• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.1
• /
• pp.547-554
• /
• 2014

In this study, have researched 'a' index from three sound sources, effects on subject and finding optimal 'a' index, which can improve subject's stability, concentration and productivity. Check the health status of subjects who were selected 5 male and 5 female university students, and the period of this experiment was about two months. It were measured each subject's EEG, HRV and vibra image to analyze transition of stability, concentration, stress and heart beat. The results was measured in an environmental test room of temperature $25[^{\circ}C]$, the relative humidity 50 [%], illuminance 1,000 [lux] and air current speed 0.02[m/sec] with 'a' index of three sound sources which are a=1.106, a=1.749 and a=2.227. Results in a=1.106 compared to before exposure, relative $S{\alpha}$ wave, relative $L{\beta}$ wave and relative $M{\beta}$ wave have been revitalized, asymmetry index, stress and HRV have been decreased. Thus, to increase stability, concentration and productivity, also to decrease stress, changes in sound source of a=1.106 was found to be the most effective.

• Resources Recycling
• /
• v.28 no.6
• /
• pp.96-105
• /
• 2019

Automobile shredder residue (ASR) is the final waste produced when end-of-life vehicles (ELVs) are shredded. ASR can be separated using mineral-processing operations such as comminution, air classification, magnetic separation, and/or electrostatic separation. In this work, trajectory analyses of conductors (copper) and non-conductors (glass) in the ASR have been carried out using induction electrostatic separator for predicting or improving the ASR-separation efficiency. From results of trajectory analysis for conductors, the trajectories of copper wire by observation versus simulation for coarse particles of 0.5 and 0.25 mm showed consistent congruity. The observed 0.06 mm fine-particles trajectory was deflected toward the (-) attractive electrode owing to the charge-density effects due to the particle characteristics and relative humidity. In the case of non-conductors, the actual trajectory of dielectric glass deflected toward the (-) electrode, showing characteristics similar to those of conductive particles. The analyses of stereoscopic microscope and SEM & EDS found heterologous materials (fine ferrous particles and conductive organics) on the glass surface. This demonstrates the glass decreasing separation efficiency for non-ferrous metals during electrostatic separation for the recycling of ASR. Future work will require a pretreatment process for eliminating impurities from the glass and advanced trajectory-simulation processes.

• KIPS Transactions on Computer and Communication Systems
• /
• v.6 no.11
• /
• pp.437-444
• /
• 2017

Electric Pole is a supporting beam used for power transmission/distribution which is sensitive to external force change of environmental factors. Therefore, power facilities have many difficulties in terms of maintenance/conservation from external environmental changes and natural disasters that cause a great economic impact. The aerial wire cause elasticity due to the influence of temperature, or factors such as wind speed and wind direction, that weakens the electric pole. The situation may lead to many safety risk in day-to-day life. But, the safety assessment of the pole is carried out at the design stage, and aftermath is not considered. For the safety and maintenance purposes, it is very important to analyze the influence of weather factors on external forces periodically. In this paper, we analyze the acceleration data of the sensor nodes installed in electric pole for maintenance/safety purpose and use Kalman filter as noise compensation method. Fast Fourier Transform (FFT) is performed to analyze the influence of each meteorological factor, along with the meteorological factors on frequency components. The result of the analysis shows that the temperature, humidity, solar radiation, hour of daylight, air pressure, wind direction and wind speed were influential factors. In this paper, the influences of meteorological factors on frequency components are different, and it is thought that it can be an important factor in achieving the purpose of safety and maintenance.

