• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.22 no.2
• /
• pp.91-99
• /
• 2012

Airborne chlorpyrifos concentrations in formulation workplaces have not been determined in Korea. The aim of the study was to evaluate chlorpyrifos concentrations of air in a formulation workplace and recognize the RBC cholinesterase activities for the formulation workers. 30 air samples (personal or area sampling) were collected and bood samples from 10 workers were collected for RBC chlorinesterase (RBC AChE) activity in a factory on May 2008. Air samples were collected by the National Institute for Occupational Safety and Health (NIOSH) method and were analyzed by GC-MS. Airborne chlorpyrifos concentrations ranged from 0.003 to $12.90mg/m^3$ and geometric mean (GM) was $0.15\;mg/m^3.$ Compared to Korean Occupational Exposure Limit (KOEL) of 0.1 (2011) or $0.2\;mg/m^3$ (2008), at 95% confidence, airborne concentrations exceeded the KOEL 69.7% or 56.1% of the time or less, indicating that this concentration level was unacceptable according to exposure assessment using a LogNorm2$^{(R)}$. Since the workers were continually at work on the organophosphate or carbamate pesticides formulation, individual baseline for RBC AChE activity was not determined. As the results of comparison with reference average value of RBC AChE activity, it was found that a worker was below 70% RBC AChE activity and five workers were abnormal.

• Toxicological Research
• /
• v.27 no.3
• /
• pp.137-141
• /
• 2011

This study was conducted to assess the exposure risk through inhalation to baby powder for babies and adults under simulated conditions. Baby powder was applied to a baby doll and the amount of baby powder consumed per application was estimated. The airborne exposure to baby powder during application was then evaluated by sampling the airborne baby powder near the breathing zones of both the baby doll and the person applying the powder (the applicator). The average amount of baby powder consumed was 100 mg/application, and the average exposure concentration of airborne baby powder for the applicator and baby doll was 0.00527 mg/$m^3$ (range 0.00157~0.01579 mg/$m^3$) and 0.02207 mg/$m^3$ (range 0.00780~0.04173 mg/$m^3$), respectively. When compared with the Occupational Exposure Limit of 2 mg/$m^3$ set by the Korean Ministry of Labor and the Threshold Limit Value (TLV) of 2 mg/$m^3$ set by the ACGIH (American Conference of Governmental Industrial Hygienists), the exposure concentrations were much lower. Next, the exposure to asbestos-containing baby powder was estimated and the exposure risk was assessed based on the lung asbestos contents in normal humans. As a result, the estimated lung asbestos content resulting from exposure to asbestos-containing baby powder was found to be much lower than that of a normal Korean with no asbestos-related occupational history.

• Environmental Analysis Health and Toxicology
• /
• v.19 no.2
• /
• pp.169-176
• /
• 2004

ETS (environmental tobacco smoke) is composed of exhaled mainstream smoke (MS) from the smoker, sidestream smoke (SS) emitted from the smoldering tobacco between puffs and contaminants that diffuse through the cigarette paper and mouth between puffs. These emissions contain both vapor phase and particulate contaminants. ETS is a complex mix of over 4,000 compounds. This mix contains many known or suspected human carcinogens and other toxic agents. More of these toxic compounds are found in SS than in MS. Workplace exposure to ETS can result in significant smoke intake, and passive smoke exposure may be related to impair respiratory function and an increase risk of lung cancer in nonsmokers. For nonsmokers sharing a work environment with cigarette smokers, the workplace must be considered hazardous independently of any specific industrial toxic exposure. The risk is particularly important when a high percentage of the workers smoke or where smokers and nonsmokers work in poorly ventilated areas. Nicotine is converted in the body to cotinine; cotinine therefore can be used as an indirect measure of a person's recent exposure to tobacco smoke. Levels of nicotine in hair and levels of cotinine in body fluids (saliva and urine) have been shown to increase with increasing environmental nicotine levels and with self-reported ETS exposure. The measurement of nicotine or cotinine in hair may be more appropriate for longer-term exposure to tobacco. The purpose of this study is to comparing airborne nicotine levels and hair cotinine level in restaurant workers. Concentration of airborne nicotine and hair nicotine (and cotinine) is closely related to exposed frequency of sidestream smoke in the workplace. Nicotine in hair is a better predictor of airborne nicotine than hair cotinine. Hair nicotine can be a useful tool to assess ETS exposure interventions. It may have limiting levels of ETS exposure by placing regulatory restrictions on smoking in workplaces and in public spaces.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.18 no.1
• /
• pp.32-40
• /
• 2008

