• 제목/요약/키워드: alignments

검색결과 285건 처리시간 0.025초

흑연 표면에 형성된 dipyrromethene-trimer 분자의 저차원 나노구조의 주사 터널링 현미경 연구 (STM Study of Low Dimensional Nanostructures Formed by Adsorption of Dipyrromethane-trimer Molecules on Graphite Surface)

  • 손승배;이수진;한재량;신지영
    • 한국진공학회지
    • /
    • 제17권5호
    • /
    • pp.375-380
    • /
    • 2008
  • Dipyrromethene 유도체 분자 중 하나인 삼각형 모양의 Co-DPM 거대분자 (Co-DPM-trimer, Fig. 1)를 이용하여 흑연 표면에서 다양한 저차원 분자 나노구조를 형성할 수 있었으며, 이를 주사 터널링 현미경(scanning tunneling microscope)으로 관찰하였다. Co-DPM-trimer 분자를 $CH_2Cl_2$ 용매에 녹여 흑연 표면에 뿌리면, 용매가 증발되며 그 동안 표면에 분자 나노구조가 형성된다. 본 연구에서는 다양한 두께의 긴 1차원 분자선과 2차원 구조인 육각형 패턴을 관찰하였다. 1차원 분자선과 2차원 육각형 패턴의 높낮이 및 구조를 분석한 결과, 1차원 분자선의 경우 흑연 표면에 'edge-on'정렬로 연속된 $\pi-\pi$ stacking 상호작용에 의해서, 그리고 육각형 패턴 구조는 'face-on'정렬을 통해서 형성된 것으로 보인다.

곡선부 최적 선형 설계기법에 관한 연구 (A Study on Optimum Design for Railway Alignment in Curve)

  • 엄주환;양신추;김은경
    • 한국철도학회논문집
    • /
    • 제12권4호
    • /
    • pp.597-603
    • /
    • 2009
  • 본 연구에서는 승차감을 목적함수로 하고 궤도부담력을 경계조건으로 하는 곡선부 평면선형의 최적설계 기법을 제시하였다. 평면선형 최적화시 중요한 변수인 곡선반경-완화곡선장은 엄주환 등(2009)에서 제시한 결정방법을 적용하였으며 승차감 평가방법은 영국 BSI(2006)에서 제시하는 곡선부 전용 승차감 평가방법인 $P_{CT}$방법을 활용하였다. 또한 한국형 고속전철 G7(KTX-II)모델을 이용한 차량/궤도선형 상호작용 해석을 수행하였다. 해석결과, 최적선형조건은 교각 I(곡선부 양 끝단 직선과 직선이 만나는 교차각) 크기 및 곡선반경-완화곡선장 조합에 따라 다름을 알 수 있었다. 또한 Kufver(1997) 등에서 제시하는 간략화 해석방법과 유사한 경향이 나타남을 알 수 있었으나, 대부분의 경우 동적해석결과 값이 크게 나타났다. 따라서 곡선부 최적선형 설계시 동적해석과 간략화 해석을 병행한다면 신속하고 신뢰성 높은 최적선형을 결정할 수 있을 것으로 판단된다.

Modeling the Calculation of Lateral Accelerations in Railway Vehicles as a Tool of Alignment Design

  • Nasarre, J.;Cuadrado, M.;Requejo, P.Gonzalez;Romo, E.;Zamorano, C.
    • International Journal of Railway
    • /
    • 제2권3호
    • /
    • pp.118-123
    • /
    • 2009
  • Railway track alignment Standards set a minimum lenght value for straight and circular alignments (art. 5.2.9.), in order to ensure passenger ride comfort in railway vehicles of which dynamic oscillations will thus have to be limited. The transitions between alignments can cause abrupt changes (usually called discontinuities or singular points of the alignment) of curvature, of rate of change of curvature or of rate of change of cant. A passenger is likely to experience effects due to the excitation of the elastic suspension of the vehicle which generates oscillations that are damped as the vehicle moves away from the singularity. The amplitude of these oscillations should be adequately attenuated by the damping of the suspension system within the interval between two successive singular points, especially to avoid resonances. Therefore minimum lengths between two successive singular points are stated in alignment standards. Nevertheless, these nonnative values can be overly conservative in some cases. As an alternative, track alignment designers could try to assess how much the excitation has been attenuated between two successive singular points and thus assess at which point a new singularity may be present without affecting ride comfort. Although such assessment can be made with commercial SW packages which simulate the dynamic behavior of a vehicle considered as a set of rigid bodies interconnected with elastic elements simulating the suspension systems (such as SIMPACK, ADAMS or VAMPIRE), a simplified and user-friendly computation method (based upon the analytical solution of differential equations governing the phenomenon) is made available in this paper to track design engineers, not always used to working with full dynamic models.

