• 대한환경공학회지
• /
• 제35권6호
• /
• pp.415-421
• /
• 2013

활성탄소섬유(Activated carbon fiber, ACF)의 비표면적을 향상시키는 대표적인 방법은 알칼리금속을 이용한 화학적 활성화(Chemical activation, CA)와 산화제를 이용한 표면처리(Surface treatment, ST)방법이 있다. 알칼리금속을 이용한 CA 공정은 열처리 과정에서 알칼리금속의 화학반응에 의하여 미세기공이 발달되며, ST 공정은 산화제의 산화력에 의하여 표면의 미세기공을 발달시킨다. 본 연구에서는 대표적인 표면개질 방법인 CA 공정의 효과를 증대하기 위하여 전처리로 ST 공정을 수행하였으며, ST 공정 유무에 따라 CA된 ACF의 특성변화를 관찰하였다. ST 및 CA 유무에 따른 ACF 특성을 조사하기 위하여 무게변화, FT-IR, TGA, 원소분석을 수행하였으며, 대표적인 VOC물질인 톨루엔을 이용하여 흡착특성을 평가하였다. 실험결과 초기 raw ACF의 비표면적과 톨루엔 흡착량은 각각 1,483 $m^2/g$, 0.22 $g_{-Tol.}/g_{-ACF}$였으며, CA 처리시 1,998 $m^2/g$, 0.27 $g_{-Tol.}/g_{-ACF}$로 증가하였고, ST된 ACF를 CA 처리한 경우 2,743 $m^2/g$, 0.37 $g_{-Tol.}/g_{-ACF}$로 증가하였다. 본 연구를 통하여 ST 및 CA 결합공정을 통한 ACF의 표면특성을 증가를 확인하였다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제19권5호
• /
• pp.104-111
• /
• 2015

본 연구는 혼합 활성화제에 의한 알칼리 활성화 슬래그 시멘트(AASC)의 역학적 특성에 관한 연구이다. 사용된 활성화제는 황산칼슘($CaSO_4$, 이하 CS), 황산나트륨($Na_2SO_4$, 이하 SS) 및 수산화나트륨(NaOH)이다. 황산염은 슬래그 중량의 2.5, 5.0, 7.5 및 10.0%로 치환하여 사용하였으며, NaOH는 2M 및 4M 농도의 수용액으로 사용하였다. 본 연구에서는 황산염(CS 및 SS) 치환율에 따른 배합(4가지 배합)과 2M 및 4M의 각각의 NaOH 수용액에 치환된 황산염을 혼합하여 시험체를 제작하였다. 시험체는 총 24가지의 배합에 따라 페이스트로 제작되었으며, 물-결합재 비는 0.5로 하였다. 경화된 시험체에 대해서 압축강도, 휨강도, 초음파속도(UPV), 흡수율 및 XRD 분석을 수행하였다. CS의 활성화제를 사용한 경우는 7.5% CS 치환율, 2M NaOH 수용액 + 5.0% CS 치환율 및 4M NaOH 수용액 + 5.0% CS 치환율의 시험체에서 최고의 압축강도를 나타내었다. 또한, SS의 활성화제를 사용한 경우는 10.0% SS 치환율, 2M NaOH + 7.5% SS 치환율 및 4M NaOH + 2.5% SS 치환율에서 최고의 압축강도 발현을 나타내었다. 휨강도, UPV 및 흡수율은 압축강도 발현 결과와 유사한 경향을 나타내는 것을 알 수 있었으며, XRD 분석결과 시험체 내에 생성된 반응물질은 ettringite, CSH 및 실리케이트계 수화물인 것으로 나타났다. AASC에서 황산염과 NaOH의 혼합 사용은 황산염의 단독 사용의 경우와 비교하여 일정 수준의 농도 범위에서 강도를 향상시키고 조직을 치밀화 시키는 등의 긍정적인 영향을 미치는 것으로 판단된다.

• Asian Journal of Atmospheric Environment
• /
• 제10권2호
• /
• pp.99-113
• /
• 2016

In order to improve the portability of basic absorbents monoethanolamine (MEA) and glycine (Gly), both were supported on microporous activated carbon (AC). Chemical modification by alkali-metal ion exchange (of Li, Na, K) was carried out on Gly-based absorbents. All supported absorbents were subjected to $CO_2$ absorption capacity (pure $CO_2$) and selectivity (indoor level) tests. Textural and chemical characterizations were carried out on test sorbents. All impregnation brought about significant reduction of specific surface area and microporosity of the adsorbent Depreciation in the textural properties was found to result to reduction in pure $CO_2$ sorption. Contrarily, low-level $CO_2$ removal capacity was enhanced as the absorbent dosage increases, resulting in supported 5 molar MEA in methanol solution. Adsorption capacities were improved from 0.016 and 0.8 in raw ACs to 1.065 mmol/g for MEA's. Surface chemistry via X-ray photoelectron spectroscopy (XPS) of the supported sorbents showed the presence of amine, pyrrole and quaternary-N. In reducing sequence of potency, pyridine, amine and pyrrolic-N were noticed to contribute significantly to $CO_2$ selective adsorption. Furthermore, the adsorption isotherm study confirms the presence of various SNGs heterogeneously distributed on AC. The adsorption mechanism of the present AC adsorbents favored Freundlich and Langmuir isotherm at lower and higher $CO_2$ concentrations respectively.

