• KSBB Journal
• /
• 제5권4호
• /
• pp.391-396
• /
• 1990

4.0$\times$10-3 (IU/cells/day) of maximum specific scu-PA production, which was higher than those by a 75$\textrm{cm}^2$ T-flask and conventional perfusion systems, was maintained by tube-type bioreactor at 0.35 (1/h) of perfusion rate corresponding to 0.15 (dynes/$\textrm{cm}^2$) of shear stress. The production of scu-PA is also increased as shear stress was slowly increased, which is similar to natural human blood circulation. The tube reactor proves that there may be no limitation of oxygen supply by showing 1.0 (1/h) of oxygen transfer coefficient at steady state and this system yields much lower shear stress of 0.3(dynes/$\textrm{cm}^2$) than that of 5-8(dynes/$\textrm{cm}^2$) by conventional agitation systems.

• Nuclear Engineering and Technology
• /
• 제35권3호
• /
• pp.191-205
• /
• 2003

Effects of the width and location of a flow disturbing circular plate, installed at a vertical tube surface, on nucleate pool boiling heat transfer of water at atmospheric pressure have been investigated experimentally. Through the tests, changes in the degree of intensity of liquid agitation have been analyzed. The plate changes the fluid flow around the tube as well as heat transfer coefficients on the tube surface. It is identified that the plate width changes the rate of the circulating flow whereas its location changes the growth of the active agitating flow. Moreover, the flow chugging was observed at the downside of the plate.

• 복식
• /
• 제5권
• /
• pp.153-163
• /
• 1981

Since Korea opened the door to the Western World, traditional costume has changed. The factors of change are as follows: 1) Cultural diffusion by the cultural contact is the foundamental factor of the costume change. 2) The government made edicts of clothing reform. The formal dresses of government official were simplified several times, the edict was issued for men to cut off their hair, and military uniform and government officials' dresses were west-ernized. 3) The diffusion of modernized education by the missionary school accerlerated clothing change. Students were ahead of the abolition of Suege-Chima (which is a sort of veil used to conceal woman's face). 4) The change in the activity of women in society made the women's dresses more convenient for action. 5) The open class system and social agitation speeded up the rate of change. During the Yi Dynasty class distinction was rigid, but the government made the laws which abolished the class distiction.

• Journal of Microbiology and Biotechnology
• /
• 제22권7호
• /
• pp.923-929
• /
• 2012

Optimization of culture conditions for L-asparaginase production by submerged fermentation of Aspergillus terreus MTCC 1782 was studied using a 3-level central composite design of response surface methodology and artificial neural network linked genetic algorithm. The artificial neural network linked genetic algorithm was found to be more efficient than response surface methodology. The experimental $_L$-asparaginase activity of 43.29 IU/ml was obtained at the optimum culture conditions of temperature $35^{\circ}C$, initial pH 6.3, inoculum size 1% (v/v), agitation rate 140 rpm, and incubation time 58.5 h of the artificial neural network linked genetic algorithm, which was close to the predicted activity of 44.38 IU/ml. Characteristics of $_L$-asparaginase production by A. terreus MTCC 1782 were studied in a 3 L bench-scale bioreactor.

• Korean Chemical Engineering Research
• /
• 제50권2호
• /
• pp.211-216
• /
• 2012

염화제이철 수용액에 의한 스테인레스 강판의 식각반응에 관한 연구를 수행하였다. 식각액 교반속도, 식각온도, $Fe^{3+}$ 이온 농도, 식각액의 유리산도 및 비중 등 여러 공정변수가 식각속도에 미치는 영향에 대해 조사하였고, 그 결과, AK(aluminum-killed) 철, 크롬(chlomium) 강, 그리고 스테인레스 강(STS430J1L 합금)의 식각반응이 1차 반응식을 잘 따름을 알 수 있었다. 또한 식각액의 피로도(fatigue ratio)가 16% 이하로 유지되면 식각액 내에 슬러지가 발생하지 않으며, 식각된 강판의 표면거칠기 또한 좋아짐을 알 수 있었다. 본 연구에서 조사한 범위 내에서는, 식각액의 보메(Baume)가 증가하면 식각속도는 감소하나 유리산도가 식각속도에 미치는 영향은 미비함을 알 수 있었다. 한편 본 연구의 실험결과는 공정모델링을 통해 유도된 식각속도식의 계산결과와 잘 일치함을 알 수 있었다.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2003년도 생물공학의 동향(XIII)
• /
• pp.341-345
• /
• 2003

형질전환된 담배세포 배양을 이용한 hGM-CSF 생산에 있어 polyurethane foam 내 고정화법을 이용하여 연속배양의 가능성을 확인하였고 spinner flask에서의 배양에 따른 영향을 알아보았다. 16일 동안 3번의 배지교환에도 세포의 활성이 유지되어 hGM-CSF 생산량은 계속적으로 증가하였다. 온도와 교반속도를 동일하게 하였을 때 spinner flask에서의 hGM-CSF 생산량은 17.3 ${\mu}g/L$으로 100-mL flask의 9.8 ${\mu}g/L$보다 증가하였다. 따라서 최적의 배지교환 속도와 양을 결정하여 spinner flask에서 연속배양을 실시할 경우 세포 재사용이라는 경쟁력과 함께 높은 hGM-CSF 생산량이 얻어질 것으로 예상된다.

