• 콘크리트학회논문집
• /
• 제12권4호
• /
• pp.41-48
• /
• 2000

This study is to investigate for the frost resistance of high-strength concrete using finely ground granulated blast-furnace slag with experimental parameters, such as water/binder ratio, replacement proportion of granulated blast-furnace slag, air content and methods of curing. The high-strength concrete using granulated blast-furnace slag is effective to resist frost and decrease scaling. The more increasable replacement proportion of granulated blast-furnace slag is, the better the effect is. The high-strength concrete using granulated blast-furnace slag needs hydrating adequately to prevent deterioration by drying in the early curing period. The micro structure of high-strength concrete, increased to the pore number with diameter of 0.03~0.1mm, is changed by using granulated blast-furnace slag, but is presented differently according to water/binder ration and replacement proportion of granulated blast-furnace slag.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2016년도 춘계 학술논문 발표대회
• /
• pp.38-39
• /
• 2016

In this research, the possibility of wasted refractory powder pulverized from refractory block as an expansive admixture and additional alkaline stimulant for class two and three blast furnace slag cements (BSC) was assessed with its high content of free CaO or free MgO. As the replacement ratios of wasted refractory powder and blast furnace slag were increased, flow and air content were decreased, while unit volume weight was increased under same conditions. Compressive strength of mortar was increased with increased replacement ratio of wasted refractory powder, especially, in the case of class three BSC, the highest compressive strength was obtained when wasted refractory powder was replaced 10 %.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2016년도 춘계 학술논문 발표대회
• /
• pp.139-140
• /
• 2016

In this research, the possibility of wasted refractory aggregate pulverized from refractory block as an expansive admixture and additional alkaline stimulant for class two and three blast furnace slag cements (BSC) was assessed with its high content of free CaO or free MgO. As the replacement ratios of wasted refractory powder and blast furnace slag were increased, flow and air content were decreased, while unit volume weight was increased under same conditions. Compressive strength of mortar was increased with increased replacement ratio of wasted refractory powder, especially, in the case of class three BSC, the highest compressive strength was obtained when wasted refractory aggregate was replaced 2%.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 춘계 학술논문 발표대회
• /
• pp.209-210
• /
• 2019

Current international concerns are the energy crisis due to climate change and depletion of fossil fuels due to global warming. Korea has a very high dependency on energy imports 93%. In Korea, 63% of the country is forested, and a power plant using wood biomass is being built in Korea. Biomass fly ash, a by-product of biomass energy generation, is now being discarded. There is little research to utilize discarded biomass fly ash. Therefore, this study aims to solve the environmental problems, develop new mixed materials, improve the quality and utilize the biomass fly ash, which is a by-product of the industrial waste. As a result of the experiment, the flowability decreased as the replacement ratio of biomass fly ash increased. As the replacement ratio of biomass fly ash decreased, the amount of air content.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 추계 학술발표회 논문집
• /
• pp.437-440
• /
• 2006

Generally, the strength of concrete depends on factors of materials, mix proportions, compaction, manufacturing methods and curing and so on. And recently, it has increased the using of crushed sand for concrete due to the exhaustion of good natural aggregate. This is an experimental study to compare and analyze the fluidity and compressive strength of ultra-high strength concrete according to the replacement ratio of crushed sand. For this purpose, the mix proportions of concrete according to the W/B ratio and replacement ratio of crushed sand was selected. And then air content, slump-flow, O-lot, compressive strength test were performed.

• 한국건설순환자원학회논문집
• /
• 제6권2호
• /
• pp.89-96
• /
• 2011

본 연구는 플라이 애시의 치환범위 상향에 따른 콘크리트의 제반 특성을 분석하여 추후 성능 향상을 위한 기초자료로 제공하기 위해 플라이 애시의 치환범위 0-40 % 및 양생 온도 $5-35^{\circ}C$에 따른 기초적 특성을 분석하였다. 그 결과 유동성은 FA의 증가에 따라 비례적으로 증가하였으나, 공기량은 감소하였다. 응결시간은 치환율 증가 및 저온일수록 지연되는 특성을 나타냈으며, 간이단열온도이력은 FA 치환율이 40 %까지 증가함에 따라 최고온도는 $8^{\circ}C$정도 낮아졌고, 최고온도 도달시간은 13시간 정도 지연되는 것을 알 수 있었다. FA 치환 상향에 따른 압축강도는 양생온도가 높을수록 플레인 대비 강도증진성이 향상됨을 알 수 있었다. 중성화의 경우는 FA 치환율이 증가할수록 깊이가 점차 커지는 것을 알 수 있어 중성화 대책에 대한 지속적인 연구가 필요할 것으로 판단되었다.

