• Proceedings of the KSME Conference
• /
• 2005.11a
• /
• pp.80.2-80.2
• /
• 2005

• Proceedings of the Korean Fiber Society Conference
• /
• 1996.04a
• /
• pp.99-102
• /
• 1996

• Journal of the KSME
• /
• v.35 no.1
• /
• pp.36-45
• /
• 1995

주노즐내의 공기제트의 효율을 높이기 위해, 주노즐 제트 속도는 높을수록 높은 마찰력을 초래 하여 위사의 속도를 증가시킨다. 가속관의 길이가 증가하면 노즐출구에서의 공기의 속도와 난 류가 감소하며; 가속관의 직경이 증가할 때에는 공기속도가 감소하며 난류는 증가한다. 탱크압력, 가속관의 길이 등 유동조건에 따라 유동은 니들 끝과 가속관 출구에서 이중 초크(M=1)가 발 생할 수 있다. 에어가이드 직경과 노즐직경의 그 비율이 클수록 제트에 의한 유동의 비말동 반(entrainment)이 크게 된다. 실제 노즐직기내의 유동은 위사를 동반한 유동이므로 위와 같은 정성적인 설명에 위사의 물성치에 따른 고려를 반드시 하여야만 한다. 현장에서의 노즐설계는 노즐형상 자체의 영향은 물론 각종 위사의 물성치에 맞는 압축공기 압력 최적조건이 무엇인가를 찾는 일도 매우 중요하다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.238-241
• /
• 2006

For the effective reduction of structural vibration level it is important to obtain the exciting force components. But, sometimes direct force measurement is infeasible due to the geometric limitation of sensor placement. In this case, indirect force identification becomes useful tool for obtaining input force information. In this paper, indirect force technique was applied to air-jet weaving machine and shows some numerical results.

• Fashion & Textile Research Journal
• /
• v.7 no.1
• /
• pp.101-105
• /
• 2005

This study surveys the warp and weft tension differences between projectile and air-jet looms and analyses the mechanical properties of worsted fabrics for garment with relation of these loom characteristics using KES-FB system. The paper is divided by two parts. In the 1st paper, the worsted fabric is woven as 5 harness satin weave using 1/40 Nm sirofil worsted warp yarn and 1/30 Nm worsted weft yarn by projectile(Sulzer) and air-jet looms(Picanol PAT and OMNI), respectively. The weavability is also analysed by measuring warp tension variation according to the warp position and weft tension of 3 kinds of looms. The relationship between shed amount and the warp tension is surveyed, and the relationship between end breaks and warp and weft tensions is also discussed.

• Fashion & Textile Research Journal
• /
• v.7 no.1
• /
• pp.106-110
• /
• 2005

This research surveys the mechanical properties of worsted fabrics for garment according to the loom characteristics and fabric positions with relation to the warp and weft weaving tensions on the projectile and air-jet looms, which is previously surveyed in the 1st paper. For this purpose, the grey fabrics are processed in dyeing and finishing processes. The mechanical properties of the finished fabrics are measured and discussed with relation to the warp and weft weaving tensions of projectile and air-jet looms and the variations of the fabric mechanical properties according to the fabric positions are also surveyed for investigating the homogeneity of the tailorability and fabric hand.

• 한국전산유체공학회:학술대회논문집
• /
• 1998.05a
• /
• pp.168-173
• /
• 1998

A numerical analysis of axisymetric backward facing step main nozzle flow in air jet loom has been accomplished. To obtain basic design data for an optimum main nozzle for an air-jet loom and to predict the transonic/supersonic flow, a characteristic based upwind flux difference splitting compressible Navier-Stokes method has been used. The wall static pressure of the main nozzle and the flow velocity changes in the nozzle tube were analyzed by changing air tank pressures and acceleration tube lengths. The flow inside the nozzle experiences double choking one at the needle tip and the other at the acceleration tube exit at tank pressures over $4kg_f/cm^2$. The tank pressure $P_t$ leading to the critical condition depends on the acceleration tube length; i.e, $P_t$ is higher for longer acceleration tubes. The $P_t$ value required to bring the acceleration tube exit to the critical condition is nearly constant regardless of acceleration tube length. The round needle tip shape might lead to less total pressure loss when compared with step shape.