• Journal of the Korean Recycled Construction Resources Institute
• /
• v.7 no.4
• /
• pp.128-135
• /
• 2012

Autoclaved lightweight concrete, also known as autoclaved aerated concrete(AAC) or autoclaved cellular concrete (ACC), is made with fine silica powder, quik lime, cement, and an Al powder. ALC contains 70~80% air. The lightweight material offers excellent sound and thermal insulation, and like all cement-based materials, is strong and fire resistant. However, ALC have high water absorption, low compressive strength and popout the origin of the low surface strength in its properties. These properties make troubles under construction such as cracking and popout. Thus, this study is to improve the fundamental strength by controls of increasing of admixtures, gypsum and silica powder size. Admixtures make use of metakaolin and silica fume. From the test result, the ALC using admixture have a good fundamental properties compared with plain ALC. Compressive strength, specific strength and abrasion's ratio were improved depending on increasing admixtures ratio's, gypsum and silica powder size.

• Asian-Australasian Journal of Animal Sciences
• /
• v.23 no.12
• /
• pp.1639-1644
• /
• 2010

An experiment was conducted to evaluate the effects of dietary acetyl-L-carnitine (ALC) on growth performance, carcass characteristics, meat quality and lipid metabolism in broilers. A total of 240 one-day-old male Arbor Acres broilers were randomly allocated to 4 dietary treatments (0, 300, 600, and 900 mg/kg dietary ALC supplementation, respectively). Compared with the control treatment, addition of ALC resulted in lower (linear effect, p<0.05) ADG and AFI. Abdominal fat percentage decreased (linear effect, p<0.05) as dietary ALC was increased, but there was no effect on dressing percentage, breast muscle percentage or thigh muscle percentage. Breast muscle pH value 24 h post-mortem increased (linear effect, p<0.05), but there were no significant differences among treatments. However, thigh muscle pH value increased (linear effect, p<0.05) as dietary ALC was increased. Breast and thigh muscle $a^*$ values increased (linear effect, p<0.05), and breast and thigh muscle $b^*$ values decreased (linear effect, p<0.05) with increased ALC in the diet. In addition, breast and thigh muscle shear force value decreased (linear effect, p<0.05) as dietary ALC was increased. Total cholesterol, triglyceride, low-density lipoprotein cholesterol and lipoprotein lipase decreased (linear effect, p<0.05) and free fatty acid and lipase in serum increased (linear effect, p<0.05) with increased ALC in diets.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.27 no.6
• /
• pp.1244-1252
• /
• 1998

The purpose of this study is to evaluate the nutritional status of vitamin and minerals in the patients with alcoholic liver disease and to obtain the materials for nutritional education for alcoholics. The subjects consist of 80 patients with alcoholic liver cirrhosis(ALC) and 12 patients with alcoholic fatty liver(AFL). The control group included 57 alcoholics without liver disease(A), 32 patients with viral liver cirrhosis(VLC) and 194 normal men(NL). Biochemical evaluation of nutritional status was investigated by the analysis of blood samples. The frequency of vitamin B1 deficiency in the ALC, AFL and A groups as indicated by the erythrocyte transketolase activity coefficient were 46.0%, 66.7% and 57.9% respectively. The frequency of vitamin B2 deficiency in the ALC, AFL and A groups as indicated by the erythrocyte glutathione reductase activity coefficient were 9.8%, 8.3% and 38.6% respectively. Vitamin A deficiency was not detected in the alcoholic subjects. The frequency of vi tamin E deficiency in ALC, AFL and A were 96.3%, 66.7% and 86.0% respectively. The levels of plasma lipid peroxidation products were significantly higher in the alcoholic subjects than in the normal subjects. The frequency of subjects below normal range of hemoglobin were 85.0% in ALC, 50.0% in AFL and 31.6% in A. The frequency of copper deficiency in the ALC, AFL and A groups were 48.4%, 16.7% and 17.5% respectively. The frequency of zinc deficiency in the ALC, AFL and A groups were 83.8%, 41.7% and 66.7% respectively. Overall, the vitamin and minerals status of the alcoholic subjects in this study was evaluated to be very poor on the basis of biochemical assessments. The results suggest that alcohol abuse and poor dietary intake could cause malnutrition and may be important risk factors in causing alcoholic liver disease in alcoholics. In addition, vitamin B1, vitamin B2, Cu, Fe and antioxidant supplementation may be effective in nutritional therapy for chronic alcoholics.

