• Journal of the Korean Society of Propulsion Engineers
• /
• v.18 no.1
• /
• pp.1-7
• /
• 2014

In this study, the effect of velocity ratio and particle size on the flow mixing characteristics in the secondary combustor was investigated. Both PIV(Particle Image Velocimetry) technique and LES(Large Eddy Simulation) were applied. Two sizes of Polystyrene PIV seeding particle of 5 and $50{\mu}m$, and three velocity ratios of 5, 3, and 1.5 were considered. Results showed that the mixing of two air streams created reattachment and recirculation regions. The size of the recirculation region was decreased as the velocity ratio increased. For the larger particle cases, due to the increased momentum by the larger particles, the size of the recirculating regions were larger than that of the smaller particle cases and the effect of the velocity ratio was not as significant as in the smaller particle case.

• Clean Technology
• /
• v.22 no.3
• /
• pp.190-195
• /
• 2016

The thermal decomposition of waste energetic materials such as TNT, RDX and composition B in a commercial rotary kiln has previously been carried out. As part of the demilitarization process, the thermal decomposition of homogeneous double base propellant (DB) used in M8 and consisting predominantly of nitrocellulose and nitroglycerine is examined with respect to a number of operating conditions. A single condensed phase reaction with 4 species and 365 gas phase reactions and 59 species are considered. Simulation results show the sensitivity of the thermal decomposition of DB with temperature and velocity. At relatively low velocity with constant inlet hot air temperature, temperature in the rotary kiln was found to be highest, 953 K and 1300 K for cases 3 and 6 respectively. Illustrating that optimum operating temperature can be achieved by controlling the inlet velocity without additional cooling systems.

• Strategy21
• /
• s.33
• /
• pp.5-36
• /
• 2014

This article aims to analyze the diplomatic challenges currently facing China as well as the foreign policy the Xi Jinping administration is adopting to address them. With these purposes in mind, it will look into three areas: first, diplomatic tasks confronting the Xi leadership; second, foreign policy that the Xi administration has implemented since the 18th Party Congress in 2012; and third, the prospects for China's foreign policy under the Xi leadership. As the Xi Jinping administration entered into office, it has encountered two major diplomatic challenges. One is the searching for a new foreign policy, and the other the restructuring of the existing foreign affairs and national security systems. The Xi administration, during its first year in office, has responded actively to tackle these issues. To begin with, it has attempted to make some adjustments on foreign policy while maintaining the Deng Xiaoping line of foreign policy. One of these modifications is placing emphasis on national "core interest," as illustrated by changes in guideline for maritime conflicts, pushing for building maritime power, and proclamation of Air Defense Identification Zone in the East China Sea. Second is the decision on the new guideline for peripheral diplomacy. That is, the administration regarded creating peaceful and stable environments to realize "Chinese Dream" as an important goal of foreign policy, and proposed such new guiding ideology as "familiarity, integrity, benefit, and accommodation." In additoin, the Xi administration restructured the existing foreign affairs and national security systems. Establishing the Central State Security Committee and the Internet Leading Small Group (LSG) are cases in point. As comprehensive organizations for policy coordination that encompass party, government, and military, the two LSGs are in charge of enacting related policies and fine-tuning policy implementation, based upon leadership consisting of chiefs of each relevant organs. Moreover, since Xi himself became the chief of these two newly-found organs, the conditions under which these LSGs could demonstrate unified leadership and adjusting role in its implementation of military, diplomatic, and security policies were developed. The future Chinese diplomacy will be characterized with three main trends. First, peripheral diplomacy will be reinforced. The peripheral diplomacy has become far more important since the Work Conference on Peripheral Diplomacy in October 2013. Second, economic diplomacy will be strengthened with an eye on reducing the "China Threat Theory," which still exists in Asia. Third, the policies to isolate the Philippines and Japan will continue in regard to maritime disputes. All in all, Chinese diplomacy in the Xi Jinping era is likely to feature practical diplomacy which combines both hard and soft approaches to best realize Chinese national interest.