  • PDF

개별차량의 주행행태를 이용한 설계일관성 평가 방법에 관한 연구 (Research for the Method of Design Consistency Evaluation Using Individual Driving Behavior)

  • 손영태;김철기
    • 대한토목학회논문집
    • /
    • 제28권6D호
    • /
    • pp.767-774
    • /
    • 2008
  • 본 연구에서는 지방부 2차로 도로(평면 곡선부)에서의 개별차량 속도를 이용하여 도로의 안전성 평가 방법을 개발하였다. 이를 위해 선정된 96개 지점의 차량속도를 이용하여 개별차량의 주행 속도변화를 추출하였으며, 추출된 속도자료를 이용하여 도로의 평면선형과 종단선형을 고려한 예측 모형식을 개발하였다. 또한 모형을 활용하여 추정된 개별차량의 속도와 개별차량의 가속도를 이용하여 도로의 안전성을 평가하는 방법을 제시하였으며 두 가지 방법으로 도출된 결과를 종합적으로 판단하여 일정 도로구간의 안전성을 양호, 보통, 열악의 세 단계로 평가하도록 하였다. 본 연구에서 제시한 안전성 평가 방법은 추후 안전성 측면에서 개선이 필요한 지점을 도출하는데 활용 될 수 있을 것으로 판단된다.

A Pathway to Microdomain Alignment in Block Copolymer/Nanoparticle Thin Films under Electric Field

  • Bae, Joonwon
    • Bulletin of the Korean Chemical Society
    • /
    • 제35권9호
    • /
    • pp.2689-2693
    • /
    • 2014
  • The control over microstructure in block copolymer thin films using external electric fields has become an interesting research topic. In this article, the effect of nanoparticle on the microdomain alignments in block copolymer (polystyrene-b-poly(2-vinylpyridine)/nanoparticle (Au) thin films under electric fields has been examined with transmission electron microscopy. The homogeneous dispersion of Au nanoparticles into the block copolymer matrix was achieved by surface modification of nanoparticles with compatible ligands. Compared with the phenomenon seen in the pristine block copolymer thin films, a peculiar alignment behavior was observed in the block copolymer/nanoparticle hybrid thin films under electric fields. In addition, the different pathways observed in the pristine and nanoparticle incorporated block copolymer thin films were also monitored as a function of exposure time. This work can provide the fundamental information for understanding microdomain alignment in block copolymer/nanoparticle thin films under external electric fields.

Alignments of interacting haloes in the Horizon run 4 simulation

  • L'Huillier, Benjamin;Park, Changbom;Kim, Juhan
    • 천문학회보
    • /
    • 제40권2호
    • /
    • pp.29.2-29.2
    • /
    • 2015
  • Interactions such as mergers and flybys play a fundamental role in shaping galaxy morphology. We used the Horizon Run 4 cosmological N-body simulations to study the aligments of spins and shapes of interacting haloes as a function of the halo mass and large-scale density. Interactions preferentially occur in the plane of rotation, and in the direction of the major axis of prolate haloes, and the trajectories are preferentially radial and prograde. We found a very strong alignment of the shapes already at redshift as high as 4. The spins are initially unaligned or even anti-aligned, and become more and more aligned as the redshift decreases. The alignment signals are stronger and evolve more at lower densities, and mass plays a secondary role.

  • PDF

CONVIRT: A web-based tool for transcriptional regulatory site identification using a conserved virtual chromosome

  • Ryu, Tae-Woo;Lee, Se-Joon;Hur, Cheol-Goo;Lee, Do-Heon
    • BMB Reports
    • /
    • 제42권12호
    • /
    • pp.823-828
    • /
    • 2009
  • Techniques for analyzing protein-DNA interactions on a genome-wide scale have recently established regulatory roles for distal enhancers. However, the large sizes of higher eukaryotic genomes have made identification of these elements difficult. Information regarding sequence conservation, exon annotation and repetitive regions can be used to reduce the size of the search region. However, previously developed resources are inadequate for consolidating such information. CONVIRT is a web resource for the identification of transcription factor binding sites and also features comparative genomics. Genomic information on ortholog-independent conserved regions, exons, repeats and sequences is integrated into the virtual chromosome, and statistically over-represented single or combinations of transcription factor binding sites are sought. CONVIRT provides regulatory network analysis for several organisms with long promoter regions and permits inter-species genome alignments. CONVIRT is freely available at http://biosoft.kaist.ac.kr/convirt.