• Journal of Animal Environmental Science
• /
• v.4 no.1
• /
• pp.29-36
• /
• 1998

Sawdust is commonly used as a bulking agent for livestock manure composting. Nowadays, demand of sawdust for composting is increasing, so its price is very high and not easy to obtain. In this study in order to examine the effect of autoclaved lightweight concrete (ALC, one of the industrial wastes) on composting of swine manure, ALC (each size of 2, 4, an 8mm) was used as a bulking agent. Swine manure was mixed with each of sawdust and 8mm of ALC in a 1:1 ratio by volume and 2, 4mm of ALC was mixed in a 2:1 ratio by volume. The total period lasted 50 days and was divided into two periods. After mixing bulking agent with swine manure, they were left undisturbed to compost with aeration for an initial period of 20 days. At the end of this period, they were decomposed and mixed to effect a homogenization and then a second period of composting (without aeration) was conducted for 30 days. Temperature during the initial period of swine manure composting were above 70$^{\circ}C$ in all piles and maintained above 55$^{\circ}C$ for 5 days. Temperatures during the second period were relatively lower than the initial period. pH of the compost was increased during the initial period and after 50 days it reached 9.08 in sawdust pile and 9.03 in ALC pile ( 2mm). In nitrogen content of final compost, sawdust pile was higher than ALC piles by 21∼29%.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.05a
• /
• pp.199-200
• /
• 2023

This paper presents a study on the selection of optimal mix proportions for producing lightweight pre-foam concrete as a substitute for Autoclaved Lightweight Concrete (ALC) without the accelerated curing. The study was conducted using a rapid hardening binder made from by-products of the steel industry as the primary raw material. The experimental results established the optimal mix proportions, which included retarder content, water/binder ratio, foam content, and fiber inclusion amount, for the production of lightweight foam concrete. The optimal mix proportion was determined to have a retarder content at the minimum amount required to secure the working time, W/B of 35%, a foam content limited to 65% or less, and a fiber inclusion amount of 0.05% or less.

• Proceedings of the PSK Conference
• /
• 2003.10b
• /
• pp.227.1-227.1
• /
• 2003

Acetyl-L-carnitine (ALC), an endogenous component of L-Carnitine, is the acetyl ester of carnitine that has been reported to be beneficial in depressive disorders and Alzheimer's disease.ALC is so hygroscopic that deliquescence took place when it absorbed moisture by 15%(w/w) in a week and then reached steady-state at 45%(w/w) in 40$^{\circ}C$, 75% RH storage condition. Therefore it is necessary to prevent ALC from absorbing atmospheric moisture. For this purpose, we chose hydroxypropylmethylcellulose phthalate (HPMCP) an enteric polymer, as a film former. (omitted)

• Journal of The Korean Digital Architecture Interior Association
• /
• v.12 no.1
• /
• pp.81-88
• /
• 2012

According to the survey results of the Ministry of Land, Transport and Maritime Affairs in the end of December 2011, the residential buildings was reported as 67.3% of 4,529,464 buildings. Reflected in the national energy policy, the residential building is expected that greater energy savings. To have realized the Passive House Project used the Autoclaved Lightweight Concrete(ALC) material on exterior wall, we take advantage of a very large energy savings. Therefore, this study investigate the patent documents of three major companies, SUMITOMO, CLION, ASAHI KASEI, in Japan. and analyze technical flow and benchmarking patent. As a result, the Sliding method or the Rocking method of ALC panels how to install is to be superior to high-performance drift and safety by a earthquake. And the embedded anchor in panel needs to improve the shape and the strength of bearing. Thus installation technology of the ALC exterior wall investigated in japanese patent documents is expected to the fastening units and anchors.

