• Magazine of the Korean Society of Agricultural Engineers
• /
• v.40 no.2
• /
• pp.159-170
• /
• 1998

This study was initiated to investigate the applicability of the dredged soil from agricultural reservoirs on the crop cultivation. Four reservoirs were selected for this experiment, and properties of the dredged soils were analyzed physically and chemically. Soil textures were sandy loam(SL), silty loam(SiL), gravelly loam(GL), graveHy silty loam(GSiL), respectively. General chemical components, organic matter contents, main cations, heavy metals, etc. showed no adverse effects on crop growth. Tomato, cucumber, radish, Chinese cabbage were cultivated during 8 months period, in the soil treated with fertilizer and compost(Tmt.1), fertilizer(Tmt.2), compost(Tmt.3) and none (Tmt.4). Data for plant height, root zone depth and crop yield were collected and analyzed, and the yield for most crops showed increase as Tmt.1 >Tmt.2>Tmt.3>Tmt.4 by fertilizing methods, and as GL>GSiL>SL>SiL by soil textures. From the results, the crop cultivation using dredged soil was considered to be effective, due to its soil texture, organic matter content and fertilization.

• The Korean Journal of Pesticide Science
• /
• v.11 no.1
• /
• pp.32-37
• /
• 2007

The study was carried out to establish buffer zone for the protection of the non-target organisms by aerial pesticide application. The two pesticide combination of 3-way tank-mixing of three pesticides for aerial application, ferimzone tricyclazole SC + BPMC EC + validamycin-A SL and hexaconzole EC + isoprothiolane EC+phenthoate EC were selected for the simultaneous control of key pests on paddy rice as blast, sheath blight, brown planthopper and moth. Aquatic organisms including killifish and loach in the paddy field and nearby water reservoirs were not affected by aerial application of the pesticides. However, all the water flea were killed, when they were exposed 10 m from the aerially sprayed site, while the water flea exposed in 30 m away from the site were not affected. Honeybees within 50 m in the wind direction and 20 m in the opposite wind direction showed a mortality of $7{\sim}100%$. Residues concentration of the pesticides in paddy water were not detectable level after six days from aerial application. Drifting distance of aerially sprayed droplet from the target area was within 30 m in the wind direction and 20 m in the opposite direction. Consequently, it was the buffer zones in the aerial pesticides application for the protection of the non-target organisms should be at least 50 m for aquatic organisms and 100 m for honeybees.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.10 no.4
• /
• pp.113-120
• /
• 2008

The increase in average air temperature over the past 100 years in northern Asia including Korea is the greatest (about ${1.5}^{\circ}C$) among the various regions of the world. Considering a further warming projected by the IPCC, fluctuations of agro-climatic indices under climate change must precede an evaluation of vulnerability. The purpose of this study is to analyze how climate changes represented by global warming have altered agro-climatic indices in Korea over various time scales. Drought index during the rice-transplanting period of 15 May to 5 June has changed toward the favorable with recently increased precipitation in the Taebaek Alpine and Semi-Alpine Zone, and Yeongnam Basin and Inland Zone. The frequency of low temperature occurrence below $13^{\circ}C$ during the rice transplanting has decreased, while climatic production index (CPI) has fallen because of the decreased sunshine hour and increased temperature during the rice ripening period. We therefore concluded that the recent change of climate conditions was against the rice productivity in Korea.

• The Journal of Engineering Geology
• /
• v.14 no.4 s.41
• /
• pp.469-485
• /
• 2004

The purpose of this study is to investigate the hydrochemical characteristics of groundwater in the Umsung area, and to elucidate the effect of host rock type, well depth and mineralization zone on the groundwater chemistry. The geology of the study area consists of Jurassic granite and Cretaceous sedimentary rocks, which are bounded by a fault. Most of shallow groundwaters exploited in the Jurassic granite area are used for agricultural purpose, whereas the deep groundwaters in the Cretaceous sedimentary rocks are used for a drinking water. The shallow groundwater shows weak acidic pH, the electrical conductivity ranging from $142\;to\;903\;{\mu}S/cm$, and the chemical type of $Ca-HCO_3\;to\;Ca-Cl(SO_4,\;NO_3)$. A few of shallow groundwaters are contaminated by nitrate, and show high concentration of Fe, Mn and Zn, that reflects the effect of a mineralization zone. The deep groundwater shows neutral to weak alkaline pH, higher electrical conductivity than that of shallow groundwater, and the chemical type of $Ca-HCO_3$. The seepage water from the abandoned mines does not have the characteristics such as acidic pH, high concentration of heavy metals and high sulfate content. The hydrogen and oxygen isotopes of groundwater indicates an altitude effect of the recharge area between deep groundwater and shallow groundwater. In conclusion, the chemical composition of groundwater complicately reflects the effects of their host rocks, well depth, agricultural activity and mineralization zone in the study area.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.1 no.2
• /
• pp.135-141
• /
• 1999

The information on agricultural weather over the Korean Peninsula was produced, using the Bio-sphere-Atmosphere Transfer Scheme(BATS). We modified the input and output portions of BATS such that the whole processes can be excuted as a package. Based on this approach, automatic production system of agricultural meteorology information was developed. The results of this model was compared with the observed data. The differences between the model results and observed data for surface temperature, rooting zone temperature and top soil temperature were 2.0$^{\circ}$C, 2.0$^{\circ}$C and 2.6$^{\circ}$C, respectively.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.33 no.2
• /
• pp.104-111
• /
• 1991

