• Journal of the Korean Society of Safety
• /
• v.24 no.3
• /
• pp.13-18
• /
• 2009

This paper is purposed to develop DAQ H/W, S/W and DB which can be used in developing electrical fire alarm system or in analyzing electrical fire cause, by detecting and monitoring precursor signals which have high possibility leading to electrical fire on electrical distribution wires. In this paper, developed was DAQ H/W adopting the C8051FXXX CPU which can analyze the measurement signals of current and voltage in electrical distribution wires, other CPU was investigated in view of the best digital sampling rate on the basis of previous researches for electrical fire alarm system. Also, the S/W which can interface with DAQ H/W's communication protocol and can be applied for electrical fire causes analysis, are embodied by LabVIEW. The combined DAQ H/W and S/W could analyze efficiently normal as well as abnormal electrical signals such as RMS value, instantaneous value of current and voltage, frequency signals etc, on the electrical wires. Also, DB system was constructed for recording various analysis results for precursor signals including voltage and current signals. The results by simulator and experiment showed that the suggested scheme with DAQ H/W, S/W and DB in this paper has high usability.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.16 no.10
• /
• pp.969-976
• /
• 2004

Building energy saving is one of the most important issues in these days. Energy saving control strategies should be developed properly to achieve the saving. One of such area we could apply is the HVAC (Heating, Ventilation and Air-Conditioning) system. Through the optimal control algorithm for building energy management system (EMS), you can not only save the cost of building energy, but also protect HVAC system components against the unexpected condition. In order to verify the effectiveness of building energy saving, field test was accomplished for several months at 'A' building. And to get the measured data, remote control was used. If the remote control is used in BAS (Building Automation System), control and monitoring can be done for all of the building systems, such as HVAC, power, lighting, security and fire-alarm etc. anywhere any time. Using the remote control, Control and monitoring is possible for the testing system without going there. As the results of field test, we could reduce $5{\sim}10\%$ of the building energy cost.

• Journal of Positioning, Navigation, and Timing
• /
• v.2 no.1
• /
• pp.91-100
• /
• 2013

This paper introduces an indoor sensor fusion wireless communication device which provides the Location Based Service (LBS) using fire prevention facility. The proposed system can provide information in real time by optimizing the hardware of Wi-Fi technology. The proposed system can be applied to a fire prevention facility (i.e., emergency exit) and provide information such as escape way, emergency exit location, and accident alarm to smart phone users, dedicated terminal holders, or other related organizations including guardians, which makes them respond instantly with lifesaving, emergency mobilization, etc. Also, the proposed system can be used as a composite fire detection sensor node with additional fire and motion detect sensors.

• Proceedings of the KIEE Conference
• /
• 2005.10b
• /
• pp.201-203
• /
• 2005

The best method to study language is to talking with a native speaker. A voice recognition technology can be used to develope a language study machine. SD(Speaker dependant) and SI(speaker independant) voice recognition method is used for the language study machine. MP3 Player. FM Radio. Alarm clock functions are added to enhance the value of the product. The machine is designed with a DSP(Digital Signal Processing) chip for voice recognition. MP3 encoder/decoder chip. FM tumer and SD flash memory card. This paper deals with the application of SD ad SD voice recognition. flash memory file system. PC download function using USB ports, English conversation text function by the use of SD flash memory. LCD display control. MP3 encoding and decoding, etc. The study contents are saved in SD flash memory. This machine can be helpful from child to adult by changing the SD flash memory.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.14 no.5
• /
• pp.2043-2060
• /
• 2020

Developed from Digital Multimedia Broadcasting (DMB), DMB+ changes the application focus fundamentally. The plus symbol "+" indicates that DMB+ is no longer for digital radio/videos, instead it works as a general data transmission technique. The merits of wireless transmission, broad coverage, high quality, information security and low building/maintenance cost make DMB+ suitable for a wide range of applications with numerous terminals and users, such as public information release, alarm and administration etc. The concept of DMB+ base station enables DMB+ to be used in building independent networks and for remote control and management, as well as for Industry 4.0. DMB+ will access into a new field that till now has been dominated by communication techniques, will open a huge commercial opportunity.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.577-578
• /
• 2016

This paper presents a method of vehicle safety system using a pulse sensor which will be able to occurs drowsy driving accident when people driving. The proposed vehicle safety system alarms according to the driver drowsy condition, therefore the driver prevent the direct and $2^{nd}$ accident beforehand cognitive unexpected and dangerous accident using vehicle safety system.

• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.6
• /
• pp.568-573
• /
• 2007

Environmental information (temperature, humidity, vibration, $CO_2$, gas leakage, etc.) of building is an essential item to manage and monitor a building. For intelligent building, it is necessary to get temperature and illumination information to save energy and crack information to prevent structural problems. Moreover, temperature and gas leakage information to alarm a tire precaution, or humidity information to maintain comfortable environment. However, there have not been many researches on systems for gathering environmental information and building maintenance due to high costs. In this paper, wireless sensor network technology is applied to collecting building environmental information. Wireless sensor network is one of the latest issues and has low-power consumption, low-cost, self-configuration features.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.7C
• /
• pp.723-727
• /
• 2002

In this paper a new remote control system for operating indoor gas(LPG) range safely based on PLM(Power Line Modem) and telephone is developed because it would make disasters of properties and lives by user's carelessness or worker's bad installation, etc. The system includes the following elements: a telephone line interface system for user to call from the outdoors to the indoors, a communication system using the power line as a communication media, a system of cutting off gas and a alarm system.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2022.11a
• /
• pp.890-892
• /
• 2022

스마트폰 모바일 앱을 이용한 범죄 예방 시스템은 다양하게 제안되고 개발되어 왔으나, 생활 안전의 유지를 위한 경찰 등 공공 서비스를 위한 인력은 매우 부족한 실정이다. 본 연구는 스마트폰 이용자가 "범죄예방 이론"에 따라 "범죄 취약환경에 및 감시 등 방어기제 부재" 상황에서 신속하게 벗어날 수 있도록 도움을 주는 앱 시스템 필요성 인식에 따라 "긴급 상황 인식 및 자동 알림 신고 앱 시스템"을 기획하여 개발한 결과를 기술하였다.

• Journal of Satellite, Information and Communications
• /
• v.8 no.4
• /
• pp.89-94
• /
• 2013

This paper presents color video flame detection algorithm based on wavelet transform to remove detection of flickering non-flame objects. Conventional flame detection algorithms consist of simple or mixed functions using colors, temporal and spatial characteristics. But those algorithms detect non-flame objects as flame regions sometimes. False alarm reasons are flame-like objects with regular flickering lights such as car signal lamps, alarm lights etc. The proposed algorithm is to reduce false detection which is occurred in periodic flickering lights. At first, It segments the candidate flame regions by using frame difference, flame colors. Then it distinguish flame regions and non flame regions including flickering car lights by analyzing wavelet coefficients. Computer simulation results showed that the proposed algorithm removes false detection due to the periodic flickering lamps by performing 97.9% of correct detection rate while false detection rate is 7.3%.