• Journal of Korea Water Resources Association
• /
• v.50 no.1
• /
• pp.37-53
• /
• 2017

Pan evaporation has been used as an indirect method for the estimation of reservoir evaporation. Therefore, in this study, pan evaporation estimation equations using only temperature data were suggested in the case that available meteorological data is limited. A formula for estimating the pan evaporation were suggested by comparing estimated pan evaporation with measured pan evaporation in 12 study areas in Korea. The suggested pan evaporation equations were verified in 44 study areas by comparing not only with temperature-based equations but also with equations using other meteorological data (temperature, wind speed, relative humidity, and sunshine duration). The study results indicate that the suggested equations in this study provide much better pan evaporation estimates, compared with other temperature-based equations. Overall, the suggested equations provide appropriate pan evaporation estimates in most of 56 study areas. Therefore, the suggested equations using only temperature data in this study are considered appropriate for the estimation of pan evaporation in Korea especially in the case that available meteorological data is limited. In the future, using the air temperature and pan evaporation data measured at the reservoir, further research is needed to examine the applicability of suggested equations for the estimation of reservoir evaporation.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.26 no.2
• /
• pp.95-103
• /
• 2018

As a guideline for desulfurization and dehumidification pretreatment facility for optimizing utilization of biogas, the $H_2S$ concentration is set at 150 % which can be treated with iron salts, dehumidification is the optimum value for generator operation, and the relative humidity applied at the utilization of biogas in EU is set at 60 %. We have set up the generator facility guidelines to optimize utilization of biogas. The appropriate amount of biogas should be at least 90 % of the total gas generation, and the capacity of generator facility should be set at 20~30 %. In order to equalize the pressure of the incoming gas the generator, a gas equalization tank should be installed and the generator room average temperature should be kept at $45^{\circ}C$ or less. Since the gas is not produced at a certain methane concentration in the digester, the efficiency is lowered. Therefore, it is required to install an air fuel ratio control system according to the change in methane concentration. Therefore, it is necessary to compensate for the disadvantages of biogasification facilities of organic waste resources and optimize utilization of biogas and improve operation of facilities. This study was conducted to optimize biogas utilization of type of organic waste(containing sewage sludge and food waste, animal manure), investigate the facilities problem and propose design, operation guidelines such as pre-treatment facilities and generators.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.44 no.1
• /
• pp.93-106
• /
• 2016

This study aimed to estimate and evaluate the thermal mitigation of the urban tree canopy on the summer outdoor environment by quantitative use of mean radiant temperature. This study applied the SOLWEIG model based $T_{mrt}$ comparison method by using both (1) urban tree canopy presence examples and (2) urban tree canopy absence examples as constructed from airborne LiDAR system based three-dimensional point cloud data. As a result, it was found that an urban tree canopy can provide a decrease in the entire domain averaged daily mean $T_{mrt}$ about $5^{\circ}C$ and that the difference can increase up to $33^{\circ}C$ depending both on sun position and site conditions. These results will enhance urban microclimate studies such as indices (e.g., wind speed, humidity, air temperature) and biometeorology (e.g., perceived temperature) and will be used to support forest based public green policy development.

• Journal of Bio-Environment Control
• /
• v.18 no.4
• /
• pp.326-331
• /
• 2009

This study was carried out to evaluate the effects of row cover materials supported by flexible FRP frames with three kinds of non-woven fabric, and five kinds of net in leaf vegetable cultivation. Leaf radish (Raphanus sativus L.), Chinese cabbage (Brassica rapa L. ssp. pekinensis) were sown on May 21, 2003, and leaf lettuce (Lactuca sativa L.) was planted at the same date in Agricultural Research Center for Climate Change, Jeju, Korea. Net coverings showed higher light transmittance than in non-woven fabric coverings. The average air and soil temperatures increased by $0.3{\sim}1.0^{\circ}C$ in net coverings and $0.5{\sim}3.0^{\circ}C$ in non-woven fabric coverings, respectively. There was no difference in relative humidity among the covering materials. All the vegetables showed higher growths and yields in non-woven coverings than in non-covering. The yields increased 81% in leaf lettuce, 58% in leaf radish, and 93% in Chinese cabbage, respectively. In addition, the insect damages were considerably reduced in the row covering plots than in the control, especially in non-woven fabric coverings.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.6
• /
• pp.643-648
• /
• 2010

