectively. The reactivity difference and the contrasting metal-ion selectivity are discussed in terms of electronic effects and transition-state structures.