Methyl bromide has been used as a representative fumigant for quarantine, and several poisoning cases have occurred recently by this chemical in Korea. The purpose of this study is to evaluate workers' exposures to airborne methyl bromide in the importing and exporting plant products quarantine companies. Air samples were collected 400/200 mg Anasorb 747TM and were analyzed by gas chromatograph /flame ionization detector according to the Occupational Safety and Health Agency (OSHA) Method PV2040. Geometric mean (GM) and arithmetic mean (AM) of total 27 workers' exposure concentrations to airborne methyl bromide were 1.12 ppm and 0.24 ppm, respectively. Two exposures(12.1 ppm and 12 ppm as 8hr-TWA) of total 27 workers' exposures exceeded the Korean standard (5 ppm) of Ministry Labor, while 4 exposures (15%) exceeded the Threshold Limit Value (TLV) (1 ppm) of American Conference of Governmental Industrial Hygienists (ACGIH). Seven samples (11%) of total 63 short-term air samples exceeded the OSHA Permissible Exposure Limit (PEL) 20 ppm (Ceiling). The opening (management) task in wood fumigation by tent showed the highest short-term exposure concentrations (AM: 18.6 ppm, GM: 0.58 ppm, maximum: 340.7 ppm). The maximum level in treatment task of the same process was 2.01 ppm. Methyl bromide concentrations in opening operation was significantly higher than that in treatment operation (p<0.05). In conclusion, the GM of workers' 8hr-TWA exposures to airborne methyl chloride in the importing/exporting plant quarantine industry was estimated below the ACGIH TLV (1 ppm). However, opening task in the fumigation of wood being covered with tent or fumigation of pant products in container showed the levels exceeding ACGIH TLV (1 ppm), and opening task in the fumigation of wood being covered with tent showed the level exceeding the Korean standard of Ministry of Labor (5 ppm).

• Journal of Korean Society for Atmospheric Environment
• /
• v.23 no.E1
• /
• pp.1-9
• /
• 2007

In Korea, there is only a limited amount of information currently available on the levels of airborne bacteria and fungi of cattle sheds, although certain portions of people are potentially exposed to these bioaerosols in cattle sheds. Accordingly, the current study measured them inside cattle sheds, inside and outside farmers' houses near the sheds, and/or inside residential houses far away from the sheds during winter, 2004 and summer, 2005. The airborne bacteria and fungi were detected in most samples in the cattle farmers' houses as well as in the cattle sheds. Aspergillus, Cladosporium, and Penicillium, which have been associated with adverse health effects, were three most prevalent fungal genera, and they took most of the total fungi (more than 69%). The microbial concentrations measured inside the cattle sheds were comparable to those in other reports. Nevertheless, the present arithmetic and geometric mean (GM) microbial concentrations exceeded the Korean guideline for total airborne bacteria at medical facilities ($800\;CFU\;m^{-3}$), the current GM residential indoor concentrations at houses, and the residential indoor levels reported in other countries. The present findings suggest the need for a strategy to reduce Korean cattle farmers' exposure to these microorganisms. In contrast to the microbes, it is suggested that the cattle shed is not an important microenvironment for $PM_{10}$ exposure. Two characteristics examined in this study (seasonal variation and summer survey period, i.e., temperature and humidity) were all important for the cattle farmers' occupational exposure to airborne microbes. The lack of constancy between highest and lowest concentrations of bioaerosols over the survey period further suggests the necessity of performing a long-term survey to better examine farmer exposure levels and their variability.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.7 no.2
• /
• pp.171-180
• /
• 1997

The objectives of this study were both 10 discuss the sampling method for airborne metalworking fluids(MWF)' mist and 10 suggest measures to minimize worker's exposure to carcinogen contained in metalworking fluids. In order to measure airborne MWF mist, it seems to be appropriate to use NIOSH Method #0500(filler weight) rather than NIOSH Method # 5026(analysis by FTIR). Because MWF mist on PVC filter evaporated and migrated during sampling, worker's exposure to MWF could be underestimated. So, when evaluating worker's exposure to MWF mist, other environmental conditions also must be considered. Enclosure and local exhaust ventilation system seems to he the most effective measure and must be constructed with process facility. In order to control worker exposure to carcinogens contained in MWF, distillation type and condition for crude oil, PAH concentration in MWF, and viscosity index of MWF must legally be described.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.34 no.1
• /
• pp.98-105
• /
• 2024

Objectives: The purpose of this study was to identify the exposure level of airborne hexavalent chromium in the plating industry and the exposure level compared to domestic and international occupational exposure limits. Methods: A total 92 samples were collected from ten industrial plating sites. Hexavalent chromium samples were collected using a three-stage cassette equipped with a 37 mm, 5 ㎛ pore size PVC filter. The analysis was performed by ion chromatography. Results: The geometric mean of hexavalent chromium concentration in the plating industry was 0.052 ㎍/m², and it was found that the average exposure level was 0.8 times the South Korean exposure limit. When applying the US ACGIH TLV, however, the average concentration was more than twice as high. Conclusions: The South Korean exposure limit for hexavalent chromium needs to be strengthened due to significant differences in exposure levels according to domestic and international occupational exposure limits. Furthermore, respiratory and dermal sensitization should be labeled.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.21 no.1
• /
• pp.55-61
• /
• 2011

