• Journal of the FoodService Safety
• /
• v.4 no.1
• /
• pp.21-28
• /
• 2023

Saccharomyces cerevisiae and Zygosaccharomyces rouxii are known to produce alcohol in gochujang. To reduce alcohol production, garlic and chives were applied to gochujang solution to find their inhibitory effect on S. cerevisiae and Z. rouxii. The 70% ethanol extract of garlic and chives showed significant inhibition activity against S. cerevisiae and Z. rouxii, showing growth inhibition zone of 14.00±0.00~25.33±0.58 mm by disc diffusion method. In addition, the addition of 70% ethanol extract of garlic and chives in 10% gochujang solution spiked with S. cerevisiae and Z. rouxii reduced the numbers of total aerobic bacteria (below 7 Log CFU/g) and yeast (below 4 Log CFU/g), alcohol content (below 0.30%), respectively. In conclusion, the addition of garlic ethanol (70%) extract or chives ethanol (70%) extract to gochujang inhibited the growth of S. cerevisiae and Z. rouxii, resulting in reduced alcohol content in gochujang. For further study, it is necessary to conduct food application experiments by using real gochujang paste.

• Journal of Powder Materials
• /
• v.18 no.1
• /
• pp.35-40
• /
• 2011

LAS-system ceramic powder, spodumene ($Li_2O{\cdot}Al_2O_3{\cdot}4SiO_2$), was successfully synthesized by a chemical solution technique employing PVA(polyvinyl alcohol) as an organic carrier. The PVA content affected the microstructure of porous precursor gels and the crystalline development. The optimum PVA content contributed to homogeneous distribution of metal ions in the precursor gel and it resulted in the synthesis of glass free $\beta$-spodumene powder having a specific surface area of $7.57\;m^2/g$. The agglomerated $\beta$-spodumene powders were also enough soft to grind to fine powders by a simple ball milling process. The microstructures of the densified powder compacts were strongly dependant on the minor phases of spodumene solid solution and amount of liquid phase, which were formed from the inhomogeneous precursors.

• Journal of Ginseng Research
• /
• v.5 no.2
• /
• pp.148-154
• /
• 1981

The effect of ginseng extracts and ginseng saponins on alcoholic fermentation and production of higher alcohols in malt wort by Sacch. uvarnm were studied The results otained were as follows. 1. Alcoholic fermentation of the wort contained 1-5% of ginseng extracts was inhibited slightly, but the wort contained 0.1-0.5% of ginseng extracts were same as the control. 2. 0.02-0.2% of saponin stimulated alcoholic fermentation. 3. Higher alcohol contents were decreased when the wort contained 0.1-0.5% of ginseng extracts. 4. Higher alcohol content were increased when the wort contained 0.02-0.2% of ginseng saponin. Iso-amylalcohol content of fermented wort which contained ginseng saponins were higher 18 -35mg/1 than those of control.

• Macromolecular Research
• /
• v.10 no.3
• /
• pp.140-144
• /
• 2002

Dispersion polymerization of acrylamide was carried out in the media of methyl alcohol/$H_2O$ mixtures using hydroxypropyl cellulose and ammonium persulfate as steric stabilizer and initiator, respectively. The effects of concentrations of initiator and steric stabilizer, amount of monomer, polymerization temperature, methyl alcohol/$H_2O$ ratio, and purification of monomer and nitrogen purge on the particle size of the latices and molecular weight of the polymers were investigated. The average particle diameter increased with increasing concentration of initiator, water content in methyl alcohol/$H_2O$ media, and polymerization temperature, but decreased with monomer and stabilizer concentrations. The viscosity average molecular weight increased with increasing concentrations of monomer, steric stabilizer, and water content in dispersion media, but decreased with initiator concentration and polymerization temperature. The PAM polymers prepared with the purified monomer and the nitrogen purging before the reaction showed the highest molecular weight.

• Journal of the East Asian Society of Dietary Life
• /
• v.8 no.1
• /
• pp.57-65
• /
• 1998

To utilize deteriorated sweet persimmon effectively, response surface methodology(RSM) was used to determine the optimal vinegar fermentation conditions and monitored by a divided two stage fermentation. The optimum conditions for maximum alcohol content were obtained when the first stage (alcohol fermentation) was carried out with an initial sugar concentration of 18.5$^{\circ}$Brix, agitation rate of 140.8 rpm, fermentation time of 127.6 hr. When sugar concentration was 14$^{\circ}$Brix maximum alcohol content(7.1%) was predicted at fermentation conditions of 160 rpm in agitation rate, 140hr in fermentation time. The optimum conditions for maximum acidity were obtaiend when second stage(vinegar fermentation)was carried out 249.5 rpm in agitation rate, 148.8 hr in fermentation time. Predicted values at the optimum conditions were similar to experimental values.

