• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.6 no.1_2
• /
• pp.76-80
• /
• 1973

Cyclina sinensis is an edible bivalve inhabiting wide tidal flats which are exposed to the air at ebb tide along the western coast of Korea. Over the period of June to September 1971, some specimens from a tidal flat near Inchon were submerged in sea water with various concentrations of ammonium hydroxide added and careful observations were made on their fertilization, early development, and metamorphosis of the larvae. The highest rate of fertilization was demonstrated by individuals treated with 1/1000 normal solution of ammonium hydroxide and their fertilized eggs followed normal development, i.e., two cell stage 1.5 hours after fertilization, blastular stage after 4 hours, and trochophore stage after 6 hours. Within 24 hrs after fertilization C. sinensis larvae have acquired the form of early straight-hinge veliger with the mean prodissoconch I with the length of $110\mu$. It takes seven days to get the umbo stage with the mean shell length of $190\mu$ and twenty days to get the morphosing stage with the mean shell length of $260\mu$. The larvae were cultured to the metamorphosing stage with the shell length of $270\mu$ in the laboratory condition.

• The Journal of Korean Academy of Prosthodontics
• /
• v.45 no.5
• /
• pp.601-610
• /
• 2007

Statement of problem: The adhesion between titanium and ceramic is less optimal than conventional metal-ceramic bonding, due to reaction layer form on cast titanium surface during porcelain firing. Purpose: This study characterized the effect of titanium-ceramic adhesion after gold and TiN coating on cast and wrought titanium substrates. Material and method: Six groups of ASTM grade II commercially pure titanium and cast titanium specimens$(13mm{\times}13mm{\times}1mm)$ were prepared(n=8). The conventional Au-Pd-In alloy served as the control. All specimens were sandblasted with $110{\mu}m\;Al_2O_3$ particles and ultrasonically cleaned for 5min in deionized water and dried in air before porcelain firing. An ultra-low-fusing dental porcelain (Vita Titankeramik) was fused on titanium surfaces. Porcelain was debonded by a biaxial flexure test at a cross head speed of 0.25mm/min. The excellent titanium-ceramic adherence was exhibited by the presence of a dentin porcelain layer on the specimen surface after the biaxial flexure test. Area fraction of adherent porcelain (AFAP) was determined by SEM/EDS. Numerical results were statistically analyzed by one-way ANOVA and Student-Newman-Keuls test at ${\alpha}=0.05$. Results: The AFAP value of cast titanium was greatest in the group 2 with TiN coating, followed by group 1 with Au coating and the group 3 with $Al_2O_3$ sandblasting. Significant statistical difference was found between the group 1, 2 and the group 3 (p<.05). The AFAP value of wrought titanium was greatest in the group 5 with TiN coating, followed by the group 4 with Au coating and the group 6 with $Al_2O_3$ sandblasting. Conclusion: No significant difference was observed among the three groups (p>.05). The AFAP values of the cast titanium and the wrought titanium were similar. However the group treated with $Al_2O_3$ sandblasting showed significantly lower value (p<.05).

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.20 no.1
• /
• pp.96-103
• /
• 2014

A liquefied natural gas(LNG) in cryogenic liquid is converted back into gaseous form for distribution to residential and industrial consumers. In this re-gasification process, LNG supplies a plenty of cold thermal energy about $83.7{\times}10^4kJ/kg$. The LNG cold thermal energy is utilized for the re-liquefaction process of cryogenic fluids such as Nitrogen, Hydrogen and Helium, and ice manufacturing process and air-conditioning system in some advanced countries. Therefore, it is also necessary to establish the recovery systems of the LNG cold thermal energy around Incheon, Pyungtaek and Tongyung LNG import terminals in our country. Methane is used as working fluid in this paper, which is the major component of LNG over 85 % by volume, in order to investigate the flow behavior characteristics of LNG with phase change at low heat flux. This paper presents the effects of pipe diameters, pipe inclinations and saturation pressures on the flow boundaries of methane flowing in a cryogenic heat exchanger tube, together with those of nitrogen, propane, R11 and R134a. The outcomes obtained from this theoretical researches are also compared with previous experimental data. It was also found that the effect of pipe inclination on the methane flow boundaries was significant.