• Magazine of the Korea Concrete Institute
• /
• v.9 no.2
• /
• pp.137-144
• /
• 1997

The effcct of specific g~avity cont~olled In the .range fiom O.4 to 0.7 by particle size and added amount of A1 powder in the presence or absence of water repellent agent on the physical properties of ALC was examined to evaluate frost resistance and durability. The compressive sttcngth and the tensile strength are increased and independency with water repellent agent when the specific gravity is increased in the range from 0.4 to 0.7. According as the added amount of water repellent agent was increased. frost resistance was improved and absorption ratio was decreased. ALC produced from fine Al powder has a low volume reduction by scaling and a sound apperance after freezing/thawing test and top surface freezing test.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.12 no.2
• /
• pp.121-127
• /
• 2024

In this study, the applicability of replacing DG(Desulfurized Gypsum) from oil refinery with CCCMs(Carbon dioxide Conversion Capture Materials) as an ALC(Auto-claved LIghtweight Concrete) raw material was examined, and basic properties of ALC was measured. The main chemical components of DG and CCCMs were CaO and SO₃, and an increase in LOI(Loss of ignition) due to mineral carbonation reaction was verified. The crystalline phases of CCCMs were CaCO₃, CaSO₄, Ca(OH)₂, and CaSO₄·2H₂O. When DG, a raw material for ALC production, was replaced with CCCMs, foaming height, pore shape, absolute dry gravity, and compressive strength results measured similar for all binders. In addition, the formation of tobermorite which is main crystalline phase of ALC was shown for all specimens in microstructural analysis.

• Korean Journal of Clinical Pharmacy
• /
• v.11 no.2
• /
• pp.49-56
• /
• 2001

Acetyl-L-carnitine (ALC), an endogenous component of the L-carnitine family, is a naturally existing molecule synthesized from L-carnitine (LC) by carnitine acetyl transferase. ALC has been shown to improve the cognitive performance of patients suffering from dementia of the Alzheimer's type and proposed for treating Alzheimer's disease in pharmacological doses. The purpose of the present study was to evaluate the bioefuivalence of two ALC tablets, $Nicetile^{TM} (Dong-A Pharmaceutical Co.) and $L-Cartin^{TM}$ (Kuhn Il Pharmaceutical Co.), according to the guidelines of Korea Food and Drug Administration (KFDA). The ALC release from the two ALC tablets in vitro was tested using KP VII Apparatus II method in various dissolution media (pH 1.2, 6.0 and 6.8). Twenty six normal male volunteers, $24.46\pm3.67$ years in age and $64.45\pm5.54$ kg in body weight, were divided into two groups and a randomized $2\times2$cross-over study was employed. After one tablet containing 500 mg of ALC was orally administered, blood was taken at predetermined time intervals and the concentrations of ALC in serum were determined using HPLC with fluorescence detector. Because of the presence of endogenous ALC, the calibration was performed using dialyzed serum. The dissolution profiles of the two ALC tablets were similar in all the dissolution media. The pharmacokinetic parameters such as $AUC_t,\;C_{max}\;and\;T_{max}$ were calculated and ANOVA was utilized for the statistical analysis of the parameters. The results showed that the differences in $AUC_t,\;C_{max}\;and\;T_{max}$ between two tablets were $0.35\%,\;0.93\%\;and\;2.34\%$ respectively, when calculated against the $Nicetile^{TM} tablet. The powers $(1-\beta)\;for\;AUC_t$ , and Cmax were $98.72\%\;and\;85.48\%$, respectively. Minimum detectable differences $(\Delta)\;at\;\alpha=0.05\;and\;1-\beta=0.8$ were less than $20\%,\;(e.g.,\;13.21\%\;and\;18.42\%\;for\;AUC_t,\;and\;C_{max}$ respectively). The $90\%$ confidence intervals were within $\pm20\%\;(e.g.,\;-7.38\sim8.09\;and\;-9.86\sim11.72\;for\;AUC_t,\;and\;C_{max}$, respectively). These two parameters met the criteria of KFDA for bioequivalence, indicating that $L-Cartin^{TM}$ tablet is bioequivalent to $Nicetile^{TM} tablet.