• Journal of Hydrogen and New Energy
• /
• v.26 no.6
• /
• pp.629-637
• /
• 2015

As concern about energy security and global warming many countries have been making effort to reduce fossil fuel. In the case of US, as one of the efforts, the standards of the alcohol vehicle fuels(including blended with gasoline) have been established. Alcohol is known that make some trouble concerning startability, durability and corrosion when using as fuel of a conventional vehicle. For these reason, alcohol usage needs not only the fuel standard, but also a modified car. In the case of Korea, although there are no the standard and the modified vehicle yet, high concentration alcohol blended fuel has being sold at illegal market. In this study, exhaust gas and performance of the conventional vehicle that alcohol(methanol and isopropyl alcohol) blends were fueled were measured to notify danger of using them without preparation of institutional arrangements. Also, to analyze correlation characteristics of the fuels and them, property test of the fuels was conducted. The test result show that bad-startability caused by low RVP and high T10 affected increase in NMOG and CO. NOx was increased under the highest short term fuel trim caused by high Oxygen content and low NHV of alcohol. According to increasing as alcohol content, fuel economy and acceleration ability were decreased but $CO_2$ was not significantly decreased.

• Korean Journal of Food Science and Technology
• /
• v.20 no.1
• /
• pp.52-58
• /
• 1988

This study has investigated the effect of Ganoderma lucidum water soluble extract on higher alcohol production of Saccharomyces cerevisiae. S. cerevisiae was inoculated in malt wort media which were added 0, 0.01, 0.1, 0.5 or 1.0% extracts of G. lucidum and fermented at $15^{\circ}C$ for 120 hours respectively. Some results about cell growth, changes of pH and sugarity and alcohol composition during fermentation are as follows; The cell growth of S. cerevisiae was remarkablely increased as G. lucidum extract was added into each step. It was increased to 1.2, 1.5, 1.9 times on added group of 0.1%, 0.5%, 1.0% G. lucidum extract than control group after the fermentation of 120 hours. Content of sugar was systematically low on step of addition of G. lucidum extract after the fermentation of 120 hours but pH was systematically high. The more the quantity of G. lucidum extract was added, the more total alcohol quantity were produced during fermentation. Especially higher alcohol content was more increased about 1.8 times on 1.0% group (219.9 ppm w/v) than on control group (117.26 ppm w/v) after the fermentation of 120 hours.

• Korean Journal of Food Science and Technology
• /
• v.24 no.3
• /
• pp.272-278
• /
• 1992

Takju, a Korean traditional wine, was prepared by using nuruk and Koji which were inoculated with Aspergillus kawachii and Aspergillus shirousamii. Those chemical composition such as alcohols and organic acids were determined with gas chromatography to investigate the variation of its content by the fermentation. Alcohol such as methyl, ethyl, n-propyl, i-butyl, i-amyl alcohol were detected in the most takju mash samples. Alcohol contents in the groups fermented with KNR and SNR were slightly higher than KKR, SKR groups. Lactic acid were concentrated and organic acids such as pyruvic, oxalic, malonic, succinic, maleic, malic, ${\alpha}-keto$ glutaric acid were also detected in the most samples. The pH was lowest in the KKR group. The total acid content was slightly decreased at the later fermentation and was highest in KKR. The content of minerals were highest in the WNR and BNR groups. Throughout fermentation the content of potassium and magnesium varied greatly with the tested groups.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.39 no.3
• /
• pp.443-448
• /
• 2010

This study investigated alcohol fermentation conditions for preparation of tomato wine. The alcohol contents of tomato wines prepared from semi-mature and full-mature tomato were about 11% whereas that of immature tomato was slightly lower (10.6%). When characteristics of tomato alcohol fermentation were examined on pre-treatment conditions, the wine from full mature-crushed whole tomato contained lower alcohol at 10.6% than those of full mature-crushed tomato removed stem and full mature-tomato juice removed stem (about 11%). For the effect of initial sugar, the alcohol content and sugar content of tomato wine increased in proportion to the concentration of initial sugar (8.8~14.4% and $5.5{\sim}9.2^{\circ}Brix$). However, initial titratable acidity and pH did not affect the alcohol contents during fermentation, and suggesting needed to be supplementation for sensory improvement of tomato wine. When the quality characteristics of tomato wine fermented under these optimal conditions were investigated, alcohol content, sugar content, titratable acidity and pH were found to be 11.1%, $6.1^{\circ}Brix$, 0.68% and 3.7, respectively. For alcohol components, the total amounts of methanol and fusel oil were 346 ppm and 313 ppm. In addition, maltose showed the highest level of 264.6 mg% in the free sugar analysis of tomato wine whereas sucrose contained 18.7 mg%.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.39 no.10
• /
• pp.1516-1521
• /
• 2010

This study was conducted to investigate the physicochemical and quality characteristics of alcohol fermentation of tomato. For yeast, Saccharomyces bayanus Lalvin EC-1118 displayed the highest alcohol content (11.8%), whereas titratable acidity and pH did not differ significantly between different yeasts. Alcohol fermentation conducted at higher temperature ($25^{\circ}C$) resulted in higher alcohol content and lower sugar level. The highest alcohol content was produced using 11.4% sucrose and 11.1% fructo-oligosaccharide. These two saccharides were suitable for tomato alcohol fermentation. Lycopene levels were similar regardless of sugar type, and were approximately 4.2 mg%. To improve lycopene content, three types of fruit wine with low-dose lycopene (LDL), medium-dose lycopene (MDL), and high-dose lycopene (HDL) were made. Their alcohol contents were not significantly different (10.0~10.8%). Lycopene contents of LDL, MDL, and HDL wine were 4.25 mg%, 11.40 mg%, and 20.45 mg%, respectively. Therefore, HDL tomato wine should be manufactured.