Portable fuel cells are commonly operated in the dead-end mode because of such as high fuel utilization. However, the performance of such systems deteriorates continuously with an increase in the amount of by-products such as water vapor and nitrogen. In this study, to verify the effect of water vapor on Proton Exchange Membrane Fuel Cells (PEMFCs), constant-load experiments were carried out for a current density of 600 mA/cm2 and a voltage of 0.4 V, respectively. The performance of the cell was more stable under constant voltage conditions than under constant current density conditions. Condensed water accumulated in the anode channel near the cell outlet. The experimental results show how the relative humidity (RH = 0.15, 0.4 and 0.75) of air at the cathode side affect the performance of PEMFCs with dead-end anode. At RH values higher than 0.15, the mean power density increased by up to 51% and the mean purge duration decreased by up to 25% compared to the corresponding initial values.

• Journal of Preventive Medicine and Public Health
• /
• v.38 no.3
• /
• pp.283-290
• /
• 2005

Objectives : The aim of this paper was to examine the relationship between the summertime (June to August) heat index, which quantifies the bioclimatic apparent temperature in sultry weather, and the daily disease-related mortality in Seoul for the period from 1991 to 2000. Methods : The daily maximum (or minimum) summertime heat indices, which show synergetic apparent temperatures, were calculated from the six hourly temperatures and real time humidity data for Seoul from 1991 to 2000. The disease-related daily mortality was extracted with respect to types of disease, age and sex, etc. and compared with the time series of the daily heat indices. Results : The summertime mortality in 1994 exceeded the normal by 626 persons. Specifically, blood circulation-related and cancer-related mortalities increased in 1994 by 29.7% (224 persons) and 15.4% (107 persons), respectively, compared with those in 1993. Elderly persons, those above 65 years, were shown to be highly susceptible to strong heat waves, whereas the other age and sex-based groups showed no significant difference in mortality. In particular, a heat wave episode on the 22nd of July 2004 ($>45^{\circ}C$ daily heat index) resulted in double the normal number of mortalities after a lag time of 3 days. Specifically, blood circulation-related mortalities, such as cerebral infraction, were predominant causes. Overall, a critical mortality threshold was reached when the heat index exceeded approximately $37^{\circ}C$, which corresponds to human body temperature. A linear regression model based on the heat indices above $37^{\circ}C$, with a 3 day lag time, accounted for 63% of the abnormally increased mortality (${\geq}+2$ standard deviations). Conclusions : This study revealed that elderly persons, those over 65 years old, are more vulnerable to mortality due to abnormal heat waves in Seoul, Korea. When the daily maximum heat index exceeds approximately $37^{\circ}C$, blood circulation-related mortality significantly increases. A linear regression model, with respect to lag-time, showed that the heat index based on a human model is a more dependable indicator for the prediction of hot weather-related mortality than the ambient air temperature.

• Journal of the Korean Geographical Society
• /
• v.37 no.4
• /
• pp.385-402
• /
• 2002

This study examined temporal and spatial patterns of bioclimatic perceived sultriness in South Korea by analyzing the climatology of heat index calculated from ambient temperature and relative humidity for the period of 26 years (1973-1998). As results, spatially, bioclimatic sultriness above all thresholds frequently occurred mainly in the central western inner area, the southwestern inner area, and the southeastern inner area of South Korea. Especially, Miryang in the southeastern inner area of South Korea was proved to be, bioclimatically, the sultriest area in South Korea that has recorded frequent high heat index. Temporally, frequency of sultriness in the contiguous South Korea significantly increased in the 1990s. Specifically, In 1994, frequencies of heat index exceeding each threshold was the highest all over South Korea. Normally, the sultriness with high heat index exceeding 40.6$^{circ}C$ occurred mainly for the period of between the end of July generally after Summer Changma and the beginning of August before another small rainy season of years. These temporal-spatial distributions of bioclimatic sultriness in South Korea showed various patterns regionally, affected by physical and anthropogenic climatic factors such as topography, latitude, altitude, water bodies or aforestration, urbanization, and industrialization as well as movements of large-scale air masses.