• Applied Chemistry for Engineering
• /
• v.10 no.1
• /
• pp.58-66
• /
• 1999

The catalytic oxidation of vinyl chloride was investigated over $CrO_x$ impregnated on $Al_2O_3$ at temperature between 200 and $400^{\circ}C$. The major carbonaceous products were CO and $CO_2$, and the selectivity of $CO_2$ was gradually increased with increasing reaction temperature, while that of CO was dropped consequently. This suggests that CO is the first product which is further oxidized to $CO_2$ in the oxidation of vinyl chloride over $CrO_x/Al_2O_3$. The addition of HCl in the feed didn't affect the conversion of vinyl chloride, but the selectivity of $CO_2$ decreased by adding HCl. It implies that HCl inhibits, the complete oxidation of vinyl chloride to $CO_2$. When oxidizing vinyl chloride in dry air, significant amounts of $Cl_2$ were observed, while no $Cl_2$ was detected in the humid condition. The activities of several catalysts including various precious metals and other transition metal oxides were measured, it was found that the catalytic activity of 12% $CrO_x/Al_2O_3$ was higher than other catalysts except 1% $Pt/Al_2O_3$. The reaction rate of 12% $CrO_x/Al_2O_3$ was 1.2 times lower than that of 1% Pt/alumina, but it was 3 to 8 times more active than other catalysts for vinyl chloride oxidation at $275^{\circ}C$.

• Journal of Satellite, Information and Communications
• /
• v.3 no.1
• /
• pp.41-47
• /
• 2008

Line-of-sight communications cannot easily support korean armed forces because of mountainous terrain. ADD(Agency for Defense Development) introduced ANASIS(Army Navy Air-force Satellite Information System) to meet the Korean warfighter's operational needs. Currently, army's military satcom terminal is designed for either fixed site or on-the-pause operation. The US army is under development of multi-band integrated on-the-move satellite terminals to let the army's communication capability to keep pace with globally deployable Joint Task Force for network-centric application. In this paper we analyzed X-band and Ka-band link and subsystem requirement. Our focus here is to describe key technical issues. Especially, On the basis of 3dB beam width of 0.9m antenna, Tracking accuracy and disturbances compensation signal processing on-the-move of Antenna Tracking system is analyzed. Also, protocol is analyzed that minimize blockage on the move due to an obstacle. when the received signal blocked, it stop to transmit burst signal and retransmit when blockage removed through received synchronization signal monitoring. Analyzed specification will be used to make prototype terminal to analyze risk for mass production

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.8
• /
• pp.248-255
• /
• 2020

The effects of the coating thickness on the thermal durability and thermal stability of thermal barrier coatings (TBCs) with a gradient coating thickness were investigated using a flame thermal fatigue (FTF) test and thermal shock (TS) test. The bond and topcoats were deposited on the Ni-based super-alloy (GTD-111) using an air plasma spray (APS) method with Ni-Cr based MCrAlY feedstock powder and yttria-stabilized zirconia (YSZ), respectively. After the FTF test at 1100 ℃ for 1429 cycles, the bond coat was oxidized partially and the thermally grown oxide (TGO) layer was observed at the interface between the topcoat and bond coat. On the other hand, the interface microstructure of each part in the TBC specimen showed a good condition without cracking or delamination. As a result of the TS test at 1100 ℃, the TBC with gradient coating thickness was initially delaminated at a thin part of the coating layer after 37 cycles, and the TBC was delaminated by more than 50% after 98 cycles. The TBCs of the thin part showed more oxidation of the bond coat with the delamination of topcoat than the thick part. The thick part of the TBC thickness showed good thermal stability and oxidation resistance of the bond coat due to the increased thermal barrier effect.

