• 한국산업융합학회 논문집
• /
• 제15권2호
• /
• pp.49-54
• /
• 2012

With the improvement of industrial society, the high quality electrical energy, simplification of operation and maintenance, ensuring reliability and safety are being required. This paper reviews a basic data of the surface discharge characteristics for teflon resin in not only pure $N_2$, $N_2:O_2$ mixture gas and Dry-Air as being focused on environmentally friendly insulating Gas also $SF_6$. Used electrodes are Knife to Knife. With the changing distance of electrodes and pressure, we can find it, surface discharge voltages and surface dielectric strengths, respectively. Surface discharge Voltages of $N_2:O_2=80:20$ mixture gas are more higher than the $N_2:O_2$ Mixture gases.

• 한국표면공학회지
• /
• 제48권5호
• /
• pp.194-198
• /
• 2015

A blade-abrading method was newly developed for the preparation of clean Mg alloy surface and reported for the first time in detail in this paper. The blade-abrading method includes abrading of the Mg alloy surface with a sharp blade or knife to remove the surface oxide and contaminants on the skin of Mg alloys mechanically, thereby providing very clean surface of Mg alloys. The clean surface prepared by the blade-abrading method in the air was found to be covered with thin and dense air-formed oxide films. Based on the experimental results obtained in this work, it is concluded that the newly developed blade-abrading technique is a very simple and useful pretreatment method which can provide clean and well-defined surface for the following surface treatments.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.121.5-121
• /
• 2001

For the last decade, remarkable progress in the coating weight uniformity of hot dip galvanized product has been made to overcome the tightening quality constraints and produce cost-effective galvanized products. This progress results from research and development works for more efficient air knife, more accurate model of coating process, more precise measurement of coating weight and more efficient control logics. The activities for an efficient mathematical model to predict coating weight and several control logics which has been implemented on the No.1 CGL, No. 2 CGL, and PGL at KwangYang Steel Works are reviewed in this article.

• 한국추진공학회지
• /
• 제12권1호
• /
• pp.1-6
• /
• 2008

실매질 시험용 30톤급 터보펌프 터빈의 성능시험을 수행하였다. 날카로운 익단의 동익과 원호 익단의 동익을 가진 두 종류의 터빈로터에 대한 성능시험을 수행하였으며 아울러 다양한 압력비와 회전수에 따른 터빈 축추력의 변화를 동시에 측정하였다. 시험결과, 날카로운 익단의 터빈로터가 원호익단을 가진 터빈로터에 비해 설계 상사점에서 약 1% 높은 효율을 나타내는 것으로 측정되었다. 터빈 축추력은 회전수에 따라 선형적으로 변화하며 터빈 압력비에 큰 영향을 받는 것으로 나타났다.

• 한국식품위생안전성학회지
• /
• 제13권4호
• /
• pp.425-429
• /
• 1998

하류 처리물량 20톤 규모의 중급 돈육처리장 3군데를 대상을 장갑, 칼갈이, 칼, 도마, 운송벨트, 박피기, 작업장내 공기, 도체, 부분육의 Listeria monocytogenes의 오염실태를 조사하였다. 총 시료수는 330건으로 시료는 작업이 진행되는 동안 면봉으로 대상 부위의 표면 100㎠를 채취하였으며 검사결과는 다음과 같다. 1. 작업환경 시료 234건 중 Listeria monocytogenes 17.5% 기타 Listeria spp.는 34.2%의 분리율을 나타내었다. 2. 시료별 Listeria monocytogenes 분리율을 장갑 20.8%, 칼갈이 21.3%, 칼 14.6%, 도마 20.8% , 운송벨트 28.6%, 박피기 16.7%이었고, 작업장내 공기에서는 분리되지 않았다. 3. Listeria monocytogenes 오염은 원료육인 도체에서 8.5% 인 반면 최종생산 돈육에서는 14.6%가 검출되어 작업과정에서 오염이 발생되고 있음을 알 수 있었다(p<0.05). 4. 작업환경에서 분리한 41건 Listeria monocytogenes 혈청형 분포는 4b 36.6%, 1/2a 24.4%, 4ab 17.0%, 4a 4.9%, 1/2c와 4c는 공히 2.4%이었고, 도체 및 최종생산 원료육에서는 4b, 1/2a, 4ab형이 검출되었다.

• Corrosion Science and Technology
• /
• 제9권4호
• /
• pp.159-163
• /
• 2010

Precise coating weight control is very important issue on quality and minimizing operating costs on continuous galvanizing line. These days, many steel making companies are having a new understanding of cost importance by rise raw material prices and customer's requirement for cost reduction. Dongbu steel also meets these situations and decided to develop the technologies. Dongbu Steel developed Integrated coating weight control system jointly with Objective Control Ltd. and installed 2CGL and 4CGL. Several technological functions were developed and realized to achieve true hands-off operation and maximum cost benefit by combining model-based preset and dynamic prediction models. We also installed it on 1 CGL on April, 2008. This paper will present the interface, functions and application result of the integrated coating weight control system including Zn saving and coating weight uniformity.

• 한국표면공학회지
• /
• 제34권2호
• /
• pp.115-124
• /
• 2001

Gas wiping process of continuously hot-dip galvanized coating on steel strip has noise and coating problems. To improve the qualify of product, characteristics of air flow on the steel surface must be investigated. In this paper, fluid dynamic model of the gas flow is setup and solved numerically using STAR-CD. The effects of edge baffle, distance between steel plane edge and baffle, inlet pressure, and gap between air knife and strip steel surface are investigated, and it is concluded that edge baffle can reduce over-coating and edge built-up.