• 한국건설순환자원학회논문집
• /
• 제3권3호
• /
• pp.244-251
• /
• 2015

본 연구는 대경권 지역에서 생산되는 부순모래를 콘크리트용 잔골재로 활용하기 위하여 물리적 특성 및 부순모래의 조립률과 치환률이 콘크리트의 특성에 미치는 영향을 검토하였다. 실험결과 천연사의 조립률이 2.0정도이고, 부순모래 조립률이 3.2이상인 경우 천연사와 부순모래의 합성입도를 만족시키기 위한 부순모래의 치환률은 50% 이하가 적당한 것으로 나타났다. 부순모래를 사용한 콘크리트는 부순모래의 치환률이 증가할수록 슬럼프는 증가하는 것으로 나타났으나, 부순모래의 치환률 75% 이상에서는 현저한 워커빌리티 저하현상을 나타내었다. 또한 부순모래를 사용한 콘크리트의 공기량 및 블리딩은 부순모래 치환률이 증가할수록 감소하였으며, 콘크리트 압축강도는 부순모래 조립률에 관계없이 시멘트페이스트와 골재간의 부착력 증진에 기인하여 치환률이 증가할수록 증가하는 경향을 나타내었다.

• Journal of Chest Surgery
• /
• 제14권4호
• /
• pp.369-380
• /
• 1981

In this department 504 cases of valve replacement were done since 1968 to the end of October 1981. Since October 31, 1978 to the end of October 1981 ,333 Ionescu-Shiley bovine pericardial xenograft bioprosthetic cardiac valves were replaced in 265 patients. There were 149 males and 116 female. Ages ranged from 2 to 63 years with 25 cases under 15 years of age. Among 265 cases of Ionescu valve replacement there were 157 MVR, 36 VAR, 6 TVR, 45 MVR+ AVR, 16 MVR+TVR and 5 MVR+AVR+TVR cases with mortality of 5.7%, 8.3%, 16.7%, 8.9%, 18.8% and 20% for each group respectively. Over all mortality rate in 265 Ionescu valve replacement cases was 7.9% with 21 total deaths. Main causes of operative deaths were due to LCOS in 7, bleeding in 5, arrhythmia in 3, air embolism in 2,and heart block in 2 cases. There were 12 late complications with 6 deaths. Over all long-term survival rate was 89.8%. MVR showed the highest long-term survival rate with 92.4%, and MVR+AVR+TVR the lower with 80% lower with 80%.Average follow-up period was 14 month duration. Twenty five congenital anomaly cases were operated with Ionescu-valve replacement that consisted of 7 VSD+AI, and 5 Ebstein anomaly cases with over all operative mortality of 16% and late mortality of 14.3% among 21 operative survivors. There were 25 Ionescu valve replacement cases in pediatric patients under the age of 15 years, with 4 operative deaths. Fourteen MVR, 7 AVR, and 3 TVR cases were found. Even though long-term follow-up study was short in postoperative period with total of 33~.0 months among 244 operative survivors ranging one to 36 months, the late survivors showed beneficial long-term results two thromboembolic episodes in 244 patients were found. More cases and longer term follow-up study are warranted for valve replacement in pediatric and TVR cases with Ionescu-valves which have advantageous hemodynamic structures compared with other bio-prosthetic heart valves.

• 한국건설순환자원학회논문집
• /
• 제10권3호
• /
• pp.327-334
• /
• 2022

이 연구에서는 목재칩 열병합발전소 바닥재를 잔골재로 활용한 모르타르 및 콘크리트 특성을 평가하고자 부순 잔골재 대용으로서 목재칩 골재대체율과 물시멘트비에 따른 모르타르 특성과 목재칩 골재대체율에 따른 콘크리트의 특성을 비교 및 평가하였다. 목재칩 골재 대체율에 따른 시멘트 모르타르의 플로우는 목재칩 골재 대체율이 높아질수록 증가하는 경향을 보이고, 압축강도와 휨강도는 목재칩 골재 대체율이 높아질수록 증가하였다. 콘크리트의 슬럼프와 공기량은 골재 대체율이 높아질수록 증가하고, 콘크리트의 압축강도와 인장강도는 목재칩 골재 대체율이 증가할수록 높은 경향을 보였다. 이에, 열병합발전소로 인하여 발생하는 바닥재를 콘크리트용 잔골재로 활용하는 방안의 가능성을 확인하였다.

• 한국연소학회지
• /
• 제15권1호
• /
• pp.43-49
• /
• 2010

Co-combustion of syngas in an existing boiler can be one of the options for replacing conventional fossil fuel with alternative fuels such as waste and biomass. This study is aimed to investigate effects of syngas cocombustion on combustion characteristics and boiler efficiency. An experimental study was performed for a pilot-scale furnace with 4 oil burners. Tests were conducted with mixture-gas as a co-combustion fuel and heavy oil as a main fuel. The mixture-gas was composed of 15% CO, 7% $H_2$, 3% $CH_4$ and 75% $N_2$ for simulating syngas from air-blown gasification. And LHV of the mixture-gas was 890 kcal/$Nm^3$. Temperature distribution in the furnace and flue gas composition were measured for various heat replacement ratio by the mixture gas. Heat loss through the wall was also carried out through heat & mass balance calculation, in order to obtain informations related to boiler efficiency. Experimental results show that similar temperature distribution and flue gas composition can be obtained for the range of 0~20% heat replacement by syngas. NOx concentration is slightly decreased for higher heat replacement by the syngas because fuel NOx is decreased in the case. Meanwhile, heat loss is a bit decreased for higher heat replacement by the syngas, which implies that boiler efficiency can be a bit decreased when syngas co-combustion is applied to a boiler.