• The Journal of Natural Sciences
• /
• v.8 no.2
• /
• pp.137-146
• /
• 1996

To increase the oxidation-resistance of graphite substrate, we have tried to form SiC film on its surface by Sol-Gel method. TEOS(Tetraethyl orthosilicate) and phenol resin have been used as silicon(Si) and carbon(C) sources, respectively. In order to know the effect of the TEOS Sol concentration on the forming of SiC film, we have taken 5 different $H_2O$/TEOS mol ratios of 2, 4, 6, 8 and 10. And the coating states of SiC on the graphite substrate have been analyzed with X-ray diffractometer and scanning electron microscope (SEM), and we have obtained about 5${\mu}m$, 12${\mu}m$, 7${\mu}m$, 7${\mu}m$ and 2 ${\mu}m$ as the thickness of SiC coating layers, respectively. For also knowing the oxidation resistance the SiC coated graphites at $1600^{\circ}C$ were heated again at $1000^{\circ}C$ under air atmosphere for 1 hr, and as a result we have received the weight losses of 26.17%, 20.97%, 17.28%, 21.73% and 28.13%, respectively.

• Korean Journal of Materials Research
• /
• v.9 no.10
• /
• pp.1025-1031
• /
• 1999

Alloys of TiAl with six different compositions. i. e., Ti-(42, 44)Al-2Nb-4V. Ti-(42, 44)Al-4Nb-2V and Ti -(42, 44)Al-4Nb-2Cr, were manufactured by arc-melting. and their oxidation behavior was studied. Both isothermal and cyclic oxidation tests were performed at 700, 800 and $900^{\circ}C$ in air for 50hr. The oxidation resistance increased in the order of Ti-(42, 44)Al-2Nb-4V, Ti-(42, 44)Al-4Nb-ZV and Ti-(42, 44)Al-4Nb-2Cr. It was found that V was a deleterious element, while Cr was a beneficial element in terms of oxidation resistance. During oxidation, a simultaneous interdiffusion was observed. All the constituent elements in the base alloys diffused outward. whereas oxygen from the atmosphere diffused inward, to form triple oxide layers composed of an outermost $\textrm{TiO}_2$ layer. upper ($\textrm{TiO}_2+\textrm{Al}_2\textrm{O}_3$) mixed layer, and lower $\textrm{TiO}_2$-rich layer.

• Korean Journal of Veterinary Research
• /
• v.26 no.2
• /
• pp.283-292
• /
• 1986

Isolation and identification of Mycoplasma were performed to clarify Mycoplasma infection of mice fed by conventional feeding at two ($K_1$, $K_2$) institutes in Korea. The twenty mice to be tested were randomly sampled from each of 10 breeding colonies in respective institute. Identification of the Mycoplasma strains isolated from the nasal cavity, lung and synovia of mice was made according to the morphology of colonies, biological and biochemical properties with special reference to M. pulmonis, M. arthrotodis and M. neurolyticum. In addition, growth inhibition test was performed using hyperimmune rabbit antisera to the strain PG-22 of M. pulmonis, the strain PG-6 of M, arthritidis and the strain PG-28 of M. neurolyticum and also differentiation of isolates from L-form bacteria was dont by Dieses staining and culture method with passage of the isolates on liquid media eliminated antibacterial drug. On the other hand, a total of 13 strains out of the 44 isolated M. pulmonis from mice was investigated for their susceptibility against 16 antibiotics in vitro. The antibiotic sensitivity test was made using $3{\times}10^4$ organisms/0.3ml on each plate(90mm diameter) with antibiotic mono-or tri-disk. The results obtained are summarized as follows: 1. Out of 20 mice from 10 breeding colonies in Kl institute, mycoplasma-like strains from the nasal cavity of 16 mice(80%) and from the lung of 8 mice(40%) were isolated, while out of 20 mice in K2 institute, M-like strains were isolated from the nasal cavity of 14 mice(70%) and from the lung of 6 mice(30%). However, no mycoplasma-like organisms were isolated from the synovia of the 40 mice examined. All the 44 strains isolated were identified as the organisms of M. pulmonis. 2. Out of the 16 antibiotics tested, penicillin, oleandomycin and bacitracin showed no activity against all the 13 M. pulmonis strains. On the contrary, lincomycin, clindamycin, chloramphenicol, tetracycline, minocycline, kanamycin, gentamycin and tobramycin showed high activity with three different antibiotic concentration of tridisk, but amikasin and spiramycin showed intermediate activity. Other antibiotics such as polymyxin B and colistin showed low activity, while erythromycin showed lower activity than others.