Genomic Sequence alignments and its application for Computing Linear Structure Similarity

  • 조환규;황미녕;강은미;이미경
    • 한국생물정보학회:학술대회논문집
    • /
    • 한국생물정보시스템생물학회 2002년도 제1차워크샵
    • /
    • pp.64-88
    • /
    • 2002
  • 생물체의 유전자 서열들간의 유사성을 서로 비교해보는 일은(sequence alignment)는 분자생물학 연구에서 아주 기본적인 작업에 속한다. 이 작업은 컴퓨터 과학적 입장에서 살퍼보면 일종의 스트링 분석작업인데, 그 과정에는 매우 복잡한 생물학적인 가정이 내포되어 있다. 본 발표의 목적은 크게 두가지인데 하나는 컴퓨터과학 연구자들에게 서열정렬(sequence alignment)이 가지는 분자생물학적 의미에 대하여 개략적인 이해를 돕도록 하는 것이며, 다른 한편으로 분자생물학자들에게는 스트링처리방법을 이용한 서열정렬 문제에서 어떤 기술적인 한계가 있으며 그 한계를 극복하기 위한 새로운 방법론에 대하여 소개하여 컴퓨터과학적 이해의 폭을 넓히는 것이다. 그리고 생물체의 서열정보의 정렬과 매우 유사한 개념으로 각종 선형구조체(linear object)를 추상화 할 수 있른데, 그들간의 유사성도 같은 분자생물학적 방법론을 차용하여 분석할 수 있음을 보인다. 동시에 이것을 이용하여 각종 인터넷 문서나 프로그램, 등의 표절과 무단도용 등을 추적할 수 있는 방법론을 기존의 genomic sequence alignment tool을 차용해서 매우 효율적으로 할 수 있음을 보인다.

  • PDF

극초정밀 다축 스테이지를 이용한 광소자 정렬 특성 향상에 관한 연구 (A Study on the Optical Device Alignment Characteristics Improvement using Multi-Axis Ultra Precision Stage)

  • 정상화;차경래;김광호
    • 한국정밀공학회지
    • /
    • 제22권12호
    • /
    • pp.175-183
    • /
    • 2005
  • In recent years, as the demands of VBNS and VDSL increase, the development of kernel parts of optical communication such as PLC(Planar Light Circuit), Coupler, and WDM elements increases. The alignment and the attachment technology are very important in the fabrication of optical elements. In this Paper, the optical alignment characteristic of multi-axis ultra precision stage is studied. The alignment algorithms are studied for applying to the ultra precision multi-axis stage. The alignment algorithm is comprised of field search and peak search algorithms. The contour of optical power signals can be obtained by field search and the precise coordinate can be found out by peak search. Three kinds of alignments, such as 1 ch. input vs. 1 ch. output optical stack, 1 ch. input vs. 8 ch. output PLC stacks, and ferrule vs. ferrule, are performed for investigating the alignment characteristics.

Nanofibrous Meshes Promoting Celular Proliferation

  • 유혁상;최지숙;김혜성
    • 한국재료학회:학술대회논문집
    • /
    • 한국재료학회 2011년도 추계학술발표대회
    • /
    • pp.2.1-2.1
    • /
    • 2011
  • Biomedical applications of electrospun nanofibrous meshes have been receive tremendous attentions because of their unique structures and versatilities as novel biomaterials. Incorporation of growth factors in fibrous meshes can be performed by surface-modification and encapsulation. Those growth factors stimulate differentiation and proliferation of specific types of cells and thus lead tissue regenerations of specific cell types. Topographical cues of electrospun nanofibrous meshes also increase differentiation of specific cell types according to alignments of fibrous structures. Wound healing treatments of diabetic ulcers were performed using nanofibrous meshes encapsulating multiple growth factors. Aligned nanofibrous meshes and those with random configuration were compared for differentiating mesenchymal stem cells into neuronal cells. Thus, nanofibrous meshes can be applied to novel drug delivery carriers and matrix for promoting cellular proliferation.

  • PDF