• Journal of Biosystems Engineering
• /
• 제8권1호
• /
• pp.17-29
• /
• 1983

The milling process is considered as causing one of the greatest grain losses among all the processes in rice post-production. Major source of grain losses in the rice milling is considered as the whitening process. This study was attempted to develop an abrasive-type whitener, the whitening chamber of which being supplied by jet-air evenly and continuously. To investigate the milling performance by the new whitener, three kind of emery-stone grit(#36, #41, and #46), and three levels of rotational speed of emery stone roller (950, 1070, and 1200 rpm) were tested. The jet-air abrasive-type whitener was also compared with the conventional abrasive-type having no jet-air blower in terms of their milling performance. In addition, the effect of different combinations of sequential uses of the abrasive- and friction-type whiteners on the milling performance was also experimentally evaluated. The results of this study are summarized as follows; 1. In general, the whitening system combined with the abrasive type whitener with jet-air supply, which was newly designed, and the existing jet-air friction type whiteners produces more milled- and head-rice by about 0.3% points and 2.8% points, respectively than the system combined with the existing abrasive type without the jet-air supply under the same operational conditions. The former also consumed less electricity by 0.024 KwH per 100kg of milled rice production and gave more milling capacity by about 35 kg/hr. As compared with the conventional whitening system consisting of jet-air friction type whiteners only, the former yielded more milled- and head-rice by 1.5% points and 4.4% points, respectively. 2. The abrasive roller having 46 grit emery was better than the roller having 36 grit in aspects of milling performance and machine efficiency, in general. 3. With regard to the effect of combination method of abrasive type and friction type whiteners, one pass in abrasive type plus three passes in friction type gave better milling performance and energy efficiency than the two passes in abrasive type plus two passes in friction type regardless of the designs of the emery stone rollers. 4. The increase in rotational speed of the emery stone roller from 950 rpm to 1200 rpm presented negative effects on milled and head-rice yields and machine efficiency, but slightly positive effect on milling capacity.

• 대한조선학회논문집
• /
• 제61권1호
• /
• pp.51-60
• /
• 2024

Hi Air Korea and Hanwha ocean are currently developing an Onboard Carbon dioxide Capture System (OCCS) to absorb CO₂ emitted from ship's engine using a sodium hydroxide(NaOH) solution, and converting the resulting salt into a solid form through a chemical reaction with calcium oxide (CaO). The system process involves the following steps; 1)The reaction of CO₂ gas absorption in water, 2)The reaction between carbonic acid (H₂CO₃) and NaOH solution to produce carbonate or bicarbonate, and 3)The reaction between carbonate or bicarbonate and CaO to form calcium carbonate (CaCO₃). And ultimately, the solid material, CaCO₃, is separated and discharged using a separator. The OCCS has been installed on an ship and the test results have confirmed significant reduction effects of CO₂ in the ship's exhaust gas. A portion of the exhaust gas emitted from the engine was transferred to the OCCS using a blower. The flow rate of the transferred gas ranged from 800 to 1384 m³/hr, and the CO₂ concentration in the exhaust gas was 5.1 vol% for VLSFO, 3.7 vol% for LNG and a 12 wt% NaOH solution was used. The results showed a CO₂ capture efficiency of approximately 42.5 to 64.1 vol% and the CO₂ capture rate approximately 48.4 to 52.2kg/hr. Additionally, to assess the impact of the discharged CaCO₃on the marine ecosystem, we conducted "marine ecotoxicity test" and performed Computational Fluid Dynamics (CFD) analysis to evaluate the dispersion and dilution of the discharged effluent.

• 대한기계학회논문집B
• /
• 제34권4호
• /
• pp.383-390
• /
• 2010

본 연구에서는 폐열 회수를 위한 열전 발전 시스템을 구성하였다. 열전 모듈은 스테인레스 스틸덕트 내부에 부착되고, 뜨거운 공기를 불어넣는 장치가 덕트의 입구에 마주한 형태를 취하였다. 이 때 고온부의 온도가 균일한 상태에서 낼 수 있는 최대 파워를 구해내었다. 결과적으로 모듈에 가해지는 최적화된 압력이 있었다. 또한 열전 발전의 성능을 열전 모듈의 저온부의 열 싱크에 의하여 결정되었다. 자연대류 형식의 열 싱크에서 낼 수 있는 파워가 5배 가량 차이가 났다.

• 대한기계학회논문집B
• /
• 제27권12호
• /
• pp.1772-1780
• /
• 2003

An optimal soot blowing system has been developed for an optimal operation of power utility boilers by both minimization of the use of steam and the number of soot blowers worked during soot blowing. Traditionally, the soot blowing system has been operated manually by operators. However, it causes the reduction of power and thermal performance degradation because all soot blowers installed in the plant should be worked simultaneously even there are lots of tubes those are not contaminated by slagging or fouling. Heat transfer area is divided into four groups, furnace, convection area including superheater, reheater and economizer, and air preheater in the present study. The condition of cleanness of the tubes is calculated by several parameters obtained by sensors. Then, a part of soot blowers works automatically where boiler tubes are contaminated. This system has been applied in a practical power plant. Therefore, comparison has been done between this system and manual operation and the results are discussed.

• 한국화재소방학회논문지
• /
• 제26권5호
• /
• pp.61-66
• /
• 2012

고층 건축물의 화장실은 평상시 악취 등의 배출을 위하여 송풍기와 풍도로 구성된 배기시스템이 설치되어 있으며 용수의 공급이 이루어지고 있어서 화염과 연기에 대한 방호기능만 추가되면 화재발생시 긴급한 피난공간으로 활용될 수 있다. 평상시 화장실의 배기용으로 사용하는 송풍시스템을 화재시 급기시스템으로 전환함으로써 기존 화장실의 연기에 대한 방호성능을 확보하는 화장실 방연시스템을 제안하였다. 또한 지상 5층 규모의 연기제어 실험동에 기존 화장실을 이용한 피난공간의 방연시스템에 대한 실규모 실험 시설을 설치하고, 화재발생 조건에 따른 작동성능 평가 실험을 수행하였으며 그 결과를 제시하였다.