• Journal of Microbiology and Biotechnology
• /
• 제19권12호
• /
• pp.1603-1611
• /
• 2009

High-cell-density cultivation of yeast was investigated using the agricultural waste products corn steep liquor (CSL) and molasses. The Saccharomyces cerevisiae KV-25 cell mass was significantly dependent on the ratio between C and N sources. The concentrations of molasses and CSL in the culture medium were statistically optimized at 10.25% (v/v) and 16.87% (v/v), respectively, by response surface methodology (RSM). Batch culture in a 5-l stirred tank reactor using the optimized medium resulted in a cell mass production of 36.5 g/l. In the fed-batch culture, the feed phase was preceded by a batch phase using the optimized medium, and a very high dried-cell-mass yield of 187.63 g/l was successfully attained by feeding a mixture of 20% (v/v) molasses and 80% (v/v) CSL at a rate of 22 ml/h. In this system, the production of cell mass depended mainly on the agitation speed, the composition of the feed medium, and the glucose level in the medium, but only slightly on the aeration rate.

• 한국미생물·생명공학회지
• /
• 제24권6호
• /
• pp.756-762
• /
• 1996

In order to develop the method for mass production of natural food colorant from Monascus anka, optimum cultivation conditions for producing red and yellow pigments by cultiva- ting the mold in a jar fermenter and their color characteristics were investigated. The mold produced red and yellow pigments both intracellularly and extracellularly. These pigments showed unique light absorption characteristics with maximum absorption of 494, 380, 506, and 388 nm for extracellular red pigment (ERP), extracellular yellow pigment (EYP), intracellular red pigment (IRP), and intracellular yellow pigment (IYP), respectively. Optimum conditions for producing red pigments were found to be temperature 30$\circ$C, initial pH 6.0, rice powder 3-5%, peptone 0.05%, magnesium sulfate 0.25%, aeration rate 0.1 vvm. Optimum temperature for producing yellow pigments was around 35$\circ$C which is higher than that of producing red pigments. The initial pH and rice powder concentration for producing yellow pigments were the same as those of producing red pigments. The higher concentration of nitrogen source and inorganic salt, aeration rate, the more the yellow pigments were produced. The optimum agitation speed was 100 - 300 rpm for pigment production.

• Journal of Dental Anesthesia and Pain Medicine
• /
• 제17권1호
• /
• pp.13-20
• /
• 2017

Cleft palate is one of the most common congenital malformations of the oral and maxillofacial region, with an incidence rate of around 0.1%. Early surgical repair is the only method for treatment of a cleft lip and palate. However, because of the use of inhalation anesthesia in children and the physiological characteristics of the cleft palate itself combined with the particularities of cleft palate surgery, the incidence rate of postoperative emergence agitation (EA) in cleft palate surgery is significantly higher than in other types of interventions. The exact mechanism of EA is still unclear. Although restlessness after general anesthesia in children with cleft palate is self-limiting, its effects should be considered by clinicians. In this paper, the related literature on restlessness after surgery involving general anesthesia in recent years is summarized. This paper focuses on induction factors as well as prevention and treatment of postoperative restlessness in children with cleft palate after general anesthesia. The corresponding countermeasures to guide clinical practice are also presented in this paper.

• 한국산업정보학회논문지
• /
• 제17권1호
• /
• pp.1-9
• /
• 2012

본 논문은 태양전지용 실리콘 잉곳 절삭시 발생하는 폐 슬러지에서 실리콘, 연마재를 분리 회수 재사용하는 시스템에 관한 것이다. 분리시스템의 기본 공정은 다중원심분리이고 분리 효율을 높이기 위해 초음파 교반, 알코올 물 가수, 가열처리를 하였다. 실리콘의 경우 2N의 경우 96% 회수율을 보였고, 4N의 경우 94%의 회수율을 보였다. 연마재인 SiC의 경우에는 약 80%의 회수율을 보였다. 4N의 고순도 Si 회수를 위해서는 진공열처리를 수행하여 잔류성분을 제거하였다.