In Korea, small-scale reclaimed areas have been suffering from many problems because of the lack of comprehensive developing strategy although considerable investments have been inputed by the public sector since 1970's. For 3 reclaimed sites in Chonnam Province choser as case study areas, the analysis, the second attempt of widely-spanned studies on areal conditions, concentrated on their farming and economic conditions. Its results were as follows ; 1. Although farming pattern has been transferred to the full4ime rice cropping type by the creation of reclaimed paddy field, farming size in the areas has not been increased more than that in existing agricultural areas. This means that agricultural planning should be included in the initial stage of reclamation projects, especially with reference to the substantial enlargement of farming size. 2. Block parcelling of severely fragmented holdings in new and old lands should be carried out, which can make farming activities efficient and farming route shortened. In large-scale reclaimed areas, new village planning could be considered in its central zone for efficent farming. 3. Because soil in the areas contains much more salt and water than that in other areas, new design methodology should be introduced for the efficient use of agricultural machines in reclaimed areas. 4. There are deep-seated economic problems in reclaimed area, which have been caused by very poor level and agriculturally dominated structure of household income. These problems should motivate farmers to give up positive action for qualitative and quantitative improvement in farming.

• Journal of Climate Change Research
• /
• v.7 no.4
• /
• pp.507-512
• /
• 2016

This study was conducted to classify agroclimatic zones in South Korea. To classify the agroclimatic zones, such climatic factors as amount of rainfall from April to May, amount of rainfall in October, monthly average air temperature in January, monthly average air temperature from April to May, monthly average air temperature from April to September, monthly average air temperature from December to March, monthly minimum air temperature in January, monthly minimum air temperature from April to May, Warmth Index were considered as major influencing factors on the crop growth. Climatic factors were computed from monthly air temperature and precipitation of climatological normal year (1981~2010) at 1 km grid cell estimated from a geospatial climate interpolation method. The agroclimatic zones using k-means cluster analysis method were classified into 6 zones.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2001.09a
• /
• pp.94-103
• /
• 2001

An experiment was conducted using a sand and gravel-filled tank model, to investigate the influence on the GPR response of vadose zone gasoline vapor phase effects and residual gasoline distributed by a fluctuating water table. After background GPR measurements were made with only water in the tank, gasoline was injected into the bottom of the model tank to simulate a subsurface discharge from a leaking pipe or tank. Results from the experiment show the sensitivity of GPR to the changes in the moisture content and its effectiveness for monitoring minor fluctuation of the water table. The results also demonstrate a potential of GPR for detecting possible vapor phase effects of volatile hydrocarbons in the vadose zone as a function of time, and for detecting the effects of residual phase of hydrocarbons in the water saturated system. In addition, the results provide the basis for a strategy that has the potential to successfully detect and delineate LNAPL contamination at field sites where zones of residual LNAPL in the water saturated system are present in the subsurface.

• Korean Journal of Materials Research
• /
• v.25 no.8
• /
• pp.370-375
• /
• 2015

In this study, to confirm the effect of alloying elements on the phase transformation and conditions of the friction stir process, we processed two materials, SS400 and SM45C steels, by a friction stir process (FSP) under various conditions. We analyzed the mechanical properties and microstructure of the friction stir processed zone of SS400 and SM45C steels processed under 400RPM - 100mm/min conditions. We detected no macro (tunnel defect) or micro (void, micro crack) defects in the specimens. The grain refinement in the specimens occurred by dynamic recrystallization and stirring. The microstructure at the friction stir processed zone of the SS400 specimen consisted of an ${\alpha}$-phase. On the other hand, the microstructure at the friction stir processed zone of the SM45 specimen consisted of an ${\alpha}$-phase, $Fe_3C$ and martensite due to a high cooling rate and high carbon content. Furthermore, the hardness and impact absorption energy of the friction stir processed zone were higher than those of base metals. The hardness and impact absorption energy of FSPed SM45C were higher than that of FSPed SS400. Our results confirmed the effect of alloying elements on the phase transformation and mechanical properties of the friction stir processed zone.

• Computers and Concrete
• /
• v.33 no.5
• /
• pp.621-630
• /
• 2024

This study presents novel electromagnetic wave-based methods for evaluating the integrity of cement-based structures using time domain reflectometry (TDR). Two cement-based plates with embedded rebars are prepared under sound and defective conditions. TDR tests are carried out using transmission lines with various numbers of artificial joints, and electromagnetic waves are measured to assess the integrity of the plates. The experimental results show that the travel time of electromagnetic waves is consistently longer in sound plates than in defective ones, and an increase in the reflection coefficients is observed in the defect zone of the defective plates. Electromagnetic wave velocities are higher in the defective plates, especially when connectors are present in the transmission line. A novel approach based on the area of the reflection coefficient provides larger areas in the defective plates, and the attenuation effect of the electromagnetic waves induces a difference in the areas of the reflection coefficient between the two defect conditions. An alternative method using the centroid of the defect zone slightly overestimates the location of the defect zone. The length of the defect zone is estimated using the defect ratio and wave velocities of cement, air, and plate. The length of the defect zone can also be calculated using the travel times within the plate, total measured length of the plate, and wave velocities in the cement and air. Therefore, the electromagnetic wave-based methods proposed in this study may be useful for estimating the location and length of defect zones by considering attenuation effects.