• Membrane and Water Treatment
• /
• 제6권2호
• /
• pp.95-102
• /
• 2015

The presented research is about characterization of Cellulose Triacetate (CTA) based Polymer Inclusion Membranes (PIMs) which incorporated the commercial extractant Aliquat 336, Tributylphosphate (TBP) as modifier and 2-Nitro Phenyl Pentyl Ether (NPPE) as plasticizer, for the preparation of the membranes. Chemical and physical characteristics of the synthesized membranes especially membrane thickness and side difference effects were investigated. Different surface structures and membrane thickness affect the extraction efficiency of membranes. Membrane extraction experiments were studied where the glass-facing surface of the membranes placed next to feed phase and the air-facing surface to stripping phase. The membrane was characterized by means of AFM, FT-IR and SEM.

• Journal of Ship and Ocean Technology
• /
• 제10권1호
• /
• pp.1-9
• /
• 2006

The resistance reduction by an air lubrication effect of a large air cavity covering the hull bottom surface and the similarity relations involved have been investigated with a series of towing tank tests of three geometrically similar models. The test results of geometrically similar models have indicated that a large air cavity was formed beneath the bottom having a backward-facing step by artificially supplying air is effective for resistance reduction. The areas of air cavity and the required flow rates of air are directly related to the effective wetted surface area. The traditional extrapolation methods seem to be applicable to the estimation of the resistance in the tested range if corrections are made to account the changes in the frictional resistance caused by the changes in the effective wetted surface area. To investigate the effectiveness of air lubrication in improving the resistance performance of a practical ship, a small test boat having a backward-facing step under its bottom has been manufactured and speed trials in a river have been performed. Air has been supplied artificially into the downstream region of the bottom step to form a large air cavity covering the bottom surface. The results have confirmed the practical applicability of air lubrication for the resistance reduction of a small high-speed boat.

• 대한설비공학회지:설비저널
• /
• 제8권4호
• /
• pp.254-259
• /
• 1979

Radiation data on south-facing surfaces required for the simplified design pro cedures for solar energy systems, have been computed using the method by Liu and Jordan. For the five localities of South Korea selected from reference 6, the factor R for the conversion of the monthly average daily total radiation on a horizontal surface to that on an inclined surface is presented in Table 5. For the other localities, the convession factor R can by computed using Table 2 through Table 4.

• 오토저널
• /
• 제10권1호
• /
• pp.26-32
• /
• 1988

A study has been conducted experimentally on the natural convection heat transfer characteristics of fin arrays on a horizontal flat plate in air. The effects of fin heights and Rayleigh numbers are mainly investigated. The experimental results are as follows; 1. The mean fin and mean total Nusselt numbers increase as dimensionless fin heights increase at 0.67.leg.H/s.leg.1.67. The mean plate Nusselt numbers increase in case of upward facing fins, but they decrease in case of downward facing fins. 2. The mean Nusselt numbers increase as Rayleigh numbers increase. 3. The mean fin surface Nusselt numbers has its maximum outside surface (Y$_{1}$) where there is no interference from each other fin. 4. The mean total Nusselt numbers in case of upward facing fins increase by 47% and 26%, respectively at H/S=0.67 and 1.67 than those in case of downward facing fins for Ra$_{s}$=6.50*10$^{3}$.>.

• 설비공학논문집
• /
• 제2권4호
• /
• pp.268-278
• /
• 1990

Hydrodynamic stability equations are formulated for natural convection flows adjacent to a heated or cooled, inclined, isothermal surface in pure water at $4^{\circ}C$, where the density variation with temperature becomes nonlinear. The resulting stability equations, when reduced to ordinary differential equations by a similarity transformation, constitute a two-point boundary-value problem, which was solved numerically. It is found from the obtained stability results that the neutral stability curves are systematically shifted to have lower critical Grashof numbers, as the inclination angle of upward-facing plate increases. Also, the nose of the neutral stability curve becomes blunter as the angle increases. It implies that the greater the inclination of the upward-facing plate, the more susceptible of the flow to instability for the wide range of disturbance wave number and frequency.