• Journal of the Korea Society for Simulation
• /
• v.27 no.2
• /
• pp.35-48
• /
• 2018

The study of air defense against North Korean tactical ballistic missiles (TBM) should consider the rapidly changing battlefield environment. The study for target re-designation for intercept missiles enables effective operation of friendly defensive assets as well as responses to dynamic battlefield. The researches that have been conducted so far do not represent real-time dynamic battlefield situation because the hit probability for the TBM, which plays an important role in the decision making process, is fixed. Therefore, this study proposes a target re-designation algorithm that makes decision based on hit probability which considers real-time field environment. The proposed method contains a trajectory prediction model that predicts the expected trajectory of the TBM from the current position and velocity information by using random forest and moving window. The predicted hit probability can be calculated through the trajectory prediction model and the simulator of the intercept missile, and the calculated hit probability becomes the decision criterion of the target re-designation algorithm for the missile. In the experiment, the validity of the methodology used in the TBM trajectory prediction model was verified and the superiority of using the hit probability through the proposed model in the target re-designation decision making process was validated.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.6
• /
• pp.765-771
• /
• 2019

With the increase in the speed of ships and the size of ocean structures, the importance of flow noise has become increasingly critical in meeting regulatory standards. However, unlike active investigations in aeroacoustics fields for airplanes and trains, which are based on acoustic analogy methods for tonal and broadband frequency noise, only the discrete blade passing frequency noise from propellers is considered in marine fields. In this study, prediction methods for broadband noise in marine propellers and underwater appendages are investigated using FW-H Formulation1B, which can consider the mechanism of primary noise generation of trailing edge noise. The original FW-H Formulation 1B is based on the pressure correlation function tolackitsgeneralityandaccuracy. To overcome these limitations, wall-pressure spectrum models are adopted to improve the generality in fluid mediums. The comparison of the experimental results obtained in air reveals that the proposed model exhibits a higher accuracy within 5 dB. Furthermore, the prediction procedures for broadband noise for hydrofoils are established, and the estimation of broadband noise is conducted based on the results of the computational fluid dynamics.

• Survey Research
• /
• v.7 no.1
• /
• pp.29-53
• /
• 2006

This paper analyzes which of the military sub-fields has an effect on a soldier's evaluation of South and North Korean military power. There are three objectives of this paper. First, it is to analyze whether the South is superior to the North in the overall military power and military sub -fields, without the presence of the US armed forces in South Korea. Second, it is to assess which of the military sub-fields influences the overall evaluation of military power through a regression analysis. Finally, it is to look at whether the professional soldiers have a motivational bias, due to an argument that the military personnel tend to exaggerate the inferiority of their own military power to get more budget for defense construction. Research in 2002 and 2003 tell us that South Korean military power is slightly inferior to North Korea's. However, research in 2005 shows that military power of South and North Korea is almost equal. The sub-fields in which South Korea is superior are in the order of War Sustainability, Information Warfare, Air Force, and Navy. North Korea is regarded to be superior in the fields of Atomic Biological Chemical Warfare Capability, Special Force, Reserve Mobilization, and Army. The higher ranked soldiers tend to evaluate that the North is superior to the South.

• Journal of the Korean Society of Radiology
• /
• v.14 no.4
• /
• pp.425-431
• /
• 2020

When a radiation generating device is installed in an export container due to COVID-19, the purpose of this study was to measure the space dose in the radiation room and to study the effectiveness of the shielding wall in the laboratory. Air dose measurement method was set behind the X-ray tube, 50 cm, 100 cm, 200 cm, and measured 12 locations. The dose values before and after the use of the movable radiation shielding wall were compared by measuring 3 locations behind the X-ray tube using the movable radiation shielding wall. The measured values were 50 cm on the left behind the X-ray tube: 1.446 μSv, behind the X-ray tube: 0.545 μSv, and 50 cm on the right behind the X-ray tube: 1.466 μSv. Measurements behind the radiation barrier were 0.190 μSv, 0.204 μSv, and 0.191 μSv. As a result of performing the corresponding sample t test of the average value according to the use of movable barrier walls, p <0.001 was found. As a result of the actual measurement, the medical exposure of the examiner due to the shielding wall in the laboratory decreased to 82.3%. In order to reduce occupational exposure in screening radiological laboratories, it is recommended that sufficient separation from radiation sources and the use of shielding walls are recommended.