• 한국세라믹학회지
• /
• 제52권6호
• /
• pp.483-488
• /
• 2015

Blast furnace slag(BFS) is well known for its hardening mechanism in ordinary Portland cement with alkali activation due to its latent hydraulic property. The possibility of using calcium compound as activator for BFS has been investigated in this study. The hydration properties of calcium compound activated BFS binders were explored using heat of hydration, powder X-ray diffraction and compressive strength testing. Heat of hydration results indicate that the hydration heat of BFS is lower than OPC paste by about 50%. And ettringite as hydration product was formed continuously as the calcium sulfate was decreased. The maximum compressive strength of hardened BFS mortar at 28 days is confirmed to be 83% as compared with hardened OPC mortar.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.1009-1012
• /
• 2003

A novel powder processing technique for the preparation of copper activated zinc sulfide (ZnS:Cu,Al) phosphor by combustion process has been proposed. Exothermic reaction between dissolved copper nitrate and carbohydrazide give small-sized particles in presence of alkali metal halides at lower temperature than the traditional method of preparation. This new route takes less than five minutes and requires much less energy. The optical and luminescence characteristics of ZnS:Cu,Al phosphor thus prepared were found to be enhanced significantly. Carbohydrazide acted as fuel at $500^{\circ}C$ with rapid heating and then the phosphors obtained were heated at $900^{\circ}C$ in an inert atmosphere for 3hrs to get better luminescent properties.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2010년도 춘계 학술대회 제22권1호
• /
• pp.363-364
• /
• 2010

최근 결합재로 시멘트를 사용하지 않은 알칼리 활성 콘크리트에 대한 연구가 활발히 진행되고 있다. 본 연구에서는 시멘트를 전혀 사용하지 않고 결합재로서 플라이애시와 고로슬래그의 혼합비율에 따른 압축강도와 미세구조를 분석하였다.

• 약학회지
• /
• 제6권2호
• /
• pp.1-6
• /
• 1962

Clinical tests revealed that the extracts of Gelidium amansii (Gelidiaceae) had a anthelmintic action and further examinations were made on the anthelmintic components of this seaweed. This anthelmintic principle is absorbed on alumina and eluted from it by alkali solution. The active principle is absorbed on activated carbon from aqueous extract and eluted from it by methanol and it is not adsorbed on Amberite IR-120(H-form). This anthelmintic effective fraction was prepared by the use of this properties. Action of the active principle of Gelidium amansii was examined pharmacologically. The active principle of Gelidium amansii was found to decrease the tensity, tonus and mobility of Eisenia foetida(Savigny) nerve muscles. The active principle of this effective fraction was submitted to paper chromatography and spots to ninhydrin were detected at Rf; 0.30-0.31(yellow), 0.26(violet), 0.2(violet), 0.14-0.13(violet), 0.9(orange) and 0.04(violet).

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.759-761
• /
• 2002

A new method for the preparation of copper activated zinc sulfide phosphors by combustion method has been proposed. Copper nitrate was decomposed with an organic fuel to give fine sized particles in presence of alkali metal halides at low temperature than the conventional synthesis. Organic compound also acted as fuel at 500 $^{\circ}C$ with rapid heating. The phosphors thus obtained were then heated at 900 $^{\circ}C$ in an inert atmosphere for 2-5 hrs to get better luminescent properties.

• 한국자원리싸이클링학회:학술대회논문집
• /
• 한국자원리싸이클링학회 2005년도 춘계임시총회 및 제25회 학술발표대회
• /
• pp.131-135
• /
• 2005

• 한국식품영양과학회지
• /
• 제27권5호
• /
• pp.993-999
• /
• 1998

Methanol extract of roots of Amblytropis pauciflora Kitagawa showed the antimicrobial activity to three test strains. Antimicrobial spectra of various extracts of Amblytropis pauciflora Kitagawa were tested against 24 strains of bacteria and fungi. The crude methanol extract inhibited the growth of 12 strains of bacteria and Asp. fumigatus with the exception of yeasts. The properties of the antimicrobial substance were very stable under heat(at 12$0^{\circ}C$), acid(pH 3.0) and alkali(pH 11.0) treatment. Only the root harvested in spring showed the antimicrobial activity. Among the components extracted by butanol, ginseng saponin Rg1 and various saponin-like materials were detected by TLC analysis using a plate of silica gel 60F254. The antimicrobial compound was purified by methanol extraction, activated charcoal column chromatography, Sep-pak(C18) pretreatment and reverse phase HPLC. The purified compound was detected at 13.520 min as a single peak(about 98% purity) through the HPLC analysis.