Cyclonite is a white powder and is very explosive. It can cause seizures (a problem of the nervous system) in human and animals when large amounts are inhaled or eaten. Research papers for workers exposure assesment of the cyclonite are very a few in the world. A field study was conducted at explosive compounds and bomb manufacturing companies to evaluate workers exposure to cyclonite. The airborne average concentration of cyclonite in explosive compounds manufacturing company was $4.10{\mu}g/m^3$(range: ND - $59.92{\mu}g/m^3$), and that of cyclonite in bomb manufacturing company was $31.49{\mu}g/m^3$(range: ND - $291.41{\mu}g/m^3$). Package process and assembly process in both companies were considered the high potential of exposure to cyclonite. Even though all airborne concentrations of cyclonite were lower than occupational exposure standard (MOEL: $500{\mu}g/m^3$), exposure to cyclonite can also occur through dermal contact during manufacture, handling, and clean-up of cyclonite. So control measures for protecting skin absorption of cyclonite were needed for preventing adverse health effect by cyclonite exposure.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.20 no.4
• /
• pp.274-281
• /
• 2010

The objectives of this study are (a) to investigate the distribution patterns and exposure concentrations of biological agents in sawmill industries and (b) to compare sampling methods of biological agents. The representative processes of 5 sawmills were selected to measure total airborne bacteria, fungi, endotoxin as well as dust. Airborne bacteria and fungi were measured with one stage impactor, six stage impactor and gelatin filteration methods. Endotoxin was collected with polycarbonate filters and analysed by kinetic chromogenic Limulus Amebocyte Lysate method. Geometric mean levels of airborne bacteria, fungi, endotoxin and dust were 1,864 CFU/$m^3$, 2,252 CFU/$m^3$, 31.5 EU/$m^3$ and 2.4 mg/$m^3$. The ratios of indoor/outdoor concentrations were 3.7 for bacteria, 4.1 for fungi, 3.3 for endotoxin and 9.7 for dust. The respiratory fractions of bacteria were 68.0, 50.9, 49.2 and 45.1% in band-saw, table-saw, rip-saw process and outdoor air. The respiratory fractions of fungi were 78.7, 90.8, 87.5 and 84.8% in band-saw, table-saw, rip-saw process and outdoor air, respectively. There was no significant differences in bacterial concentrations among single stage, six stage impaction and filteration methods. But, fungal concentrations measured with filtration methods were significantly higher than those with impaction methods. Geometric mean levels of airborne bacteria and fungi were higher than the OSHA guideline values of 1,000 CFU/$m^3$. The respiratory fractions of fungi were above 75%. The concentrations of biological agents were significantly different among culture-based sampling methods. In the exposure assessments of biological agents, further studies are needed for the comparisons of diverse sampling methods and the investigations of environmental factors.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.23 no.2
• /
• pp.123-136
• /
• 2013

Objectives: This paper was prepapred to report airborne asbestos fiber concentrations in asbestos textile, brake-lining, commutator, and building materials manufacturing industries, and some other asbestos related industries in Korea from 1994 to 2006. Methods: Airborne asbestos data that have been sampled and analyzed in the above industries during 1994-2006 were collected. These data were reviewed to scrutinize the qualified data based on the records such as sampling and analyzed method and quality control procedures. All asbestos data were generated using the National Institute for Occupational Safety & Health (NIOSH) Method 7400. Results: Average concentration of asbestos fiber was 2.14 fibers/cc(0.02-15.6 fibers/cc) in the asbestos textile industry, 0.26 fibers/cc(0.01-1.01 fibers/cc) in the building-materials industry, 0.15 fibers/cc(0.01-0.93 fibers/cc) in the brake-lining manufacturing industry, and 0.14 fibers/cc(0.03-1.36 fibers/cc) in the commutator producing industry. For these industries, the percentage of samples of which asbestos fiber concentrations above the limit of exposure(0.1 fibers/cc) was 97.6% in the asbestos textile industry, 62.3% in the building-materials industry, 53.5% in the brake-lining manufacturing industry, and 34.3% in the commutator producing industry. Asbestos fiber concentration was below the limit of exposure in the gasket producing, petrochemistry, musical instrument producing industries, and the brake-lining exchange operations. Conclusions: Airborne asbestos fiber level in the asbestos textile, brake-lining producing, commutator and building-material producing industries was above the limit of exposure, but in the gasket producing, petrochemistry, musical instrument producing industries and the brake-lining exchange operations were below the limit of exposure.