• Journal of the Korean Society of Tobacco Science
• /
• v.24 no.2
• /
• pp.75-81
• /
• 2002

This study was performed to investigate the influence of curing conditions on the composition of essential oil during curing process of burley tobacco leaves. The curing conditions were the primed curing in vinyl house (house-curing), air-curing barn (air-curing) and stalk-curing in conventional curing house (stalk-curing). Total 90 compounds are identified from the steam volatile oils of harvest and cured tobacco leaves by GC and GC-MS, respectively. The major components were neophytadiene, hexadecanoic acid, 3,8,13-duvatriene-1,5-diols, oxide-9-methylene-3,13-duvadienols, solanone, megastigma-4,6,8-trien-3-ones, phenylacetaldehyde, $\beta$-phenylethyl alcohol, indole, dihydroactinidiolide and phytol. The amount of alcoholic compounds was decreased more than approximately 50% in cured leaves without regard to the curing conditions. $\beta$-Phenylethyl alcohol and 3,8,13-duvatriene-1,5-diols were decreased more in air curing and stalk curing than in house curing. The amounts of phenylacetaldehyde, solanone, $\beta$-damascone, $\beta$ -damascenone, oxysolanone and megastigma-4,6,8-trien-3-ones as ketonic compounds, dihydroactinidiolide and indole as miscellaneous compounds in air-cured and stalk-cured tobacco leaves were 2 times higher than those in house-cured leaves, while esteric and acidic compounds were not changed largely in content by curing conditions.

• Journal of the Korean Society of Tobacco Science
• /
• v.21 no.1
• /
• pp.5-9
• /
• 1999

In recent years, the line of increase in policy on tobacco production triggered a rise in the loading volume per bulk curing barn, and manufacturers boosted the output of their blowers in order to prevent dirty leaves in the process of curing. for this reason, we studied the effect of the reducing air flow in bulk curing chamber from the color fixing stage to the stem drying stage of flue curing process on physical properties of cured leaves. The control of air flow was composed of the reducing air velocity of blower by means of a voltage regulator (slidac), and condition before color fixing stage was all the same with the conventional curing method. As a result, an effectiveness of improvement in the physical properties of cured leaves were observed. The leaves cured by this method were somewhat orange in color of upper stalk position, better bodied, and less brittle compared with the leaves produced by conventional curing. However, the leaves cured by this method had a little sharpness and harshness. As to the physical properties, there was decreased in occurrence of flat leaves than that of conventional ones. On the other hand, in case of reducing air flow during the curing process, increase of price per kg reached to about 5 % compared with those of conventional curing method.

• Journal of the Korean Society of Tobacco Science
• /
• v.22 no.2
• /
• pp.114-122
• /
• 2000

This study was carried out to investigate the changes in the composition of essential oils for the improvement of air-curing process of burley tobacco leaves. From the essential oils isolated from the cured tobacco leaves by steam distillation method, 90 compounds including 15 acids and esters, 19 alcohols, 23 aldehydes and ketones, 19 hydrocarbons, and 14 miscellaneous compounds, could be identified by gas chromatography and gas chromatography-mass spectrometry. Among them, acids and esters were gradually decreased during the progress of curing after harvesting. A rapid increase in alcohol content was observed in the earlier stage of curing, but thereafter, decrease followed until the end of curing However, aldehyde and ketone groups were continuously increased during curing and were 3 times higher in quantity after curing than at the harvesting time. The concentration of hydrocarbons was increased in the earlier stage of curing, but gradually decreased from the middle stage. The miscellaneous compounds were continuously increased in content until the end stage of curing, with rapid increased in the earlier stage of curing.

• Journal of the Korean Society of Tobacco Science
• /
• v.25 no.1
• /
• pp.39-46
• /
• 2003

The essential oils from Burley 21 tobacco was isolated by using the SDE (Simultaneous Distillation & Extraction) apparatus coupled with gas chromatography and mass spectrometry analysis. Burley 21 tobaccos were divided and collected by six stages at intervals of five days during air-curing process. Air curing was conducted with horizontal hanging method in greenhouse settled by shading materials. 55 components were identified by comparisons of retention indices and mass spectral data, including 22 hydrocarbons, 6 alcohols, 3 aldehydes, 9 ketones and 15 miscellaneous compounds. Neophytadiene was the major components of the oils and almost all hydrocarbons were gradually decreased during air-curing process. Most of alcohols were also diminished, on the contrary, 1-pentanol and benzyl alcohol among them were increased. Aldehydes and ketones were increased during air-curing and especially, the concentrations of solanone, $\beta$-damascone, $\beta$-damascenone and megastigmatrienones were much increased. Indole level of miscellaneous compounds were continuously increased during air-curing of Burley 21 tobacco.

• Journal of the Korean Society of Tobacco Science
• /
• v.21 no.2
• /
• pp.182-187
• /
• 1999

A bulk curing experiment was carried out to evaluate the effect of air flow reduction in the bulk barn from color fixing stage in the chemical properties of cured leaves, The air flow was controlled by reducing air velocity of a blower from 0.3m/sec to 0.2m/sec using a boltage regulator(Slidac). The bulk curing before color fixing stage was processed in the conventional curing method. Reduction of air circulation in bulk barn did not affected so much on change of the contents of the main chemical components in cured leaved, such as nicotine, total sugar, total nitrogen, petroleum ether extract, and organic acids. Only a slight increase in essential oil contents, such as solanone, damascenone, damascone, $\beta$-ionone, and megastigmatrienone isomer, could be observed in leaves cured in the reduced air flow.