• Korean Journal of Food Science and Technology
• /
• v.29 no.5
• /
• pp.963-968
• /
• 1997

Cereals and legumes were ground, blended and extruded with a twin-screw extruder to form a reconstituted grain. The basic formula was as follows: brown rice 30%, barley 30%, wheat 20%, millet 5%, sorghum 5%, soybean 7%, and red bean 3%. Extrusion conditions were properly set for feed moisture content of $24{\sim}30%$, barrel temperature of $50{\sim}60^{\circ}C$, and screw speed at 250 rpm. The extruded grain was air-dried and evaluated for quality characteristics, compared with milled rice. Size and shape of the reconstituted grain were similar to short-grain milled rice. Stacking volume of the reconstituted grain was a little higher than that of milled rice, and its water absorption was more rapid. From the texture measurements, hardness of cooked reconstituted grain was slightly lower and adhesiveness was appeared to be higher.

• Journal of Conservation Science
• /
• v.32 no.4
• /
• pp.491-500
• /
• 2016

Fog is atmospheric in which tiny drops of water vapor are suspended in the air near the ground. Its form, occurrence, etc., change according to the temperature, relative humidity, wind and geographical features of the space around it. In particular, fog tends to occur near a source of water because of temperature and relative humidity difference. These days, climate change is increasingly affecting the occurrence of fog. Therefore the purpose of this study was to investigate how fog affects materials that are part of our cultural properties through outdoor exposure tests and artificial degradation. The degradation evaluation of materials as a function of fog occurrence frequency, showed that the color of metals changed noticeably, whereas dyed silk and Dancheong showed degradation on the surface and color differences but no particular tendencies. Therefore, damage prediction by color differences as a function of fog occurrence frequency was based on metal samples, which showed constant color differences. Through a comparison of the predictive value and color difference by outdoor exposure, the accuracy and applicability of the damage prediction formula was confirmed. If a more complex damage prediction formula is created, it is expected that prediction of the degree of material damage in the field would be possible.

• Korean Journal of Food Science and Technology
• /
• v.37 no.1
• /
• pp.11-14
• /
• 2005

White radish was minimally processed, packed with air, $CO_{2}$ (100%), and $CO_{2}/N_{2}$ (25/75%), and irradiated at 0, 1, and 2 kGy, and its microbiological quality and pH were investigated during storage for 2 weeks at $4^{\circ}C$. Irradiation significantly reduced total aerobic, coli-form, and lactic acid bacteria counts. Modified atmosphere packaging (MAP) enhanced microorganism control during storage. Acidity decreased by MAP but was restored during storage, Irradiation did not affect sample pH. Results show irradiation at 2 kGy combined with MAP can enhance microbiological safety and quality of minimally processed radish.

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.2
• /
• pp.321-325
• /
• 2020

The purpose of this study is to re-concept the future battle of the Army, which combines the effects of advanced technology on the concept of combat and the AICBM technology. The "war concept" changes with the times, and can be seen through the following two examples. First, it is a concept that achieves relative superiority by analyzing enemies. A case in point is the U.S. military's development of a "public joint battle" into a "multi-domain operation." Second, it is 'science and technology' that leads to a change in the concept of combat. A case in point is that the firepower warfare on land and sea in World War I developed from World War II to "air warfare" due to the emergence of aircraft. In this regard, the U.S. military is focusing on the concept of fighting in line with the future operational environment based on high-tech science and technology and the construction of the future military through the creation of the "Future Command." Therefore, our military needs to utilize the major technologies of the fourth industrial revolution as an opportunity to develop the concept of future combat, and the future war will greatly affect the development of the concept of advanced science and technology carrying out war, as AIC technology based on the fourth industrial revolution will promote innovation in defense operations in the form of super-connected, super-intelligence and super-integration. Therefore, this study will present the impact of advanced technology on the concept of combat and the concept of battle of the future Army incorporating the technology of AICBM.