• Nuclear Engineering and Technology
• /
• 제55권8호
• /
• pp.2935-2940
• /
• 2023

A polystyrene phantom was developed following the guidance of the International Atomic Energy Association (IAEA) for gamma knife (GK) quality assurance. Its performance was assessed by measuring the absorbed dose rate to water and dose distributions. The phantom was made of polystyrene, which has an electron density (1.0156) similar to that of water. The phantom included one outer phantom and four inner phantoms. Two inner phantoms held PTW T31010 and Exradin A16 ion chambers. One inner phantom held a film in the XY plane of the Leksell coordinate system, and another inner phantom held a film in the YZ or ZX planes. The absorbed dose rate to water and beam profiles of the machine-specific reference (msr) field, namely, the 16 mm collimator field of a GK Perfexion^TM or Icon^TM, were measured at seven GK sites. The measured results were compared to those of an IAEA-recommended solid water (SW) phantom. The radius of the polystyrene phantom was determined to be 7.88 cm by converting the electron density of the plastic, considering a water depth of 8 g/cm². The absorbed dose rates to water measured in both phantoms differed from the treatment planning program by less than 1.1%. Before msr correction, the PTW T31010 dose rates (PTW Freiberg GmbH, New York, NY, USA) in the polystyrene phantom were 0.70 (0.29)% higher on average than those in the SW phantom. The Exradin A16 (Standard Imaging, Middleton, WI, USA) dose rates were 0.76 (0.32)% higher in the polystyrene phantom. After msr correction factors were applied, there were no statistically significant differences in the A16 dose rates measured in the two phantoms; however, the T31010 dose rates were 0.72 (0.29)% higher in the polystyrene phantom. When the full widths at half maximum and penumbras of the msr field were compared, no significant differences between the two phantoms were observed, except for the penumbra in the Y-axis. However, the difference in the penumbra was smaller than variations among different sites. A polystyrene phantom developed for gamma knife dosimetry showed dosimetric performance comparable to that of a commercial SW phantom. In addition to its cost effectiveness, the polystyrene phantom removes air space around the detector. Additional simulations of the msr correction factors of the polystyrene phantom should be performed.

• 한국표면공학회지
• /
• 제50권3호
• /
• pp.147-154
• /
• 2017

This research was conducted to investigate the electrochemical properties of the thin air-formed oxide film-covered AZ31 Mg alloy. Native air-formed oxide films on AZ31 Mg alloy samples were prepared by knife-abrading method and the changes in the electrochemical properties of the air-formed oxide film were investigated in seven different electrolytes containing the following anions $Cl^-$, $F^-$, $SO{_4}^{2-}$, $NO_3{^-}$, $CH_3COO^-$, $CO{_3}^{2-}$, and $PO{_4}^{3-}$. It was observed from open circuit potential (OCP) transients that the potential initially decreased before gradually increasing again in the solutions containing only $CO{_3}^{2-}$ or $PO{_4}^{3-}$ ions, indicating the dissolution or transformation of the native air-formed oxide film into new more protective surface films. The Nyquist plots obtained from electrochemical impedance spectroscopy (EIS) showed that there was growth of new surface films with immersion time on the air-formed oxide film-covered specimens in all the electrolyte. The least resistive surface films were formed in fluoride and sulphate baths whereas the most protective film was formed in phosphate bath. The potentiodynamic polarization curves illustrated that passive behaviour of AZ31 Mg alloy under anodic polarization appears only in $CO{_3}^{2-}$, or $PO{_4}^{3-}$ ions containing solutions and at more than $-0.4V_{Ag/AgCl}$ in $F^-$ ion containing solution.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2017년도 춘계학술대회 논문집
• /
• pp.96.2-96.2
• /
• 2017

This research was conducted to investigate the electrochemical properties of the thin air-formed oxide film-covered AZ31 Mg alloy. In this work, native air-formed oxide films on AZ31 Mg alloy samples were prepared by knife-abrading method and the changes in the electrochemical properties of the air-formed oxide film were investigated in seven different electrolytes containing the following anions $Cl^-$, $F^-$, $SO{_4}^{2-}$, $NO_3{^-}$, $CH_3COO^-$, $CO{_3}^{2-}$ and $PO{_4}^{3-}$. It was observed from open circuit potential (OCP) transients that the potential initially decreased before gradually increasing again in the solutions containing only $CO{_3}^{2-}$ or $PO{_4}^{3-}$ ions, indicating the dissolution or transformation of the native air-formed oxide film into new more protective surface films. The Nyquist plots obtained from electrochemical impedance spectroscopy (EIS) showed that there was growth of new surface films with immersion time on the air-formed oxide film-covered specimens in all the electrolytes; the least resistive surface films were formed in fluoride and sulphate baths whereas the most protective film was formed in phosphate bath. The potentiodynamic polarization curves illustrated that passive behaviour of AZ31 Mg alloy under anodic polarization appears only in $CO{_3}^{2-}$ or $PO{_4}^{3-}$ ions containing solutions and at more than $-0.4V_{Ag/AgCl}$ in $F^-$ ion containing solution.