• 한국지반환경공학회 논문집
• /
• 제14권12호
• /
• pp.53-60
• /
• 2013

본 연구에서는 장기식생이 가능한 전면 식생형 보강토 옹벽의 식생 환경 적합성을 모니터링하고, 전면벽체 표면온도 측정을 통해 한여름철의 콘크리트 옹벽 전면벽체의 온도 변화를 평가하였다. 이를 위해 장기식생이 가능하도록 식생 포대를 삽입한 특수 블록 벽체를 시공하여 구절초, 맥문동을 포함한 20여 종의 종자 식재 후 2년간 식생 환경을 관찰하였을 뿐만 아니라, 실제 크기의 식생 옹벽을 건설하여 한여름철 식생 및 무식생 옹벽의 전면벽체 표면온도를 비교 분석하였다. 식생 환경 모니터링을 수행한 결과, 장기 식생이 가능한 블록 내에 식재된 대부분의 식물 생장 상태는 양호한 것으로 나타났으며, 식생 포대를 삽입한 블록 벽체가 식물의 성장에 적합한 환경을 제공하는 것으로 나타났다. 또한, 한여름철의 식생 옹벽과 무식생 옹벽의 콘크리트 블록 표면의 온도 변화량을 측정한 결과, 식생 옹벽에 비해 무식생 옹벽의 표면온도가 높게 나타났다. 식생 옹벽의 전면벽체의 경우, 무식생 옹벽의 전면벽체에 비해 표면온도 증가율이 작게 나타난 반면, 냉각율은 더 크게 나타나 장기식생이 가능한 전면 식생형 보강토 옹벽은 식생을 통해 열섬효과를 완화하는데 효과적으로 작용할 수 있을 것으로 판단된다.

• 설비공학논문집
• /
• 제4권3호
• /
• pp.217-232
• /
• 1992

A Numerical study on two-dimensional laminar natural convection with and without surface radiation in fully or partially open square cavity was performed. The cavity has one vertical heated wall facing a vertical opening and two horizontal insulated walls. The pressure boundary condition was applied to the opening instead of the velocity boundary condition. The results of this study showed that the increase of partition length decreased the convective and the radiative Nusselt numbers. It was also found that the increase of wall emissivity decreased the convective Nusselt numbers but increased the radiative Nusselt numbers.

• 설비공학논문집
• /
• 제8권4호
• /
• pp.527-536
• /
• 1996

Convective nucleate boiling and burnout heat flux have been studied on a flat, downward facing, constant heat flux surface cooled by an impinging water jet. The tests are progressed from low, nonboiling power to high, burnout heat flux power. The jet velocity and the subcooling do not affect the nucleate boiling curve of $q{\sim}{\Delta}T_{sat}$ diagram, but the supplementary water height affects the curve. For the case of dimensionless height of supplementary water S/D=1, the boiling curve shift to the heigher heat flux than that of S/D=0 or S/D=2. Burnout heat flux is enhanced with increasing jet velocity and subcooling. Also. by using the supplementary water(S/D=1 or S/D=2), burnout heat flux is larger than that of the simple water jet(S/D=0). A generalized correlation for the burnout heat flux data in the present boiling system with an impinging water jet is successfully evolved.

• 보존과학연구
• /
• 통권17호
• /
• pp.161-182
• /
• 1996

최근 환경 오염의 영향으로 문화재가 급속히 손상되고 있다. 이에 일본 동경국립문화재연구소에서는 1992년부터 일본 겸창시의 고덕원, 귀원원, 학강팔번궁, 도근현의 일어기신사, 내량시의 동대사 등에 환경 오염 관측 스테이션을 설치하여 조사하고 있다. 본고는 1996년 3월 일본 동경국립문화재연구소에서 발행된 보존과학 제35호에 실린 송전사랑, 청목번부씨의 “고덕원 국보 동조아미타여래좌상의 표면에 생성한 부식생성물의 해석”논문을 저자의 호의에 의해 번역하였다.

• 한국전산유체공학회지
• /
• 제6권2호
• /
• pp.1-8
• /
• 2001

Despite the massive effort which has been given to the analysis of the base flows, one commonly occurring case seems to be overlooked. This is for base (rearward facing surface) which is between a subsonic flow and supersonic flow. Potential flows of the air and gas streams are computed for the flow past a separated wake. Then a viscous jet mixing is superimposed on this inviscid solution. Conservation of mass, momentum and energy is achieved by multiple iterations. Despite the iterations, the wake flow field is computed with modest computer requirements.