• 한국융합학회논문지
• /
• 제11권10호
• /
• pp.231-236
• /
• 2020

물 개질반응 고속선회 소각로 시험 설비를 제작하였다. 개질 반응실과 연소실은 직접 연결이 되게 하였다. 소각로와 집진 장치는 일체형으로 만들어 2중 격벽식 공기 냉각 구조로 만들었다. 송풍기를 집진장치 내부에 내장하여 공간적으로 효율성을 향상시켰다. 집진부의 옆에 부착된 다수의 집진통을 이용하여 분진을 수거하여 백필터가 별도로 필요없는 축류 유동형 다단식 집진장치를 적용하였다. 배출되는 가스 중 다이옥신을 측정한 결과 기준치 이하의 결과를 얻었다. 배출가스와 중금속을 측정한 결과 환경기준치 이하의 결과를 얻었다.

• 로봇학회논문지
• /
• 제15권2호
• /
• pp.115-123
• /
• 2020

Farmers using conventional sprayer system are exposed to pesticide poisoning and soil pollution due to pesticide application. In order to reduce this problem, the effective sprayer system is required. In this paper, we propose development of intelligent sprayer system using tree recognition. This intelligent sprayer system consists of an image recognition module, a remote control, a sprayer system, an air blower, and a control module. It is possible to spray pesticides automatically and manually through remote control using cameras and controls. We conducted a total of four experiments in tree recognition experiment, test of attachment and water sensitive papers, measurement of pesticide consumption, and measurement of worker exposure. The test results showed that the consumption of pesticides could be reduced while giving the same effect as conventional controls.

• 한국토양비료학회지
• /
• 제44권2호
• /
• pp.293-296
• /
• 2011

This survey was conducted to promote the environment-friendly use and recycling of livestock feces by obtaining information about the current state of livestock feces composts manufactured in Gyeonggi Province. Therefore, some aspects of quality and manufacturing techniques of livestock feces composts (LFCs) were examined especially in relation to the LFCs quality standard (LQS). By surveying the 70 composting plants in Gyeonggi Province, the total commercial production of LFCs in 2008 was estimated to be about $480,000Mg\;year^{-1}$ and they were manufactured mainly by using both mechanical mixer and bottom air blower. LFCs were composed mainly of chicken feces 29.2%, pig+chicken feces 23.1%, pig feces 20.0%, livestock feces+oil cake 12.3%, pig+chicken+cattle feces 10.8% and pig+cattle feces 4.6%. On the basis of the current official standard which was revised on March 2010, 11 composts out of surveyed 76 ones did not meet the LQS due to inadequate content of water (5), OM/N (1), NaCl (2) and Zn (3). The satisfaction rate to LQS by manufacturers was 100% in the composts produced by farmer's cooperative societies, 80.7% by civil factories, and 44.4% by farming guilds, respectively. The OM/N declined by adding chicken feces and oil cake, while Ca content was increased by the addition of chicken feces and NaCl was increased by adding cattle feces.

• 한국식품영양학회지
• /
• 제31권5호
• /
• pp.647-652
• /
• 2018

Extracts from bay leaves, Chongbaek (Allium fistulosum L.), Hutgae (Hovenia dulcis Thunb.) fruit, and green tea, using Soju (Korean alcohol, $30^{\circ}$) as a solvent were analyzed for their antioxidative properties. The eels were evenly coated with the extract concentration equivalent to 2% of their total weight and dried for 15 hours at $35^{\circ}C$ using an air blower. The DPPH radical scavenging effect, acid value and peroxide value of semi-dried eel, and linoleic acid peroxidation of eel oil were investigated. The highest level of DPPH radical scavenging was found in green tea extracts, followed by Hutgae fruit extract and bay leaves extract (p<0.05). The acid value and peroxide value of Hutgae fruit extracts coated eels refrigerated for 21 days were the lowest followed by the green tea extract coated eels. During the 20 days reaction period, all four kinds of extracts analyzed were found to effectively decrease linoleic acid peroxidation. Among them, Hutgae fruit and green tea extracts decreased the peroxide content of eel oil steadily and for a longer period when compared to other extracts. In conclusion, pre-application of Hutgae fruit and green tea extracts on eels before drying was found to be effective in delaying peroxidation in eels during the drying process and refrigeration.

• 전력전자학회논문지
• /
• 제9권4호
• /
• pp.381-389
• /
• 2004

본 논문에서는 입력단 커패시터를 제거한 인버터의 제어에 아날로그 적분기를 이용한 새로운 비선형 제어 기법인 순시보상형 PWM 제어회로를 적용하고 있다. 비선형 순시보상형 PWM 제어기는 순시 입력전압의 변동에 대한 보상과 제어기준값에 대한 추종이 스위칭 한 주기 내에서 이루어지는 다이나믹하고 강인한 응답성을 가지고 있으며, 아날로그 소자를 사용하고 있어 제어회로가 간단하면, 인버터 입력 맥동전압을 보상함으로 대형의 평활용 커패시터가 필요치 않아서 소형, 저가형으로 부피가 적은 인버터를 제작 할 수 있다는 장점을 가지고 있다. 이러한 장점을 가지고 있는 순시보상형 PWM 제어 인버터를 기존의 VVVF 제어형 전동기 인버터 시스템을 대치하여 저가이고 소형의 인버터 시스템으로 제안하고 실험을 통하여 우수한 동작특성을 확인하고 있다.