• Journal of the Semiconductor & Display Technology
• /
• v.9 no.2
• /
• pp.73-78
• /
• 2010

This research is about the drying and curing characteristic of conductivity metallic ink on-line curing device in order to improve the curing time for productivity in RFID Gravure printing. The curing process is carried out to increase the electric conductivity after the metallic ink is printed on the substrate. The metal ink is composed of nano-sized silver or copper particles. In this research, the combined IR and Hot air curing system is used and its results is compared with those of oven, IR and Hot Air type respectively. Generally the curing time in the past is about 3 minutes. But the combined system (IR+Hot Air) in this research shows that curing time is less than 30 seconds. These results is much faster than those of other system. This study can be help to make Roll-to-Roll drying and curing process for mass and continuous production on-line.

• Journal of the Korean Society of Tobacco Science
• /
• v.22 no.2
• /
• pp.107-113
• /
• 2000

This study was carried out to investigate the changes in composition of the non-volatile organic acid, fatty acid and polyphenolic compounds during air-curing in burley tobacco leaves, and the effect of curing methods on the contents in air-cured leaves. The air-cured variety, (Nicotiana tabacum cv KB108) was normally grown at the Chonju tobacco experiment station in 1998. Plants designated for the each curing methods were harvested on the same date, and the ripe leaves for primed curing were harvested at the tenth leaf position from the top on the stalk. The major compounds of non-volatile organic acid and fatty acid were malic, citric, oxalic, palmitic, and linolenic acid. The concentrations of malic acid, unsaturated fatty acids, chlorogenic acid and rutin in cured leaves were remarkably decreased during curing, while citric acid was increased. The changes of these compounds showed the similar pattern during both primed and stalk curing. In connection with curing methods, the contents of malic, linoleic and linolenic acid were higher in excessive cured leaves than those in primed cured or stalk cured leaves, while the content of citric acid was lower in excessive cured leaves than that in primed cured or stalk cured leaves.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2011.11a
• /
• pp.237-239
• /
• 2011

This study was performed to investigate the influence of curing temperature on the properties of light weight foamed concrete, manufactured on-site construction according to the various experimental factor such as temperature of material, curing temperature in air(5, 10, 20℃), curing time in air(5, 10, 15hour), and target density of hardened state(0.8, 1.2t/㎥). As a result, the influence of the curing temperature on various properties of foamed concrete is greater than curing time. When increasing temperature and time in air curing, progress of hydration is fast and compressive strength is increasing more and more. However, when considering the productivity, minimum curing time is required 15hours at 5℃, 10hours at 10℃, and 5hours at 20℃. If this condition is not required, there is some crack due to volume expansion on the surface of light weight foamed concrete.

• Journal of the Korean Society of Tobacco Science
• /
• v.29 no.2
• /
• pp.66-73
• /
• 2007

This study was carried out to investigate the changes of curing condition on microclimate of temperature, relative humidity during curing process of burley tobacco leaves. The developed facility, ridge opening type was designed to open the central top roof. The air-cured variety, (N. tabacum cv KB111) was normally grown at the Eumseong tobacco experimental station in 2007. Mean daily temperature of $3^{\circ}C$ in ridge opening type curing facility was lower than that of conventional, whereas mean daily relative humidity of 12.6 % RH was lower in conventional curing facility for the entire stage of curing. The frequency distribution of optimal air temperature at daytime was higher 37.5 % in ridge opening type curing facility than that of conventional, while that of optimal relative humidity was lower 8.2 %. In the ridge opening type curing facility, the excessive drying leaves were low, however the price per kilogram was high. These results suggest that the new developed curing facility may be applied to improved microclimate inside the curing facility for curing burley.

• Journal of the Korean Society of Tobacco Science
• /
• v.2 no.1
• /
• pp.61-67
• /
• 1980

The greenhouse hulk curing and drying system utilizing the direct solar energy was tested to see how much fuel could be saved for curing flue-cured tobacco at the Daegu Experiment Station, Korea Tobacco Research Institute (North latitute: 35$^{\circ}$49'), in 1979. The structure consists of transparent fiberglass exterior, polyurethan boards covered with galvanized iron as the heat absorbers and insulation boards, air duct in which the air is introduced to the furnace room of bulk curing barn, and gravel heat storage system. All exterior surface of heat absorbers, air duct, and gravels were coated with black paint. The air temperature and total radiation were 20.5 to 35.5$^{\circ}C$ and 1004.2 to 1436.2 cal/$\textrm{cm}^2$ during the 3 replicated curing tests, respectively. The greenhouse bulk curing and drying system was able to cut fuel consumption by 25 percent compared with the conventional bulk curing barn. The maximum temperatures for the top absorber and the inlet air of the system were 89$^{\circ}C$ and 64$^{\circ}C$, respectively, and the average temperature of inlet air was higher than that of conventional one by 18$^{\circ}C$.